| Message ID | 20160521054336.GA27123@amd (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On 21.05.2016 08:43, Pavel Machek wrote: > This adds support for AD5820 autofocus coil, found for example in > Nokia N900 smartphone. > > Signed-off-by: Pavel Machek <pavel@ucw.cz> > > --- > v2: simple cleanups, fix error paths, simplify probe > > I think it is ready. Please apply :-). > > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig > index 993dc50..77313a1 100644 > --- a/drivers/media/i2c/Kconfig > +++ b/drivers/media/i2c/Kconfig > @@ -279,6 +279,13 @@ config VIDEO_ML86V7667 > To compile this driver as a module, choose M here: the > module will be called ml86v7667. > > +config VIDEO_AD5820 > + tristate "AD5820 lens voice coil support" > + depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER > + ---help--- > + This is a driver for the AD5820 camera lens voice coil. > + It is used for example in Nokia N900 (RX-51). > + > config VIDEO_SAA7110 > tristate "Philips SAA7110 video decoder" > depends on VIDEO_V4L2 && I2C > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile > index 94f2c99..34434ae 100644 > --- a/drivers/media/i2c/Makefile > +++ b/drivers/media/i2c/Makefile > @@ -19,6 +20,7 @@ obj-$(CONFIG_VIDEO_SAA717X) += saa717x.o > obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o > obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o > obj-$(CONFIG_VIDEO_SAA6752HS) += saa6752hs.o > +obj-$(CONFIG_VIDEO_AD5820) += ad5820.o > obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o > obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o > obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o > diff --git a/drivers/media/i2c/ad5820.c b/drivers/media/i2c/ad5820.c > new file mode 100644 > index 0000000..7725829 > --- /dev/null > +++ b/drivers/media/i2c/ad5820.c > @@ -0,0 +1,416 @@ > +/* > + * drivers/media/i2c/ad5820.c > + * > + * AD5820 DAC driver for camera voice coil focus. > + * > + * Copyright (C) 2008 Nokia Corporation > + * Copyright (C) 2007 Texas Instruments > + * Copyright (C) 2016 Pavel Machek <pavel@ucw.cz> > + * > + * Contact: Tuukka Toivonen > + * Sakari Ailus > + * > + * Based on af_d88.c by Texas Instruments. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > + * 02110-1301 USA > + */ > + Remove FSF address from the above. > +#include <linux/module.h> > +#include <linux/errno.h> > +#include <linux/i2c.h> > +#include <linux/slab.h> > +#include <linux/sched.h> > +#include <linux/delay.h> > +#include <linux/bitops.h> > +#include <linux/kernel.h> > +#include <linux/regulator/consumer.h> > + > +#include <media/ad5820.h> drivers/media/i2c/ad5820.c:40:26: fatal error: media/ad5820.h: No such file or directory > +#include <media/v4l2-device.h> > + > +#define CODE_TO_RAMP_US(s) ((s) == 0 ? 0 : (1 << ((s) - 1)) * 50) > +#define RAMP_US_TO_CODE(c) fls(((c) + ((c)>>1)) / 50) > + > +/** > + * @brief I2C write using i2c_transfer(). > + * @param coil - the driver data structure > + * @param data - register value to be written > + * @returns nonnegative on success, negative if failed > + */ > +static int ad5820_write(struct ad5820_device *coil, u16 data) > +{ > + struct i2c_client *client = v4l2_get_subdevdata(&coil->subdev); > + struct i2c_msg msg; > + int r; > + > + if (!client->adapter) > + return -ENODEV; > + > + data = cpu_to_be16(data); > + msg.addr = client->addr; > + msg.flags = 0; > + msg.len = 2; > + msg.buf = (u8 *)&data; > + > + r = i2c_transfer(client->adapter, &msg, 1); > + if (r < 0) { > + dev_err(&client->dev, "write failed, error %d\n", r); > + return r; > + } > + > + return 0; > +} > + > +/* > + * Calculate status word and write it to the device based on current > + * values of V4L2 controls. It is assumed that the stored V4L2 control > + * values are properly limited and rounded. > + */ > +static int ad5820_update_hw(struct ad5820_device *coil) > +{ > + u16 status; > + > + status = RAMP_US_TO_CODE(coil->focus_ramp_time); > + status |= coil->focus_ramp_mode > + ? AD5820_RAMP_MODE_64_16 : AD5820_RAMP_MODE_LINEAR; > + status |= coil->focus_absolute << AD5820_DAC_SHIFT; > + > + if (coil->standby) > + status |= AD5820_POWER_DOWN; > + > + return ad5820_write(coil, status); > +} > + > +/* > + * Power handling > + */ > +static int ad5820_power_off(struct ad5820_device *coil, int standby) > +{ > + int ret = 0; > + > + /* > + * Go to standby first as real power off my be denied by the hardware > + * (single power line control for both coil and sensor). > + */ > + if (standby) { > + coil->standby = 1; > + ret = ad5820_update_hw(coil); > + } > + > + ret |= regulator_disable(coil->vana); > + > + return ret; > +} > + > +static int ad5820_power_on(struct ad5820_device *coil, int restore) > +{ > + int ret; > + > + printk("ad5820_power_on: 1\n"); Some remnants from testing? > + ret = regulator_enable(coil->vana); > + if (ret < 0) > + return ret; > + > + if (restore) { > + /* Restore the hardware settings. */ > + coil->standby = 0; > + ret = ad5820_update_hw(coil); > + if (ret) > + goto fail; > + } > + return 0; > + > +fail: > + coil->standby = 1; > + regulator_disable(coil->vana); > + > + return ret; > +} > + > +/* > + * V4L2 controls > + */ > +static int ad5820_set_ctrl(struct v4l2_ctrl *ctrl) > +{ > + struct ad5820_device *coil = > + container_of(ctrl->handler, struct ad5820_device, ctrls); > + u32 code; > + > + switch (ctrl->id) { > + case V4L2_CID_FOCUS_ABSOLUTE: > + coil->focus_absolute = ctrl->val; > + return ad5820_update_hw(coil); > + > + case V4L2_CID_FOCUS_AD5820_RAMP_TIME: > + code = RAMP_US_TO_CODE(ctrl->val); > + ctrl->val = CODE_TO_RAMP_US(code); > + coil->focus_ramp_time = ctrl->val; > + break; > + > + case V4L2_CID_FOCUS_AD5820_RAMP_MODE: > + coil->focus_ramp_mode = ctrl->val; > + break; > + } > + > + return 0; > +} > + > +static const struct v4l2_ctrl_ops ad5820_ctrl_ops = { > + .s_ctrl = ad5820_set_ctrl, > +}; > + > +static const char *ad5820_focus_menu[] = { static const char * const ? > + "Linear ramp", > + "64/16 ramp", > +}; > + > +static const struct v4l2_ctrl_config ad5820_ctrls[] = { > + { > + .ops = &ad5820_ctrl_ops, > + .id = V4L2_CID_FOCUS_AD5820_RAMP_TIME, > + .type = V4L2_CTRL_TYPE_INTEGER, > + .name = "Focus ramping time [us]", > + .min = 0, > + .max = 3200, > + .step = 50, > + .def = 0, > + .flags = 0, > + }, > + { > + .ops = &ad5820_ctrl_ops, > + .id = V4L2_CID_FOCUS_AD5820_RAMP_MODE, > + .type = V4L2_CTRL_TYPE_MENU, > + .name = "Focus ramping mode", > + .min = 0, > + .max = ARRAY_SIZE(ad5820_focus_menu), > + .step = 0, > + .def = 0, > + .flags = 0, > + .qmenu = ad5820_focus_menu, > + }, > +}; > + > + > +static int ad5820_init_controls(struct ad5820_device *coil) > +{ > + unsigned int i; > + > + v4l2_ctrl_handler_init(&coil->ctrls, ARRAY_SIZE(ad5820_ctrls) + 1); > + > + /* > + * V4L2_CID_FOCUS_ABSOLUTE > + * > + * Minimum current is 0 mA, maximum is 100 mA. Thus, 1 code is > + * equivalent to 100/1023 = 0.0978 mA. Nevertheless, we do not use [mA] > + * for focus position, because it is meaningless for user. Meaningful > + * would be to use focus distance or even its inverse, but since the > + * driver doesn't have sufficiently knowledge to do the conversion, we > + * will just use abstract codes here. In any case, smaller value = focus > + * position farther from camera. The default zero value means focus at > + * infinity, and also least current consumption. > + */ > + v4l2_ctrl_new_std(&coil->ctrls, &ad5820_ctrl_ops, > + V4L2_CID_FOCUS_ABSOLUTE, 0, 1023, 1, 0); > + > + /* V4L2_CID_TEST_PATTERN and V4L2_CID_MODE_* */ > + for (i = 0; i < ARRAY_SIZE(ad5820_ctrls); ++i) > + v4l2_ctrl_new_custom(&coil->ctrls, &ad5820_ctrls[i], NULL); > + > + if (coil->ctrls.error) > + return coil->ctrls.error; > + > + coil->focus_absolute = 0; > + coil->focus_ramp_time = 0; > + coil->focus_ramp_mode = 0; > + > + coil->subdev.ctrl_handler = &coil->ctrls; > + return 0; > +} please add a new line before return. > + > +/* > + * V4L2 subdev operations > + */ > +static int ad5820_registered(struct v4l2_subdev *subdev) > +{ > + struct ad5820_device *coil = to_ad5820_device(subdev); > + struct i2c_client *client = v4l2_get_subdevdata(subdev); > + > + coil->vana = regulator_get(&client->dev, "VANA"); > + if (IS_ERR(coil->vana)) { > + dev_err(&client->dev, "could not get regulator for vana\n"); > + return -ENODEV; > + } > + > + return ad5820_init_controls(coil); > +} > + > +static int > +ad5820_set_power(struct v4l2_subdev *subdev, int on) > +{ > + struct ad5820_device *coil = to_ad5820_device(subdev); > + int ret = 0; > + > + mutex_lock(&coil->power_lock); > + > + /* > + * If the power count is modified from 0 to != 0 or from != 0 to 0, > + * update the power state. > + */ > + if (coil->power_count == !on) { > + ret = on ? ad5820_power_on(coil, 1) : ad5820_power_off(coil, 1); > + if (ret < 0) > + goto done; > + } > + > + /* Update the power count. */ > + coil->power_count += on ? 1 : -1; > + WARN_ON(coil->power_count < 0); > + > +done: > + mutex_unlock(&coil->power_lock); > + return ret; > +} > + > +static int ad5820_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) > +{ > + return ad5820_set_power(sd, 1); > +} > + > +static int ad5820_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) > +{ > + return ad5820_set_power(sd, 0); > +} > + > +static const struct v4l2_subdev_core_ops ad5820_core_ops = { > + .s_power = ad5820_set_power, > +}; > + > +static const struct v4l2_subdev_ops ad5820_ops = { > + .core = &ad5820_core_ops, > +}; > + > +static const struct v4l2_subdev_internal_ops ad5820_internal_ops = { > + .registered = ad5820_registered, > + .open = ad5820_open, > + .close = ad5820_close, > +}; > + > +/* > + * I2C driver > + */ > +#ifdef CONFIG_PM > + > +static int ad5820_suspend(struct device *dev) > +{ > + struct i2c_client *client = container_of(dev, struct i2c_client, dev); > + struct v4l2_subdev *subdev = i2c_get_clientdata(client); > + struct ad5820_device *coil = to_ad5820_device(subdev); > + > + if (!coil->power_count) > + return 0; > + > + return ad5820_power_off(coil, 0); > +} > + > +static int ad5820_resume(struct device *dev) > +{ > + struct i2c_client *client = container_of(dev, struct i2c_client, dev); > + struct v4l2_subdev *subdev = i2c_get_clientdata(client); > + struct ad5820_device *coil = to_ad5820_device(subdev); > + > + if (!coil->power_count) > + return 0; > + > + return ad5820_power_on(coil, 1); > +} > + > +#else > + > +#define ad5820_suspend NULL > +#define ad5820_resume NULL > + > +#endif /* CONFIG_PM */ > + > +static int ad5820_probe(struct i2c_client *client, > + const struct i2c_device_id *devid) > +{ > + struct ad5820_device *coil; > + int ret = 0; > + > + coil = kzalloc(sizeof(*coil), GFP_KERNEL); > + if (coil == NULL) if (!coil) ? > + return -ENOMEM; > + > + mutex_init(&coil->power_lock); > + > + v4l2_i2c_subdev_init(&coil->subdev, client, &ad5820_ops); > + coil->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > + coil->subdev.internal_ops = &ad5820_internal_ops; > + strcpy(coil->subdev.name, "ad5820 focus"); > + > + ret = media_entity_pads_init(&coil->subdev.entity, 0, NULL); > + if (ret < 0) > + goto free; > + > + ret = v4l2_async_register_subdev(&coil->subdev); > + if (ret < 0) > + goto cleanup; > + > + return ret; > +cleanup: > + media_entity_cleanup(&coil->subdev.entity); > +free: > + kfree(coil); > + return ret; > +} new line before return, also I would put new lines before labels :) > + > +static int __exit ad5820_remove(struct i2c_client *client) > +{ > + struct v4l2_subdev *subdev = i2c_get_clientdata(client); > + struct ad5820_device *coil = to_ad5820_device(subdev); > + > + v4l2_device_unregister_subdev(&coil->subdev); > + v4l2_ctrl_handler_free(&coil->ctrls); > + media_entity_cleanup(&coil->subdev.entity); > + if (coil->vana) > + regulator_put(coil->vana); > + > + kfree(coil); new line here > + return 0; > +} > + > +static const struct i2c_device_id ad5820_id_table[] = { > + { AD5820_NAME, 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(i2c, ad5820_id_table); > + > +static SIMPLE_DEV_PM_OPS(ad5820_pm, ad5820_suspend, ad5820_resume); > + > +static struct i2c_driver ad5820_i2c_driver = { > + .driver = { > + .name = AD5820_NAME, > + .pm = &ad5820_pm, > + }, > + .probe = ad5820_probe, > + .remove = __exit_p(ad5820_remove), > + .id_table = ad5820_id_table, > +}; > + > +module_i2c_driver(ad5820_i2c_driver); > + > +MODULE_AUTHOR("Tuukka Toivonen"); > +MODULE_DESCRIPTION("AD5820 camera lens driver"); > +MODULE_LICENSE("GPL"); > Thanks, Ivo -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 993dc50..77313a1 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -279,6 +279,13 @@ config VIDEO_ML86V7667 To compile this driver as a module, choose M here: the module will be called ml86v7667. +config VIDEO_AD5820 + tristate "AD5820 lens voice coil support" + depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER + ---help--- + This is a driver for the AD5820 camera lens voice coil. + It is used for example in Nokia N900 (RX-51). + config VIDEO_SAA7110 tristate "Philips SAA7110 video decoder" depends on VIDEO_V4L2 && I2C diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index 94f2c99..34434ae 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -19,6 +20,7 @@ obj-$(CONFIG_VIDEO_SAA717X) += saa717x.o obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o obj-$(CONFIG_VIDEO_SAA6752HS) += saa6752hs.o +obj-$(CONFIG_VIDEO_AD5820) += ad5820.o obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o diff --git a/drivers/media/i2c/ad5820.c b/drivers/media/i2c/ad5820.c new file mode 100644 index 0000000..7725829 --- /dev/null +++ b/drivers/media/i2c/ad5820.c @@ -0,0 +1,416 @@ +/* + * drivers/media/i2c/ad5820.c + * + * AD5820 DAC driver for camera voice coil focus. + * + * Copyright (C) 2008 Nokia Corporation + * Copyright (C) 2007 Texas Instruments + * Copyright (C) 2016 Pavel Machek <pavel@ucw.cz> + * + * Contact: Tuukka Toivonen + * Sakari Ailus + * + * Based on af_d88.c by Texas Instruments. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/kernel.h> +#include <linux/regulator/consumer.h> + +#include <media/ad5820.h> +#include <media/v4l2-device.h> + +#define CODE_TO_RAMP_US(s) ((s) == 0 ? 0 : (1 << ((s) - 1)) * 50) +#define RAMP_US_TO_CODE(c) fls(((c) + ((c)>>1)) / 50) + +/** + * @brief I2C write using i2c_transfer(). + * @param coil - the driver data structure + * @param data - register value to be written + * @returns nonnegative on success, negative if failed + */ +static int ad5820_write(struct ad5820_device *coil, u16 data) +{ + struct i2c_client *client = v4l2_get_subdevdata(&coil->subdev); + struct i2c_msg msg; + int r; + + if (!client->adapter) + return -ENODEV; + + data = cpu_to_be16(data); + msg.addr = client->addr; + msg.flags = 0; + msg.len = 2; + msg.buf = (u8 *)&data; + + r = i2c_transfer(client->adapter, &msg, 1); + if (r < 0) { + dev_err(&client->dev, "write failed, error %d\n", r); + return r; + } + + return 0; +} + +/* + * Calculate status word and write it to the device based on current + * values of V4L2 controls. It is assumed that the stored V4L2 control + * values are properly limited and rounded. + */ +static int ad5820_update_hw(struct ad5820_device *coil) +{ + u16 status; + + status = RAMP_US_TO_CODE(coil->focus_ramp_time); + status |= coil->focus_ramp_mode + ? AD5820_RAMP_MODE_64_16 : AD5820_RAMP_MODE_LINEAR; + status |= coil->focus_absolute << AD5820_DAC_SHIFT; + + if (coil->standby) + status |= AD5820_POWER_DOWN; + + return ad5820_write(coil, status); +} + +/* + * Power handling + */ +static int ad5820_power_off(struct ad5820_device *coil, int standby) +{ + int ret = 0; + + /* + * Go to standby first as real power off my be denied by the hardware + * (single power line control for both coil and sensor). + */ + if (standby) { + coil->standby = 1; + ret = ad5820_update_hw(coil); + } + + ret |= regulator_disable(coil->vana); + + return ret; +} + +static int ad5820_power_on(struct ad5820_device *coil, int restore) +{ + int ret; + + printk("ad5820_power_on: 1\n"); + ret = regulator_enable(coil->vana); + if (ret < 0) + return ret; + + if (restore) { + /* Restore the hardware settings. */ + coil->standby = 0; + ret = ad5820_update_hw(coil); + if (ret) + goto fail; + } + return 0; + +fail: + coil->standby = 1; + regulator_disable(coil->vana); + + return ret; +} + +/* + * V4L2 controls + */ +static int ad5820_set_ctrl(struct v4l2_ctrl *ctrl) +{ + struct ad5820_device *coil = + container_of(ctrl->handler, struct ad5820_device, ctrls); + u32 code; + + switch (ctrl->id) { + case V4L2_CID_FOCUS_ABSOLUTE: + coil->focus_absolute = ctrl->val; + return ad5820_update_hw(coil); + + case V4L2_CID_FOCUS_AD5820_RAMP_TIME: + code = RAMP_US_TO_CODE(ctrl->val); + ctrl->val = CODE_TO_RAMP_US(code); + coil->focus_ramp_time = ctrl->val; + break; + + case V4L2_CID_FOCUS_AD5820_RAMP_MODE: + coil->focus_ramp_mode = ctrl->val; + break; + } + + return 0; +} + +static const struct v4l2_ctrl_ops ad5820_ctrl_ops = { + .s_ctrl = ad5820_set_ctrl, +}; + +static const char *ad5820_focus_menu[] = { + "Linear ramp", + "64/16 ramp", +}; + +static const struct v4l2_ctrl_config ad5820_ctrls[] = { + { + .ops = &ad5820_ctrl_ops, + .id = V4L2_CID_FOCUS_AD5820_RAMP_TIME, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Focus ramping time [us]", + .min = 0, + .max = 3200, + .step = 50, + .def = 0, + .flags = 0, + }, + { + .ops = &ad5820_ctrl_ops, + .id = V4L2_CID_FOCUS_AD5820_RAMP_MODE, + .type = V4L2_CTRL_TYPE_MENU, + .name = "Focus ramping mode", + .min = 0, + .max = ARRAY_SIZE(ad5820_focus_menu), + .step = 0, + .def = 0, + .flags = 0, + .qmenu = ad5820_focus_menu, + }, +}; + + +static int ad5820_init_controls(struct ad5820_device *coil) +{ + unsigned int i; + + v4l2_ctrl_handler_init(&coil->ctrls, ARRAY_SIZE(ad5820_ctrls) + 1); + + /* + * V4L2_CID_FOCUS_ABSOLUTE + * + * Minimum current is 0 mA, maximum is 100 mA. Thus, 1 code is + * equivalent to 100/1023 = 0.0978 mA. Nevertheless, we do not use [mA] + * for focus position, because it is meaningless for user. Meaningful + * would be to use focus distance or even its inverse, but since the + * driver doesn't have sufficiently knowledge to do the conversion, we + * will just use abstract codes here. In any case, smaller value = focus + * position farther from camera. The default zero value means focus at + * infinity, and also least current consumption. + */ + v4l2_ctrl_new_std(&coil->ctrls, &ad5820_ctrl_ops, + V4L2_CID_FOCUS_ABSOLUTE, 0, 1023, 1, 0); + + /* V4L2_CID_TEST_PATTERN and V4L2_CID_MODE_* */ + for (i = 0; i < ARRAY_SIZE(ad5820_ctrls); ++i) + v4l2_ctrl_new_custom(&coil->ctrls, &ad5820_ctrls[i], NULL); + + if (coil->ctrls.error) + return coil->ctrls.error; + + coil->focus_absolute = 0; + coil->focus_ramp_time = 0; + coil->focus_ramp_mode = 0; + + coil->subdev.ctrl_handler = &coil->ctrls; + return 0; +} + +/* + * V4L2 subdev operations + */ +static int ad5820_registered(struct v4l2_subdev *subdev) +{ + struct ad5820_device *coil = to_ad5820_device(subdev); + struct i2c_client *client = v4l2_get_subdevdata(subdev); + + coil->vana = regulator_get(&client->dev, "VANA"); + if (IS_ERR(coil->vana)) { + dev_err(&client->dev, "could not get regulator for vana\n"); + return -ENODEV; + } + + return ad5820_init_controls(coil); +} + +static int +ad5820_set_power(struct v4l2_subdev *subdev, int on) +{ + struct ad5820_device *coil = to_ad5820_device(subdev); + int ret = 0; + + mutex_lock(&coil->power_lock); + + /* + * If the power count is modified from 0 to != 0 or from != 0 to 0, + * update the power state. + */ + if (coil->power_count == !on) { + ret = on ? ad5820_power_on(coil, 1) : ad5820_power_off(coil, 1); + if (ret < 0) + goto done; + } + + /* Update the power count. */ + coil->power_count += on ? 1 : -1; + WARN_ON(coil->power_count < 0); + +done: + mutex_unlock(&coil->power_lock); + return ret; +} + +static int ad5820_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + return ad5820_set_power(sd, 1); +} + +static int ad5820_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + return ad5820_set_power(sd, 0); +} + +static const struct v4l2_subdev_core_ops ad5820_core_ops = { + .s_power = ad5820_set_power, +}; + +static const struct v4l2_subdev_ops ad5820_ops = { + .core = &ad5820_core_ops, +}; + +static const struct v4l2_subdev_internal_ops ad5820_internal_ops = { + .registered = ad5820_registered, + .open = ad5820_open, + .close = ad5820_close, +}; + +/* + * I2C driver + */ +#ifdef CONFIG_PM + +static int ad5820_suspend(struct device *dev) +{ + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct ad5820_device *coil = to_ad5820_device(subdev); + + if (!coil->power_count) + return 0; + + return ad5820_power_off(coil, 0); +} + +static int ad5820_resume(struct device *dev) +{ + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct ad5820_device *coil = to_ad5820_device(subdev); + + if (!coil->power_count) + return 0; + + return ad5820_power_on(coil, 1); +} + +#else + +#define ad5820_suspend NULL +#define ad5820_resume NULL + +#endif /* CONFIG_PM */ + +static int ad5820_probe(struct i2c_client *client, + const struct i2c_device_id *devid) +{ + struct ad5820_device *coil; + int ret = 0; + + coil = kzalloc(sizeof(*coil), GFP_KERNEL); + if (coil == NULL) + return -ENOMEM; + + mutex_init(&coil->power_lock); + + v4l2_i2c_subdev_init(&coil->subdev, client, &ad5820_ops); + coil->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + coil->subdev.internal_ops = &ad5820_internal_ops; + strcpy(coil->subdev.name, "ad5820 focus"); + + ret = media_entity_pads_init(&coil->subdev.entity, 0, NULL); + if (ret < 0) + goto free; + + ret = v4l2_async_register_subdev(&coil->subdev); + if (ret < 0) + goto cleanup; + + return ret; +cleanup: + media_entity_cleanup(&coil->subdev.entity); +free: + kfree(coil); + return ret; +} + +static int __exit ad5820_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct ad5820_device *coil = to_ad5820_device(subdev); + + v4l2_device_unregister_subdev(&coil->subdev); + v4l2_ctrl_handler_free(&coil->ctrls); + media_entity_cleanup(&coil->subdev.entity); + if (coil->vana) + regulator_put(coil->vana); + + kfree(coil); + return 0; +} + +static const struct i2c_device_id ad5820_id_table[] = { + { AD5820_NAME, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ad5820_id_table); + +static SIMPLE_DEV_PM_OPS(ad5820_pm, ad5820_suspend, ad5820_resume); + +static struct i2c_driver ad5820_i2c_driver = { + .driver = { + .name = AD5820_NAME, + .pm = &ad5820_pm, + }, + .probe = ad5820_probe, + .remove = __exit_p(ad5820_remove), + .id_table = ad5820_id_table, +}; + +module_i2c_driver(ad5820_i2c_driver); + +MODULE_AUTHOR("Tuukka Toivonen"); +MODULE_DESCRIPTION("AD5820 camera lens driver"); +MODULE_LICENSE("GPL");
This adds support for AD5820 autofocus coil, found for example in Nokia N900 smartphone. Signed-off-by: Pavel Machek <pavel@ucw.cz> --- v2: simple cleanups, fix error paths, simplify probe I think it is ready. Please apply :-).