| Message ID | 20140410120348.GK27282@n2100.arm.linux.org.uk (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thursday 10 April 2014 05:33 PM, Russell King - ARM Linux wrote: > On Thu, Apr 10, 2014 at 05:26:15PM +0530, Sekhar Nori wrote: >> On Wednesday 09 April 2014 09:53 PM, Russell King - ARM Linux wrote: >>> That is required because as part of the enable sequence, we write to the >>> lockdown registers to clear out anything that may be there before we >>> enable the L2 cache. If we didn't set the NS lockdown bit, then we >>> would need the secure monitor to do it for us. >> >> And I realized yesterday that the only reason L2C is working on AM437x >> is because AM437x ROM is setting these bits up for us. >> >>> Both of these bits should be managed within the L2C code rather than by >>> platforms. >> >> The current L2C code is not managing the NS_LOCKDOWN bit. I can take a >> shot at adding this support unless you are already looking at it. > > True, and I'm aware that it's missing. So... how about this on top > of my series so far. We can deal with L310_AUX_CTRL_NS_INT_CTRL when > the need to access those registers arises (if/when the edac driver > is submitted.) > > diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c > index c0f9a81a2d32..4a494cde8367 100644 > --- a/arch/arm/mach-omap2/omap4-common.c > +++ b/arch/arm/mach-omap2/omap4-common.c > @@ -213,8 +213,6 @@ static int __init omap_l2_cache_init(void) > > /* 16-way associativity, parity disabled, way size - 64KB (es2.0 +) */ > aux_ctrl = L310_AUX_CTRL_CACHE_REPLACE_RR | > - L310_AUX_CTRL_NS_LOCKDOWN | > - L310_AUX_CTRL_NS_INT_CTRL | > L2C_AUX_CTRL_SHARED_OVERRIDE | > L310_AUX_CTRL_DATA_PREFETCH | > L310_AUX_CTRL_INSTR_PREFETCH; > diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c > index 98796b789eb9..837f384c1d51 100644 > --- a/arch/arm/mm/cache-l2x0.c > +++ b/arch/arm/mm/cache-l2x0.c > @@ -776,6 +776,13 @@ static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock) > power_ctrl & L310_STNDBY_MODE_EN ? "en" : "dis"); > } > > + /* > + * Always enable non-secure access to the lockdown registers - > + * we write to them as part of the L2C enable sequence so they > + * need to be accessible. > + */ > + aux |= L310_AUX_CTRL_NS_LOCKDOWN; > + This will work. NS_LOCKDOWN is required for L2C-220 as well and so I was thinking about adding a new l2c220_enable() which will set the NS_LOCKDOWN and then call l2c_enable() Thanks, Sekhar -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index c0f9a81a2d32..4a494cde8367 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -213,8 +213,6 @@ static int __init omap_l2_cache_init(void) /* 16-way associativity, parity disabled, way size - 64KB (es2.0 +) */ aux_ctrl = L310_AUX_CTRL_CACHE_REPLACE_RR | - L310_AUX_CTRL_NS_LOCKDOWN | - L310_AUX_CTRL_NS_INT_CTRL | L2C_AUX_CTRL_SHARED_OVERRIDE | L310_AUX_CTRL_DATA_PREFETCH | L310_AUX_CTRL_INSTR_PREFETCH; diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 98796b789eb9..837f384c1d51 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -776,6 +776,13 @@ static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock) power_ctrl & L310_STNDBY_MODE_EN ? "en" : "dis"); } + /* + * Always enable non-secure access to the lockdown registers - + * we write to them as part of the L2C enable sequence so they + * need to be accessible. + */ + aux |= L310_AUX_CTRL_NS_LOCKDOWN; + l2c_enable(base, aux, num_lock); if (aux & L310_AUX_CTRL_FULL_LINE_ZERO) {