| Message ID | 20141203214641.GA1390@amd (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Em Wed, 3 Dec 2014 22:46:41 +0100 Pavel Machek <pavel@ucw.cz> escreveu: > > We are moving to device tree support on OMAP3, but that currently > breaks ADP1653 driver. This adds device tree support, plus required > documentation. > > Signed-off-by: Pavel Machek <pavel@ucw.cz> Please be sure to check your patch with checkpatch. There are several issues on it: WARNING: DT compatible string "adi,adp1653" appears un-documented -- check ./Documentation/devicetree/bindings/ #78: FILE: arch/arm/boot/dts/omap3-n900.dts:572: + compatible = "adi,adp1653"; ERROR: trailing whitespace #136: FILE: drivers/media/i2c/adp1653.c:332: +^I^I^I$ ERROR: trailing whitespace #159: FILE: drivers/media/i2c/adp1653.c:436: +static int adp1653_of_init(struct i2c_client *client, struct adp1653_flash *flash, $ WARNING: line over 80 characters #159: FILE: drivers/media/i2c/adp1653.c:436: +static int adp1653_of_init(struct i2c_client *client, struct adp1653_flash *flash, ERROR: trailing statements should be on next line #177: FILE: drivers/media/i2c/adp1653.c:454: + if (!child) return -EINVAL; WARNING: line over 80 characters #178: FILE: drivers/media/i2c/adp1653.c:455: + if (of_property_read_u32(child, "flash-timeout-microsec", &val)) return -EINVAL; ERROR: trailing statements should be on next line #178: FILE: drivers/media/i2c/adp1653.c:455: + if (of_property_read_u32(child, "flash-timeout-microsec", &val)) return -EINVAL; WARNING: line over 80 characters #180: FILE: drivers/media/i2c/adp1653.c:457: + if (of_property_read_u32(child, "flash-max-microamp", &val)) return -EINVAL; ERROR: trailing statements should be on next line #180: FILE: drivers/media/i2c/adp1653.c:457: + if (of_property_read_u32(child, "flash-max-microamp", &val)) return -EINVAL; ERROR: trailing statements should be on next line #182: FILE: drivers/media/i2c/adp1653.c:459: + if (of_property_read_u32(child, "max-microamp", &val)) return -EINVAL; ERROR: trailing statements should be on next line #186: FILE: drivers/media/i2c/adp1653.c:463: + if (!child) return -EINVAL; ERROR: trailing statements should be on next line #187: FILE: drivers/media/i2c/adp1653.c:464: + if (of_property_read_u32(child, "max-microamp", &val)) return -EINVAL; ERROR: trailing whitespace #197: FILE: drivers/media/i2c/adp1653.c:474: +^I^Idev_err(&client->dev, "Error getting GPIO\n"); $ total: 9 errors, 4 warnings, 199 lines checked NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or scripts/cleanfile > > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/adp1653.txt > @@ -0,0 +1,38 @@ > +* Analog Devices ADP1653 flash LED driver > + > +Required Properties: > + > + - compatible: Must contain one of the following > + - "adi,adp1653" > + > + - reg: I2C slave address > + > + - gpios: References to the GPIO that controls the power for the chip. > + > +There are two led outputs available - flash and indicator. One led is > +represented by one child node, nodes need to be named "flash" and "indicator". > + > +Required properties of the LED child node: > +- max-microamp : see Documentation/devicetree/bindings/leds/common.txt > + > +Required properties of the flash LED child node: > + > +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt > +- flash-timeout-microsec : see Documentation/devicetree/bindings/leds/common.txt > + > +Example: > + > + adp1653: led-controller@30 { > + compatible = "adi,adp1653"; > + reg = <0x30>; > + gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ > + > + flash { > + flash-timeout-microsec = <500000>; > + flash-max-microamp = <320000>; > + max-microamp = <50000>; > + }; > + indicator { > + max-microamp = <17500>; > + }; > + }; > diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts > index cfddc3d..11d8afd 100644 > --- a/arch/arm/boot/dts/omap3-n900.dts > +++ b/arch/arm/boot/dts/omap3-n900.dts > @@ -560,6 +567,22 @@ > > ti,usb-charger-detection = <&isp1704>; > }; > + > + adp1653: led-controller@30 { > + compatible = "adi,adp1653"; > + reg = <0x30>; > + gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ > + > + flash { > + flash-timeout-microsec = <500000>; > + flash-max-microamp = <320000>; > + max-microamp = <50000>; > + }; > + > + indicator { > + max-microamp = <17500>; > + }; > + }; > }; > > &i2c3 { > diff --git a/drivers/media/i2c/adp1653.c b/drivers/media/i2c/adp1653.c > index 873fe19..62601b2 100644 > --- a/drivers/media/i2c/adp1653.c > +++ b/drivers/media/i2c/adp1653.c > @@ -8,6 +8,7 @@ > * Contributors: > * Sakari Ailus <sakari.ailus@iki.fi> > * Tuukka Toivonen <tuukkat76@gmail.com> > + * Pavel Machek <pavel@ucw.cz> > * > * This program is free software; you can redistribute it and/or > * modify it under the terms of the GNU General Public License > @@ -34,9 +35,11 @@ > #include <linux/module.h> > #include <linux/i2c.h> > #include <linux/slab.h> > +#include <linux/of_gpio.h> > +#include <linux/gpio.h> > #include <media/adp1653.h> > #include <media/v4l2-device.h> > > #define TIMEOUT_MAX 820000 > #define TIMEOUT_STEP 54600 > #define TIMEOUT_MIN (TIMEOUT_MAX - ADP1653_REG_CONFIG_TMR_SET_MAX \ > @@ -306,9 +318,18 @@ adp1653_init_device(struct adp1653_flash *flash) > static int > __adp1653_set_power(struct adp1653_flash *flash, int on) > { > - int ret; > + int ret = 0; > > - ret = flash->platform_data->power(&flash->subdev, on); > + if (flash->platform_data->power) > + ret = flash->platform_data->power(&flash->subdev, on); > + else { > + gpio_set_value(flash->platform_data->power_gpio, on); > + if (on) { > + /* Some delay is apparently required. */ > + udelay(20); > + } > + } > + > if (ret < 0) > return ret; > > @@ -316,8 +337,13 @@ __adp1653_set_power(struct adp1653_flash *flash, int on) > return 0; > > ret = adp1653_init_device(flash); > - if (ret < 0) > + if (ret >= 0) > + return ret; > + > + if (flash->platform_data->power) > flash->platform_data->power(&flash->subdev, 0); > + else > + gpio_set_value(flash->platform_data->power_gpio, 0); > > return ret; > } > @@ -407,21 +433,69 @@ static int adp1653_resume(struct device *dev) > > #endif /* CONFIG_PM */ > > +static int adp1653_of_init(struct i2c_client *client, struct adp1653_flash *flash, > + struct device_node *node) > +{ > + u32 val; > + struct adp1653_platform_data *pd; > + enum of_gpio_flags flags; > + int gpio; > + struct device_node *child; > + > + if (!node) > + return -EINVAL; > + > + pd = devm_kzalloc(&client->dev, sizeof(*pd), GFP_KERNEL); > + if (!pd) > + return -ENOMEM; > + flash->platform_data = pd; > + > + child = of_get_child_by_name(node, "flash"); > + if (!child) return -EINVAL; One statement per line, please. Same for other lines below. > + if (of_property_read_u32(child, "flash-timeout-microsec", &val)) return -EINVAL; > + pd->max_flash_timeout = val; > + if (of_property_read_u32(child, "flash-max-microamp", &val)) return -EINVAL; > + pd->max_flash_intensity = val/1000; > + if (of_property_read_u32(child, "max-microamp", &val)) return -EINVAL; > + pd->max_torch_intensity = val/1000; > + > + child = of_get_child_by_name(node, "indicator"); > + if (!child) return -EINVAL; > + if (of_property_read_u32(child, "max-microamp", &val)) return -EINVAL; > + pd->max_indicator_intensity = val; > + > + if (!of_find_property(node, "gpios", NULL)) { > + dev_err(&client->dev, "No gpio node\n"); > + return -EINVAL; > + } > + > + gpio = of_get_gpio_flags(node, 0, &flags); > + if (gpio < 0) { > + dev_err(&client->dev, "Error getting GPIO\n"); > + return -EINVAL; > + } > + > + pd->power_gpio = gpio; > + return 0; > +} > + > + > static int adp1653_probe(struct i2c_client *client, > const struct i2c_device_id *devid) > { > struct adp1653_flash *flash; > int ret; > > - /* we couldn't work without platform data */ > - if (client->dev.platform_data == NULL) > - return -ENODEV; > - > flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL); > if (flash == NULL) > return -ENOMEM; > > flash->platform_data = client->dev.platform_data; > + if (!flash->platform_data) { > + ret = adp1653_of_init(client, flash, client->dev.of_node); > + if (ret) > + return ret; > + } > > mutex_init(&flash->power_lock); > > diff --git a/include/media/adp1653.h b/include/media/adp1653.h > index 1d9b48a..b556580 100644 > --- a/include/media/adp1653.h > +++ b/include/media/adp1653.h > @@ -100,9 +100,11 @@ struct adp1653_platform_data { > int (*power)(struct v4l2_subdev *sd, int on); > > u32 max_flash_timeout; /* flash light timeout in us */ > - u32 max_flash_intensity; /* led intensity, flash mode */ > - u32 max_torch_intensity; /* led intensity, torch mode */ > - u32 max_indicator_intensity; /* indicator led intensity */ > + u32 max_flash_intensity; /* led intensity, flash mode, mA */ > + u32 max_torch_intensity; /* led intensity, torch mode, mA */ > + u32 max_indicator_intensity; /* indicator led intensity, uA */ > + > + int power_gpio; /* for device-tree based boot */ > }; > > #define to_adp1653_flash(sd) container_of(sd, struct adp1653_flash, subdev) >
On Tue 2014-12-23 15:23:25, Mauro Carvalho Chehab wrote: > Em Wed, 3 Dec 2014 22:46:41 +0100 > Pavel Machek <pavel@ucw.cz> escreveu: > > > > > We are moving to device tree support on OMAP3, but that currently > > breaks ADP1653 driver. This adds device tree support, plus required > > documentation. > > > > Signed-off-by: Pavel Machek <pavel@ucw.cz> > > Please be sure to check your patch with checkpatch. There are several > issues on it: > WARNING: DT compatible string "adi,adp1653" appears un-documented -- check ./Documentation/devicetree/bindings/ > #78: FILE: arch/arm/boot/dts/omap3-n900.dts:572: > + compatible = "adi,adp1653"; Hmm. Take a look at part quoted below. Someone needs to fix checkpatch. Ccing authors. > ERROR: trailing whitespace > WARNING: line over 80 characters Will fix. > ERROR: trailing statements should be on next line > #177: FILE: drivers/media/i2c/adp1653.c:454: > + if (!child) return -EINVAL; I actually did these on purporse... the function is trivial, and by keeping returns on one line it fits into screen. I see you want it fixed below, so I'll do that for next version. Pavel > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/i2c/adp1653.txt > > @@ -0,0 +1,38 @@ > > +* Analog Devices ADP1653 flash LED driver > > + > > +Required Properties: > > + > > + - compatible: Must contain one of the following > > + - "adi,adp1653" > > + > > + - reg: I2C slave address > > + > > + - gpios: References to the GPIO that controls the power for the chip. > > + > > +There are two led outputs available - flash and indicator. One led is > > +represented by one child node, nodes need to be named "flash" and "indicator". > > + > > +Required properties of the LED child node: > > +- max-microamp : see Documentation/devicetree/bindings/leds/common.txt > > + > > +Required properties of the flash LED child node: > > + > > +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt > > +- flash-timeout-microsec : see Documentation/devicetree/bindings/leds/common.txt > > + > > +Example: > > + > > + adp1653: led-controller@30 { > > + compatible = "adi,adp1653"; > > + reg = <0x30>; > > + gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ > > + > > + flash { > > + flash-timeout-microsec = <500000>; > > + flash-max-microamp = <320000>; > > + max-microamp = <50000>; > > + }; > > + indicator { > > + max-microamp = <17500>; > > + }; > > + };
On Tue 2014-12-23 21:49:04, Pavel Machek wrote: > On Tue 2014-12-23 15:23:25, Mauro Carvalho Chehab wrote: > > Em Wed, 3 Dec 2014 22:46:41 +0100 > > Pavel Machek <pavel@ucw.cz> escreveu: > > > > > > > > We are moving to device tree support on OMAP3, but that currently > > > breaks ADP1653 driver. This adds device tree support, plus required > > > documentation. > > > > > > Signed-off-by: Pavel Machek <pavel@ucw.cz> > > > > Please be sure to check your patch with checkpatch. There are several > > issues on it: Ok, you should have fixed version in your inbox. Happy holidays! Pavel
--- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/adp1653.txt @@ -0,0 +1,38 @@ +* Analog Devices ADP1653 flash LED driver + +Required Properties: + + - compatible: Must contain one of the following + - "adi,adp1653" + + - reg: I2C slave address + + - gpios: References to the GPIO that controls the power for the chip. + +There are two led outputs available - flash and indicator. One led is +represented by one child node, nodes need to be named "flash" and "indicator". + +Required properties of the LED child node: +- max-microamp : see Documentation/devicetree/bindings/leds/common.txt + +Required properties of the flash LED child node: + +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt +- flash-timeout-microsec : see Documentation/devicetree/bindings/leds/common.txt + +Example: + + adp1653: led-controller@30 { + compatible = "adi,adp1653"; + reg = <0x30>; + gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ + + flash { + flash-timeout-microsec = <500000>; + flash-max-microamp = <320000>; + max-microamp = <50000>; + }; + indicator { + max-microamp = <17500>; + }; + }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index cfddc3d..11d8afd 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -560,6 +567,22 @@ ti,usb-charger-detection = <&isp1704>; }; + + adp1653: led-controller@30 { + compatible = "adi,adp1653"; + reg = <0x30>; + gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ + + flash { + flash-timeout-microsec = <500000>; + flash-max-microamp = <320000>; + max-microamp = <50000>; + }; + + indicator { + max-microamp = <17500>; + }; + }; }; &i2c3 { diff --git a/drivers/media/i2c/adp1653.c b/drivers/media/i2c/adp1653.c index 873fe19..62601b2 100644 --- a/drivers/media/i2c/adp1653.c +++ b/drivers/media/i2c/adp1653.c @@ -8,6 +8,7 @@ * Contributors: * Sakari Ailus <sakari.ailus@iki.fi> * Tuukka Toivonen <tuukkat76@gmail.com> + * Pavel Machek <pavel@ucw.cz> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -34,9 +35,11 @@ #include <linux/module.h> #include <linux/i2c.h> #include <linux/slab.h> +#include <linux/of_gpio.h> +#include <linux/gpio.h> #include <media/adp1653.h> #include <media/v4l2-device.h> #define TIMEOUT_MAX 820000 #define TIMEOUT_STEP 54600 #define TIMEOUT_MIN (TIMEOUT_MAX - ADP1653_REG_CONFIG_TMR_SET_MAX \ @@ -306,9 +318,18 @@ adp1653_init_device(struct adp1653_flash *flash) static int __adp1653_set_power(struct adp1653_flash *flash, int on) { - int ret; + int ret = 0; - ret = flash->platform_data->power(&flash->subdev, on); + if (flash->platform_data->power) + ret = flash->platform_data->power(&flash->subdev, on); + else { + gpio_set_value(flash->platform_data->power_gpio, on); + if (on) { + /* Some delay is apparently required. */ + udelay(20); + } + } + if (ret < 0) return ret; @@ -316,8 +337,13 @@ __adp1653_set_power(struct adp1653_flash *flash, int on) return 0; ret = adp1653_init_device(flash); - if (ret < 0) + if (ret >= 0) + return ret; + + if (flash->platform_data->power) flash->platform_data->power(&flash->subdev, 0); + else + gpio_set_value(flash->platform_data->power_gpio, 0); return ret; } @@ -407,21 +433,69 @@ static int adp1653_resume(struct device *dev) #endif /* CONFIG_PM */ +static int adp1653_of_init(struct i2c_client *client, struct adp1653_flash *flash, + struct device_node *node) +{ + u32 val; + struct adp1653_platform_data *pd; + enum of_gpio_flags flags; + int gpio; + struct device_node *child; + + if (!node) + return -EINVAL; + + pd = devm_kzalloc(&client->dev, sizeof(*pd), GFP_KERNEL); + if (!pd) + return -ENOMEM; + flash->platform_data = pd; + + child = of_get_child_by_name(node, "flash"); + if (!child) return -EINVAL; + if (of_property_read_u32(child, "flash-timeout-microsec", &val)) return -EINVAL; + pd->max_flash_timeout = val; + if (of_property_read_u32(child, "flash-max-microamp", &val)) return -EINVAL; + pd->max_flash_intensity = val/1000; + if (of_property_read_u32(child, "max-microamp", &val)) return -EINVAL; + pd->max_torch_intensity = val/1000; + + child = of_get_child_by_name(node, "indicator"); + if (!child) return -EINVAL; + if (of_property_read_u32(child, "max-microamp", &val)) return -EINVAL; + pd->max_indicator_intensity = val; + + if (!of_find_property(node, "gpios", NULL)) { + dev_err(&client->dev, "No gpio node\n"); + return -EINVAL; + } + + gpio = of_get_gpio_flags(node, 0, &flags); + if (gpio < 0) { + dev_err(&client->dev, "Error getting GPIO\n"); + return -EINVAL; + } + + pd->power_gpio = gpio; + return 0; +} + + static int adp1653_probe(struct i2c_client *client, const struct i2c_device_id *devid) { struct adp1653_flash *flash; int ret; - /* we couldn't work without platform data */ - if (client->dev.platform_data == NULL) - return -ENODEV; - flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL); if (flash == NULL) return -ENOMEM; flash->platform_data = client->dev.platform_data; + if (!flash->platform_data) { + ret = adp1653_of_init(client, flash, client->dev.of_node); + if (ret) + return ret; + } mutex_init(&flash->power_lock); diff --git a/include/media/adp1653.h b/include/media/adp1653.h index 1d9b48a..b556580 100644 --- a/include/media/adp1653.h +++ b/include/media/adp1653.h @@ -100,9 +100,11 @@ struct adp1653_platform_data { int (*power)(struct v4l2_subdev *sd, int on); u32 max_flash_timeout; /* flash light timeout in us */ - u32 max_flash_intensity; /* led intensity, flash mode */ - u32 max_torch_intensity; /* led intensity, torch mode */ - u32 max_indicator_intensity; /* indicator led intensity */ + u32 max_flash_intensity; /* led intensity, flash mode, mA */ + u32 max_torch_intensity; /* led intensity, torch mode, mA */ + u32 max_indicator_intensity; /* indicator led intensity, uA */ + + int power_gpio; /* for device-tree based boot */ }; #define to_adp1653_flash(sd) container_of(sd, struct adp1653_flash, subdev)
We are moving to device tree support on OMAP3, but that currently breaks ADP1653 driver. This adds device tree support, plus required documentation. Signed-off-by: Pavel Machek <pavel@ucw.cz>