@@ -36,38 +36,51 @@
/* Mach specific information to be recorded in the C-state driver_data */
struct omap3_idle_statedata {
- u32 mpu_state;
- u32 core_state;
+ u8 mpu_state;
+ u8 core_state;
+ u8 per_min_state;
};
+/*
+ * Prevent PER OFF if CORE is not in RETention or OFF as this would
+ * disable PER wakeups completely.
+ */
static struct omap3_idle_statedata omap3_idle_data[] = {
{
.mpu_state = PWRDM_POWER_ON,
.core_state = PWRDM_POWER_ON,
+ /* In C1 do not allow PER state lower than CORE state */
+ .per_min_state = PWRDM_POWER_ON,
},
{
.mpu_state = PWRDM_POWER_ON,
.core_state = PWRDM_POWER_ON,
+ .per_min_state = PWRDM_POWER_RET,
},
{
.mpu_state = PWRDM_POWER_RET,
.core_state = PWRDM_POWER_ON,
+ .per_min_state = PWRDM_POWER_RET,
},
{
.mpu_state = PWRDM_POWER_OFF,
.core_state = PWRDM_POWER_ON,
+ .per_min_state = PWRDM_POWER_RET,
},
{
.mpu_state = PWRDM_POWER_RET,
.core_state = PWRDM_POWER_RET,
+ .per_min_state = PWRDM_POWER_OFF,
},
{
.mpu_state = PWRDM_POWER_OFF,
.core_state = PWRDM_POWER_RET,
+ .per_min_state = PWRDM_POWER_OFF,
},
{
.mpu_state = PWRDM_POWER_OFF,
.core_state = PWRDM_POWER_OFF,
+ .per_min_state = PWRDM_POWER_OFF,
},
};
@@ -207,10 +220,9 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
- int new_state_idx;
- u32 core_next_state, per_next_state = 0, per_saved_state = 0;
+ int new_state_idx, ret;
+ u8 per_next_state, per_saved_state;
struct omap3_idle_statedata *cx;
- int ret;
/*
* Use only C1 if CAM is active.
@@ -231,25 +243,13 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
/* Program PER state */
cx = &omap3_idle_data[new_state_idx];
- core_next_state = cx->core_state;
- per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd);
- if (new_state_idx == 0) {
- /* In C1 do not allow PER state lower than CORE state */
- if (per_next_state < core_next_state)
- per_next_state = core_next_state;
- } else {
- /*
- * Prevent PER OFF if CORE is not in RETention or OFF as this
- * would disable PER wakeups completely.
- */
- if ((per_next_state == PWRDM_POWER_OFF) &&
- (core_next_state > PWRDM_POWER_RET))
- per_next_state = PWRDM_POWER_RET;
- }
- /* Are we changing PER target state? */
- if (per_next_state != per_saved_state)
+ per_next_state = pwrdm_read_next_pwrst(per_pd);
+ per_saved_state = per_next_state;
+ if (per_next_state < cx->per_min_state) {
+ per_next_state = cx->per_min_state;
pwrdm_set_next_pwrst(per_pd, per_next_state);
+ }
ret = omap3_enter_idle(dev, drv, new_state_idx);
The OMAP3xxx CPUIdle driver contains some code to place a lower bound on the PER powerdomain's power state. Convert this code to a data-driven implementation to remove branches and to improve readability. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> --- arch/arm/mach-omap2/cpuidle34xx.c | 44 +++++++++++++++++++------------------ 1 file changed, 22 insertions(+), 22 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html