[1/6] ARM: OMAP2+: Remove board-4430sdp.c

Message ID	20130517191751.468.89202.stgit@localhost (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-omap-owner@vger.kernel.org> Subject: [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c To: linux-arm-kernel@lists.infradead.org From: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Date: Fri, 17 May 2013 12:17:51 -0700 Message-ID: <20130517191751.468.89202.stgit@localhost> In-Reply-To: <20130517191304.468.73487.stgit@localhost> References: <20130517191304.468.73487.stgit@localhost> User-Agent: StGit/0.16-1-ga54b MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Sender: linux-omap-owner@vger.kernel.org Precedence: bulk

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index f49cd51..465edd1 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -378,14 +378,6 @@ config MACH_TI8148EVM depends on SOC_TI81XX default y -config MACH_OMAP_4430SDP - bool "OMAP 4430 SDP board" - default y - depends on ARCH_OMAP4 - select OMAP_PACKAGE_CBL - select OMAP_PACKAGE_CBS - select REGULATOR_FIXED_VOLTAGE if REGULATOR - config MACH_OMAP4_PANDA bool "OMAP4 Panda Board" default y diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 55a9d67..875d61d 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -251,7 +251,6 @@ obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o -obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c deleted file mode 100644 index 56a9a4f..0000000 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ /dev/null @@ -1,765 +0,0 @@ -/* - * Board support file for OMAP4430 SDP. - * - * Copyright (C) 2009 Texas Instruments - * - * Author: Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * Based on mach-omap2/board-3430sdp.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/usb/otg.h> -#include <linux/spi/spi.h> -#include <linux/i2c/twl.h> -#include <linux/mfd/twl6040.h> -#include <linux/gpio_keys.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/pwm.h> -#include <linux/leds.h> -#include <linux/leds_pwm.h> -#include <linux/pwm_backlight.h> -#include <linux/irqchip/arm-gic.h> -#include <linux/platform_data/omap4-keypad.h> -#include <linux/usb/musb.h> -#include <linux/usb/phy.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "omap4-keypad.h" -#include <linux/wl12xx.h> -#include <linux/platform_data/omap-abe-twl6040.h> - -#include "soc.h" -#include "mux.h" -#include "mmc.h" -#include "hsmmc.h" -#include "control.h" -#include "common-board-devices.h" -#include "dss-common.h" - -#define ETH_KS8851_IRQ 34 -#define ETH_KS8851_POWER_ON 48 -#define ETH_KS8851_QUART 138 -#define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 -#define OMAP4_SFH7741_ENABLE_GPIO 188 - -#define GPIO_WIFI_PMENA 54 -#define GPIO_WIFI_IRQ 53 - -static const int sdp4430_keymap[] = { - KEY(0, 0, KEY_E), - KEY(0, 1, KEY_R), - KEY(0, 2, KEY_T), - KEY(0, 3, KEY_HOME), - KEY(0, 4, KEY_F5), - KEY(0, 5, KEY_UNKNOWN), - KEY(0, 6, KEY_I), - KEY(0, 7, KEY_LEFTSHIFT), - - KEY(1, 0, KEY_D), - KEY(1, 1, KEY_F), - KEY(1, 2, KEY_G), - KEY(1, 3, KEY_SEND), - KEY(1, 4, KEY_F6), - KEY(1, 5, KEY_UNKNOWN), - KEY(1, 6, KEY_K), - KEY(1, 7, KEY_ENTER), - - KEY(2, 0, KEY_X), - KEY(2, 1, KEY_C), - KEY(2, 2, KEY_V), - KEY(2, 3, KEY_END), - KEY(2, 4, KEY_F7), - KEY(2, 5, KEY_UNKNOWN), - KEY(2, 6, KEY_DOT), - KEY(2, 7, KEY_CAPSLOCK), - - KEY(3, 0, KEY_Z), - KEY(3, 1, KEY_KPPLUS), - KEY(3, 2, KEY_B), - KEY(3, 3, KEY_F1), - KEY(3, 4, KEY_F8), - KEY(3, 5, KEY_UNKNOWN), - KEY(3, 6, KEY_O), - KEY(3, 7, KEY_SPACE), - - KEY(4, 0, KEY_W), - KEY(4, 1, KEY_Y), - KEY(4, 2, KEY_U), - KEY(4, 3, KEY_F2), - KEY(4, 4, KEY_VOLUMEUP), - KEY(4, 5, KEY_UNKNOWN), - KEY(4, 6, KEY_L), - KEY(4, 7, KEY_LEFT), - - KEY(5, 0, KEY_S), - KEY(5, 1, KEY_H), - KEY(5, 2, KEY_J), - KEY(5, 3, KEY_F3), - KEY(5, 4, KEY_F9), - KEY(5, 5, KEY_VOLUMEDOWN), - KEY(5, 6, KEY_M), - KEY(5, 7, KEY_RIGHT), - - KEY(6, 0, KEY_Q), - KEY(6, 1, KEY_A), - KEY(6, 2, KEY_N), - KEY(6, 3, KEY_BACK), - KEY(6, 4, KEY_BACKSPACE), - KEY(6, 5, KEY_UNKNOWN), - KEY(6, 6, KEY_P), - KEY(6, 7, KEY_UP), - - KEY(7, 0, KEY_PROG1), - KEY(7, 1, KEY_PROG2), - KEY(7, 2, KEY_PROG3), - KEY(7, 3, KEY_PROG4), - KEY(7, 4, KEY_F4), - KEY(7, 5, KEY_UNKNOWN), - KEY(7, 6, KEY_OK), - KEY(7, 7, KEY_DOWN), -}; -static struct omap_device_pad keypad_pads[] = { - { .name = "kpd_col1.kpd_col1", - .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, - }, - { .name = "kpd_col1.kpd_col1", - .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, - }, - { .name = "kpd_col2.kpd_col2", - .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, - }, - { .name = "kpd_col3.kpd_col3", - .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, - }, - { .name = "kpd_col4.kpd_col4", - .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, - }, - { .name = "kpd_col5.kpd_col5", - .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, - }, - { .name = "gpmc_a23.kpd_col7", - .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, - }, - { .name = "gpmc_a22.kpd_col6", - .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, - }, - { .name = "kpd_row0.kpd_row0", - .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | - OMAP_MUX_MODE1 | OMAP_INPUT_EN, - }, - { .name = "kpd_row1.kpd_row1", - .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | - OMAP_MUX_MODE1 | OMAP_INPUT_EN, - }, - { .name = "kpd_row2.kpd_row2", - .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | - OMAP_MUX_MODE1 | OMAP_INPUT_EN, - }, - { .name = "kpd_row3.kpd_row3", - .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | - OMAP_MUX_MODE1 | OMAP_INPUT_EN, - }, - { .name = "kpd_row4.kpd_row4", - .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | - OMAP_MUX_MODE1 | OMAP_INPUT_EN, - }, - { .name = "kpd_row5.kpd_row5", - .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | - OMAP_MUX_MODE1 | OMAP_INPUT_EN, - }, - { .name = "gpmc_a18.kpd_row6", - .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | - OMAP_MUX_MODE1 | OMAP_INPUT_EN, - }, - { .name = "gpmc_a19.kpd_row7", - .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | - OMAP_MUX_MODE1 | OMAP_INPUT_EN, - }, -}; - -static struct matrix_keymap_data sdp4430_keymap_data = { - .keymap = sdp4430_keymap, - .keymap_size = ARRAY_SIZE(sdp4430_keymap), -}; - -static struct omap4_keypad_platform_data sdp4430_keypad_data = { - .keymap_data = &sdp4430_keymap_data, - .rows = 8, - .cols = 8, -}; - -static struct omap_board_data keypad_data = { - .id = 1, - .pads = keypad_pads, - .pads_cnt = ARRAY_SIZE(keypad_pads), -}; - -static struct gpio_led sdp4430_gpio_leds[] = { - { - .name = "omap4:green:debug0", - .gpio = 61, - }, - { - .name = "omap4:green:debug1", - .gpio = 30, - }, - { - .name = "omap4:green:debug2", - .gpio = 7, - }, - { - .name = "omap4:green:debug3", - .gpio = 8, - }, - { - .name = "omap4:green:debug4", - .gpio = 50, - }, - { - .name = "omap4:blue:user", - .gpio = 169, - }, - { - .name = "omap4:red:user", - .gpio = 170, - }, - { - .name = "omap4:green:user", - .gpio = 139, - }, - -}; - -static struct gpio_keys_button sdp4430_gpio_keys[] = { - { - .desc = "Proximity Sensor", - .type = EV_SW, - .code = SW_FRONT_PROXIMITY, - .gpio = OMAP4_SFH7741_SENSOR_OUTPUT_GPIO, - .active_low = 0, - } -}; - -static struct gpio_led_platform_data sdp4430_led_data = { - .leds = sdp4430_gpio_leds, - .num_leds = ARRAY_SIZE(sdp4430_gpio_leds), -}; - -static struct pwm_lookup sdp4430_pwm_lookup[] = { - PWM_LOOKUP("twl-pwm", 0, "leds_pwm", "omap4::keypad"), - PWM_LOOKUP("twl-pwm", 1, "pwm-backlight", NULL), - PWM_LOOKUP("twl-pwmled", 0, "leds_pwm", "omap4:green:chrg"), -}; - -static struct led_pwm sdp4430_pwm_leds[] = { - { - .name = "omap4::keypad", - .max_brightness = 127, - .pwm_period_ns = 7812500, - }, - { - .name = "omap4:green:chrg", - .max_brightness = 255, - .pwm_period_ns = 7812500, - }, -}; - -static struct led_pwm_platform_data sdp4430_pwm_data = { - .num_leds = ARRAY_SIZE(sdp4430_pwm_leds), - .leds = sdp4430_pwm_leds, -}; - -static struct platform_device sdp4430_leds_pwm = { - .name = "leds_pwm", - .id = -1, - .dev = { - .platform_data = &sdp4430_pwm_data, - }, -}; - -/* Dummy regulator for pwm-backlight driver */ -static struct regulator_consumer_supply backlight_supply = - REGULATOR_SUPPLY("enable", "pwm-backlight"); - -static struct platform_pwm_backlight_data sdp4430_backlight_data = { - .max_brightness = 127, - .dft_brightness = 127, - .pwm_period_ns = 7812500, -}; - -static struct platform_device sdp4430_backlight_pwm = { - .name = "pwm-backlight", - .id = -1, - .dev = { - .platform_data = &sdp4430_backlight_data, - }, -}; - -static int omap_prox_activate(struct device *dev) -{ - gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 1); - return 0; -} - -static void omap_prox_deactivate(struct device *dev) -{ - gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 0); -} - -static struct gpio_keys_platform_data sdp4430_gpio_keys_data = { - .buttons = sdp4430_gpio_keys, - .nbuttons = ARRAY_SIZE(sdp4430_gpio_keys), - .enable = omap_prox_activate, - .disable = omap_prox_deactivate, -}; - -static struct platform_device sdp4430_gpio_keys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &sdp4430_gpio_keys_data, - }, -}; - -static struct platform_device sdp4430_leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &sdp4430_led_data, - }, -}; -static struct spi_board_info sdp4430_spi_board_info[] __initdata = { - { - .modalias = "ks8851", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 24000000, - /* - * .irq is set to gpio_to_irq(ETH_KS8851_IRQ) - * in omap_4430sdp_init - */ - }, -}; - -static struct gpio sdp4430_eth_gpios[] __initdata = { - { ETH_KS8851_POWER_ON, GPIOF_OUT_INIT_HIGH, "eth_power" }, - { ETH_KS8851_QUART, GPIOF_OUT_INIT_HIGH, "quart" }, - { ETH_KS8851_IRQ, GPIOF_IN, "eth_irq" }, -}; - -static int __init omap_ethernet_init(void) -{ - int status; - - /* Request of GPIO lines */ - status = gpio_request_array(sdp4430_eth_gpios, - ARRAY_SIZE(sdp4430_eth_gpios)); - if (status) - pr_err("Cannot request ETH GPIOs\n"); - - return status; -} - -static struct regulator_consumer_supply sdp4430_vbat_supply[] = { - REGULATOR_SUPPLY("vddvibl", "twl6040-vibra"), - REGULATOR_SUPPLY("vddvibr", "twl6040-vibra"), -}; - -static struct regulator_init_data sdp4430_vbat_data = { - .constraints = { - .always_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(sdp4430_vbat_supply), - .consumer_supplies = sdp4430_vbat_supply, -}; - -static struct fixed_voltage_config sdp4430_vbat_pdata = { - .supply_name = "VBAT", - .microvolts = 3750000, - .init_data = &sdp4430_vbat_data, - .gpio = -EINVAL, -}; - -static struct platform_device sdp4430_vbat = { - .name = "reg-fixed-voltage", - .id = -1, - .dev = { - .platform_data = &sdp4430_vbat_pdata, - }, -}; - -static struct platform_device sdp4430_dmic_codec = { - .name = "dmic-codec", - .id = -1, -}; - -static struct platform_device sdp4430_hdmi_audio_codec = { - .name = "hdmi-audio-codec", - .id = -1, -}; - -static struct omap_abe_twl6040_data sdp4430_abe_audio_data = { - .card_name = "SDP4430", - .has_hs = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, - .has_hf = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, - .has_ep = 1, - .has_aux = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, - .has_vibra = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, - - .has_dmic = 1, - .has_hsmic = 1, - .has_mainmic = 1, - .has_submic = 1, - .has_afm = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, - - .jack_detection = 1, - /* MCLK input is 38.4MHz */ - .mclk_freq = 38400000, -}; - -static struct platform_device sdp4430_abe_audio = { - .name = "omap-abe-twl6040", - .id = -1, - .dev = { - .platform_data = &sdp4430_abe_audio_data, - }, -}; - -static struct platform_device *sdp4430_devices[] __initdata = { - &sdp4430_gpio_keys_device, - &sdp4430_leds_gpio, - &sdp4430_leds_pwm, - &sdp4430_backlight_pwm, - &sdp4430_vbat, - &sdp4430_dmic_codec, - &sdp4430_abe_audio, - &sdp4430_hdmi_audio_codec, -}; - -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_UTMI, - .mode = MUSB_OTG, - .power = 100, -}; - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .nonremovable = true, - .ocr_mask = MMC_VDD_29_30, - .no_off_init = true, - }, - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, - { - .mmc = 5, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, - .pm_caps = MMC_PM_KEEP_POWER, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .ocr_mask = MMC_VDD_165_195, - .nonremovable = true, - }, - {} /* Terminator */ -}; - -static struct regulator_consumer_supply sdp4430_vaux_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), -}; - -static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = { - .supply = "vmmc", - .dev_name = "omap_hsmmc.4", -}; - -static struct regulator_init_data sdp4430_vmmc5 = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap4_sdp4430_vmmc5_supply, -}; - -static struct fixed_voltage_config sdp4430_vwlan = { - .supply_name = "vwl1271", - .microvolts = 1800000, /* 1.8V */ - .gpio = GPIO_WIFI_PMENA, - .startup_delay = 70000, /* 70msec */ - .enable_high = 1, - .enabled_at_boot = 0, - .init_data = &sdp4430_vmmc5, -}; - -static struct platform_device omap_vwlan_device = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &sdp4430_vwlan, - }, -}; - -static struct regulator_init_data sdp4430_vaux1 = { - .constraints = { - .min_uV = 1000000, - .max_uV = 3000000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(sdp4430_vaux_supply), - .consumer_supplies = sdp4430_vaux_supply, -}; - -static struct regulator_init_data sdp4430_vusim = { - .constraints = { - .min_uV = 1200000, - .max_uV = 2900000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct twl6040_codec_data twl6040_codec = { - /* single-step ramp for headset and handsfree */ - .hs_left_step = 0x0f, - .hs_right_step = 0x0f, - .hf_left_step = 0x1d, - .hf_right_step = 0x1d, -}; - -static struct twl6040_vibra_data twl6040_vibra = { - .vibldrv_res = 8, - .vibrdrv_res = 3, - .viblmotor_res = 10, - .vibrmotor_res = 10, - .vddvibl_uV = 0, /* fixed volt supply - VBAT */ - .vddvibr_uV = 0, /* fixed volt supply - VBAT */ -}; - -static struct twl6040_platform_data twl6040_data = { - .codec = &twl6040_codec, - .vibra = &twl6040_vibra, - .audpwron_gpio = 127, -}; - -static struct i2c_board_info __initdata sdp4430_i2c_1_boardinfo[] = { - { - I2C_BOARD_INFO("twl6040", 0x4b), - .irq = 119 + OMAP44XX_IRQ_GIC_START, - .platform_data = &twl6040_data, - }, -}; - -static struct twl4030_platform_data sdp4430_twldata = { - /* Regulators */ - .vusim = &sdp4430_vusim, - .vaux1 = &sdp4430_vaux1, -}; - -static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = { - { - I2C_BOARD_INFO("tmp105", 0x48), - }, - { - I2C_BOARD_INFO("bh1780", 0x29), - }, -}; -static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = { - { - I2C_BOARD_INFO("hmc5843", 0x1e), - }, -}; -static int __init omap4_i2c_init(void) -{ - omap4_pmic_get_config(&sdp4430_twldata, TWL_COMMON_PDATA_USB, - TWL_COMMON_REGULATOR_VDAC | - TWL_COMMON_REGULATOR_VAUX2 | - TWL_COMMON_REGULATOR_VAUX3 | - TWL_COMMON_REGULATOR_VMMC | - TWL_COMMON_REGULATOR_VPP | - TWL_COMMON_REGULATOR_VANA | - TWL_COMMON_REGULATOR_VCXIO | - TWL_COMMON_REGULATOR_VUSB | - TWL_COMMON_REGULATOR_CLK32KG | - TWL_COMMON_REGULATOR_V1V8 | - TWL_COMMON_REGULATOR_V2V1); - omap4_pmic_init("twl6030", &sdp4430_twldata, sdp4430_i2c_1_boardinfo, - ARRAY_SIZE(sdp4430_i2c_1_boardinfo)); - omap_register_i2c_bus(2, 400, NULL, 0); - omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, - ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); - omap_register_i2c_bus(4, 400, sdp4430_i2c_4_boardinfo, - ARRAY_SIZE(sdp4430_i2c_4_boardinfo)); - return 0; -} - -static void __init omap_sfh7741prox_init(void) -{ - int error; - - error = gpio_request_one(OMAP4_SFH7741_ENABLE_GPIO, - GPIOF_OUT_INIT_LOW, "sfh7741"); - if (error < 0) - pr_err("%s:failed to request GPIO %d, error %d\n", - __func__, OMAP4_SFH7741_ENABLE_GPIO, error); -} - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - /* NIRQ2 for twl6040 */ - OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 | - OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), - /* GPIO_127 for twl6040 */ - OMAP4_MUX(HDQ_SIO, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT), - /* McPDM */ - OMAP4_MUX(ABE_PDM_UL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - OMAP4_MUX(ABE_PDM_DL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - OMAP4_MUX(ABE_PDM_FRAME, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), - OMAP4_MUX(ABE_PDM_LB_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - OMAP4_MUX(ABE_CLKS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - /* DMIC */ - OMAP4_MUX(ABE_DMIC_CLK1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP4_MUX(ABE_DMIC_DIN1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP4_MUX(ABE_DMIC_DIN2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP4_MUX(ABE_DMIC_DIN3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - /* McBSP1 */ - OMAP4_MUX(ABE_MCBSP1_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP4_MUX(ABE_MCBSP1_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - OMAP4_MUX(ABE_MCBSP1_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT | - OMAP_PULL_ENA), - OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - /* McBSP2 */ - OMAP4_MUX(ABE_MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP4_MUX(ABE_MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - OMAP4_MUX(ABE_MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT | - OMAP_PULL_ENA), - OMAP4_MUX(ABE_MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; - -#else -#define board_mux NULL - #endif - -static void __init omap4_sdp4430_wifi_mux_init(void) -{ - omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT | - OMAP_PIN_OFF_WAKEUPENABLE); - omap_mux_init_gpio(GPIO_WIFI_PMENA, OMAP_PIN_OUTPUT); - - omap_mux_init_signal("sdmmc5_cmd.sdmmc5_cmd", - OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc5_clk.sdmmc5_clk", - OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc5_dat0.sdmmc5_dat0", - OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc5_dat1.sdmmc5_dat1", - OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc5_dat2.sdmmc5_dat2", - OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc5_dat3.sdmmc5_dat3", - OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); - -} - -static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = { - .board_ref_clock = WL12XX_REFCLOCK_26, - .board_tcxo_clock = WL12XX_TCXOCLOCK_26, -}; - -static void __init omap4_sdp4430_wifi_init(void) -{ - int ret; - - omap4_sdp4430_wifi_mux_init(); - omap4_sdp4430_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ); - ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data); - if (ret) - pr_err("Error setting wl12xx data: %d\n", ret); - ret = platform_device_register(&omap_vwlan_device); - if (ret) - pr_err("Error registering wl12xx device: %d\n", ret); -} - -static void __init omap_4430sdp_init(void) -{ - int status; - int package = OMAP_PACKAGE_CBS; - - if (omap_rev() == OMAP4430_REV_ES1_0) - package = OMAP_PACKAGE_CBL; - omap4_mux_init(board_mux, NULL, package); - - omap4_i2c_init(); - omap_sfh7741prox_init(); - regulator_register_always_on(0, "backlight-enable", - &backlight_supply, 1, 0); - platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); - omap_serial_init(); - omap_sdrc_init(NULL, NULL); - omap4_sdp4430_wifi_init(); - omap4_twl6030_hsmmc_init(mmc); - - usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto"); - usb_musb_init(&musb_board_data); - - status = omap_ethernet_init(); - if (status) { - pr_err("Ethernet initialization failed: %d\n", status); - } else { - sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ); - spi_register_board_info(sdp4430_spi_board_info, - ARRAY_SIZE(sdp4430_spi_board_info)); - } - - pwm_add_table(sdp4430_pwm_lookup, ARRAY_SIZE(sdp4430_pwm_lookup)); - status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data); - if (status) - pr_err("Keypad initialization failed: %d\n", status); - - omap_4430sdp_display_init(); -} - -MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") - /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */ - .atag_offset = 0x100, - .smp = smp_ops(omap4_smp_ops), - .reserve = omap_reserve, - .map_io = omap4_map_io, - .init_early = omap4430_init_early, - .init_irq = gic_init_irq, - .init_machine = omap_4430sdp_init, - .init_late = omap4430_init_late, - .init_time = omap4_local_timer_init, - .restart = omap44xx_restart, -MACHINE_END

[1/6] ARM: OMAP2+: Remove board-4430sdp.c

Commit Message

Comments

Patch