| Message ID | 20130509003606.GE31290@titan.lakedaemon.net (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Jason Cooper <jason@lakedaemon.net> [130508 17:41]: > On Wed, May 08, 2013 at 12:45:04PM -0700, Tony Lindgren wrote: > > * Jason Cooper <jason@lakedaemon.net> [130508 12:29]: > > > > > > Tony has been helping me out offline with this, and he suggested trying the > > > gpmc against Linus' ToT. Which locks up before it even has a chance to get > > > going. So this series is against v3.9. > > > > You may have better luck with today's mainline treeand the following fix: > > > > http://lkml.org/lkml/2013/5/8/374# > > Ok, I'm attempting to do that, but got this for 'make dtbs': > > ERROR (phandle_references): Reference to non-existent node or label "usb2_phy" > > ERROR: Input tree has errors, aborting (use -f to force output) > make[1]: *** [arch/arm/boot/dts/omap3-wireless_plus.dtb] Error 2 > make[1]: *** Waiting for unfinished jobs.... > make: *** [dtbs] Error 2 > > which was created by: > > ad871c10 ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards > > It assumes the board has twl4030 (and then includes it). Bootlogs from > the vendor provided kernel don't show a single message from twl4030, so > I've omitted it. > > Assuming I did the correct thing by omitting the twl4030, I think the > correct answer is to declare the phy in the dts files, like so: Thanks, that is correct. We should not assume any PMIC with a processor as it can also be a custom chip. For example, Nokia n8x0 is using their retu + tahvo chips instead of tps chips. I'll apply your patch into omap-for-v3.10/fixes. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Tony Lindgren <tony@atomide.com> [130509 09:03]: > * Jason Cooper <jason@lakedaemon.net> [130508 17:41]: > > On Wed, May 08, 2013 at 12:45:04PM -0700, Tony Lindgren wrote: > > > * Jason Cooper <jason@lakedaemon.net> [130508 12:29]: > > > > > > > > Tony has been helping me out offline with this, and he suggested trying the > > > > gpmc against Linus' ToT. Which locks up before it even has a chance to get > > > > going. So this series is against v3.9. > > > > > > You may have better luck with today's mainline treeand the following fix: > > > > > > http://lkml.org/lkml/2013/5/8/374# > > > > Ok, I'm attempting to do that, but got this for 'make dtbs': > > > > ERROR (phandle_references): Reference to non-existent node or label "usb2_phy" > > > > ERROR: Input tree has errors, aborting (use -f to force output) > > make[1]: *** [arch/arm/boot/dts/omap3-wireless_plus.dtb] Error 2 > > make[1]: *** Waiting for unfinished jobs.... > > make: *** [dtbs] Error 2 > > > > which was created by: > > > > ad871c10 ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards > > > > It assumes the board has twl4030 (and then includes it). Bootlogs from > > the vendor provided kernel don't show a single message from twl4030, so > > I've omitted it. > > > > Assuming I did the correct thing by omitting the twl4030, I think the > > correct answer is to declare the phy in the dts files, like so: > > Thanks, that is correct. We should not assume any PMIC with a processor > as it can also be a custom chip. For example, Nokia n8x0 is using their > retu + tahvo chips instead of tps chips. > > I'll apply your patch into omap-for-v3.10/fixes. I mean omap-for-v3.10/dt-fixes instead of fixes since it's .dts changes. > Regards, > > Tony > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 5a31964..3046d1f 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -122,6 +122,7 @@ &usb_otg_hs { interface-type = <0>; + usb-phy = <&usb2_phy>; mode = <3>; power = <50>; }; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index 05f51e1..96d1c20 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -68,6 +68,7 @@ &usb_otg_hs { interface-type = <0>; + usb-phy = <&usb2_phy>; mode = <3>; power = <50>; }; diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index d4a7280..a626c50 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -73,6 +73,7 @@ &usb_otg_hs { interface-type = <0>; + usb-phy = <&usb2_phy>; mode = <3>; power = <50>; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 4ad03d9..82a404d 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -519,7 +519,6 @@ interrupts = <0 92 0x4>, <0 93 0x4>; interrupt-names = "mc", "dma"; ti,hwmods = "usb_otg_hs"; - usb-phy = <&usb2_phy>; multipoint = <1>; num-eps = <16>; ram-bits = <12>;