diff mbox

[v3,03/21] ARM: dts: omap: Add generic compatible string for I2C EEPROM

Message ID 20170414010445.21727-4-javier@osg.samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Javier Martinez Canillas April 14, 2017, 1:04 a.m. UTC
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.

But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.

So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

Changes in v3: None
Changes in v2: None

 arch/arm/boot/dts/am335x-baltos.dtsi            |  2 +-
 arch/arm/boot/dts/am335x-base0033.dts           |  2 +-
 arch/arm/boot/dts/am335x-bone-common.dtsi       | 10 +++++-----
 arch/arm/boot/dts/am335x-nano.dts               |  2 +-
 arch/arm/boot/dts/am335x-pepper.dts             |  2 +-
 arch/arm/boot/dts/am335x-shc.dts                |  2 +-
 arch/arm/boot/dts/am335x-sl50.dts               |  2 +-
 arch/arm/boot/dts/am437x-idk-evm.dts            |  2 +-
 arch/arm/boot/dts/am437x-sk-evm.dts             |  2 +-
 arch/arm/boot/dts/am43x-epos-evm.dts            |  2 +-
 arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi |  2 +-
 arch/arm/boot/dts/omap3-cm-t3x.dtsi             |  2 +-
 arch/arm/boot/dts/omap3-gta04.dtsi              |  2 +-
 arch/arm/boot/dts/omap3-sb-t35.dtsi             |  2 +-
 arch/arm/boot/dts/omap4-var-som-om44.dtsi       |  2 +-
 arch/arm/boot/dts/omap5-cm-t54.dts              |  2 +-
 arch/arm/boot/dts/omap5-sbc-t54.dts             |  2 +-
 17 files changed, 21 insertions(+), 21 deletions(-)

Comments

Tony Lindgren April 14, 2017, 2:17 p.m. UTC | #1
* Javier Martinez Canillas <javier@osg.samsung.com> [170413 18:08]:
> The at24 driver allows to register I2C EEPROM chips using different vendor
> and devices, but the I2C subsystem does not take the vendor into account
> when matching using the I2C table since it only has device entries.
> 
> But when matching using an OF table, both the vendor and device has to be
> taken into account so the driver defines only a set of compatible strings
> using the "atmel" vendor as a generic fallback for compatible I2C devices.
> 
> So add this generic fallback to the device node compatible string to make
> the device to match the driver using the OF device ID table.
> 
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>

Looks good to me assuming this will get merged in a single series:

Acked-by: Tony Lindgren <tony@atomide.com>

Or if you want me to pick this patch separately, let me know.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Rob Herring (Arm) April 19, 2017, 11:56 p.m. UTC | #2
On Thu, Apr 13, 2017 at 10:04:27PM -0300, Javier Martinez Canillas wrote:
> The at24 driver allows to register I2C EEPROM chips using different vendor
> and devices, but the I2C subsystem does not take the vendor into account
> when matching using the I2C table since it only has device entries.
> 
> But when matching using an OF table, both the vendor and device has to be
> taken into account so the driver defines only a set of compatible strings
> using the "atmel" vendor as a generic fallback for compatible I2C devices.
> 
> So add this generic fallback to the device node compatible string to make
> the device to match the driver using the OF device ID table.
> 
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
> 
> Changes in v3: None
> Changes in v2: None
> 
>  arch/arm/boot/dts/am335x-baltos.dtsi            |  2 +-
>  arch/arm/boot/dts/am335x-base0033.dts           |  2 +-
>  arch/arm/boot/dts/am335x-bone-common.dtsi       | 10 +++++-----
>  arch/arm/boot/dts/am335x-nano.dts               |  2 +-
>  arch/arm/boot/dts/am335x-pepper.dts             |  2 +-
>  arch/arm/boot/dts/am335x-shc.dts                |  2 +-
>  arch/arm/boot/dts/am335x-sl50.dts               |  2 +-
>  arch/arm/boot/dts/am437x-idk-evm.dts            |  2 +-
>  arch/arm/boot/dts/am437x-sk-evm.dts             |  2 +-
>  arch/arm/boot/dts/am43x-epos-evm.dts            |  2 +-
>  arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi |  2 +-
>  arch/arm/boot/dts/omap3-cm-t3x.dtsi             |  2 +-
>  arch/arm/boot/dts/omap3-gta04.dtsi              |  2 +-
>  arch/arm/boot/dts/omap3-sb-t35.dtsi             |  2 +-
>  arch/arm/boot/dts/omap4-var-som-om44.dtsi       |  2 +-
>  arch/arm/boot/dts/omap5-cm-t54.dts              |  2 +-
>  arch/arm/boot/dts/omap5-sbc-t54.dts             |  2 +-
>  17 files changed, 21 insertions(+), 21 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
> index d42b98f15e8b..6ca780d0623f 100644
> --- a/arch/arm/boot/dts/am335x-baltos.dtsi
> +++ b/arch/arm/boot/dts/am335x-baltos.dtsi
> @@ -255,7 +255,7 @@
>  	};
>  
>  	at24@50 {
> -		compatible = "at24,24c02";
> +		compatible = "at24,24c02", "atmel,24c02";

I think you can just drop the at24 compatibles. A new kernel doesn't 
need it. An old kernel ignores the manufacturer. I checked that u-boot 
only matches on "atmel,*", so okay there. Don't know about the *BSDs. I 
couldn't find anything.

Minimally, the deprecated compatible should come last.

Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Javier Martinez Canillas May 15, 2017, 10:55 a.m. UTC | #3
Hello Rob,

On Thu, Apr 20, 2017 at 1:56 AM, Rob Herring <robh@kernel.org> wrote:
> On Thu, Apr 13, 2017 at 10:04:27PM -0300, Javier Martinez Canillas wrote:
>> The at24 driver allows to register I2C EEPROM chips using different vendor
>> and devices, but the I2C subsystem does not take the vendor into account
>> when matching using the I2C table since it only has device entries.
>>
>> But when matching using an OF table, both the vendor and device has to be
>> taken into account so the driver defines only a set of compatible strings
>> using the "atmel" vendor as a generic fallback for compatible I2C devices.
>>
>> So add this generic fallback to the device node compatible string to make
>> the device to match the driver using the OF device ID table.
>>
>> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
>> ---
>>
>> Changes in v3: None
>> Changes in v2: None
>>
>>  arch/arm/boot/dts/am335x-baltos.dtsi            |  2 +-
>>  arch/arm/boot/dts/am335x-base0033.dts           |  2 +-
>>  arch/arm/boot/dts/am335x-bone-common.dtsi       | 10 +++++-----
>>  arch/arm/boot/dts/am335x-nano.dts               |  2 +-
>>  arch/arm/boot/dts/am335x-pepper.dts             |  2 +-
>>  arch/arm/boot/dts/am335x-shc.dts                |  2 +-
>>  arch/arm/boot/dts/am335x-sl50.dts               |  2 +-
>>  arch/arm/boot/dts/am437x-idk-evm.dts            |  2 +-
>>  arch/arm/boot/dts/am437x-sk-evm.dts             |  2 +-
>>  arch/arm/boot/dts/am43x-epos-evm.dts            |  2 +-
>>  arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi |  2 +-
>>  arch/arm/boot/dts/omap3-cm-t3x.dtsi             |  2 +-
>>  arch/arm/boot/dts/omap3-gta04.dtsi              |  2 +-
>>  arch/arm/boot/dts/omap3-sb-t35.dtsi             |  2 +-
>>  arch/arm/boot/dts/omap4-var-som-om44.dtsi       |  2 +-
>>  arch/arm/boot/dts/omap5-cm-t54.dts              |  2 +-
>>  arch/arm/boot/dts/omap5-sbc-t54.dts             |  2 +-
>>  17 files changed, 21 insertions(+), 21 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
>> index d42b98f15e8b..6ca780d0623f 100644
>> --- a/arch/arm/boot/dts/am335x-baltos.dtsi
>> +++ b/arch/arm/boot/dts/am335x-baltos.dtsi
>> @@ -255,7 +255,7 @@
>>       };
>>
>>       at24@50 {
>> -             compatible = "at24,24c02";
>> +             compatible = "at24,24c02", "atmel,24c02";
>
> I think you can just drop the at24 compatibles. A new kernel doesn't
> need it. An old kernel ignores the manufacturer. I checked that u-boot
> only matches on "atmel,*", so okay there. Don't know about the *BSDs. I
> couldn't find anything.
>

That's a very good point, it doesn't make sense indeed to keep them,
since the vendor prefix can as you said be ignored (until the OF
modalias report is fixed).

I'll re-spin the series dropping them. Thanks a lot.

Best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index d42b98f15e8b..6ca780d0623f 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -255,7 +255,7 @@ 
 	};
 
 	at24@50 {
-		compatible = "at24,24c02";
+		compatible = "at24,24c02", "atmel,24c02";
 		pagesize = <8>;
 		reg = <0x50>;
 	};
diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts
index c2bee452dab8..062067251106 100644
--- a/arch/arm/boot/dts/am335x-base0033.dts
+++ b/arch/arm/boot/dts/am335x-base0033.dts
@@ -89,7 +89,7 @@ 
 
 &i2c0 {
 	eeprom: eeprom@50 {
-		compatible = "at,24c256";
+		compatible = "at,24c256", "atmel,24c256";
 		reg = <0x50>;
 	};
 };
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index bf6b26abe35b..49c8c9409ce3 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -232,7 +232,7 @@ 
 	};
 
 	baseboard_eeprom: baseboard_eeprom@50 {
-		compatible = "at,24c256";
+		compatible = "at,24c256", "atmel,24c256";
 		reg = <0x50>;
 
 		#address-cells = <1>;
@@ -251,7 +251,7 @@ 
 	clock-frequency = <100000>;
 
 	cape_eeprom0: cape_eeprom0@54 {
-		compatible = "at,24c256";
+		compatible = "at,24c256", "atmel,24c256";
 		reg = <0x54>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -261,7 +261,7 @@ 
 	};
 
 	cape_eeprom1: cape_eeprom1@55 {
-		compatible = "at,24c256";
+		compatible = "at,24c256", "atmel,24c256";
 		reg = <0x55>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -271,7 +271,7 @@ 
 	};
 
 	cape_eeprom2: cape_eeprom2@56 {
-		compatible = "at,24c256";
+		compatible = "at,24c256", "atmel,24c256";
 		reg = <0x56>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -281,7 +281,7 @@ 
 	};
 
 	cape_eeprom3: cape_eeprom3@57 {
-		compatible = "at,24c256";
+		compatible = "at,24c256", "atmel,24c256";
 		reg = <0x57>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index 807494bc722b..946d7069f417 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -224,7 +224,7 @@ 
 	};
 
 	eeprom@53 {
-		compatible = "microchip,24c02";
+		compatible = "microchip,24c02", "atmel,24c02";
 		reg = <0x53>;
 		pagesize = <8>;
 	};
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 30e2f8770aaf..368cef158a19 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -67,7 +67,7 @@ 
 	};
 
 	eeprom: eeprom@50 {
-		compatible = "at,24c256";
+		compatible = "at,24c256", "atmel,24c256";
 		reg = <0x50>;
 	};
 
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
index bf8727a19ece..6a14b8478af0 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -188,7 +188,7 @@ 
 	};
 
 	at24@50 {
-		compatible = "at24,24c32";
+		compatible = "at24,24c32", "atmel,24c32";
 		pagesize = <32>;
 		reg = <0x50>;
 	};
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
index c5d2589c55fc..d03678de140c 100644
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -309,7 +309,7 @@ 
 	};
 
 	eeprom: eeprom@50 {
-		compatible = "at,24c256";
+		compatible = "at,24c256", "atmel,24c256";
 		reg = <0x50>;
 	};
 
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index c1f7f9336e64..6c831663a75f 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -339,7 +339,7 @@ 
 	clock-frequency = <400000>;
 
 	at24@50 {
-		compatible = "at24,24c256";
+		compatible = "at24,24c256", "atmel,24c256";
 		pagesize = <64>;
 		reg = <0x50>;
 	};
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 4dc54bee2f36..1531b295336e 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -511,7 +511,7 @@ 
 	};
 
 	at24@50 {
-		compatible = "at24,24c256";
+		compatible = "at24,24c256", "atmel,24c256";
 		pagesize = <64>;
 		reg = <0x50>;
 	};
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 9acd4ccdec4e..ca9b11375298 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -477,7 +477,7 @@ 
 	};
 
 	at24@50 {
-		compatible = "at24,24c256";
+		compatible = "at24,24c256", "atmel,24c256";
 		pagesize = <64>;
 		reg = <0x50>;
 	};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index 585d792a8fdd..6af022540300 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -388,7 +388,7 @@ 
 	};
 
 	eeprom: eeprom@50 {
-		compatible = "at,24c32";
+		compatible = "at,24c32", "atmel,24c32";
 		reg = <0x50>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index 57b9a028a49a..d960f1b3b4b1 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -188,7 +188,7 @@ 
 	clock-frequency = <400000>;
 
 	at24@50 {
-		compatible = "at24,24c02";
+		compatible = "at24,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
 	};
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index b3a8b1f24499..430ab832783b 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -418,7 +418,7 @@ 
 
 	/* RFID EEPROM */
 	m24lr64@50 {
-		compatible = "at,24c64";
+		compatible = "at,24c64", "atmel,24c64";
 		reg = <0x50>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi
index 73643fabde5d..e54091fbd40b 100644
--- a/arch/arm/boot/dts/omap3-sb-t35.dtsi
+++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi
@@ -90,7 +90,7 @@ 
 	clock-frequency = <400000>;
 
 	at24@50 {
-		compatible = "at24,24c02";
+		compatible = "at24,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
 	};
diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
index 758b6eb7ae43..6500bfc8d130 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
@@ -241,7 +241,7 @@ 
 	};
 
 	eeprom@50 {
-		compatible = "microchip,24c32";
+		compatible = "microchip,24c32", "atmel,24c32";
 		reg = <0x50>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index b153f604932a..e0e31bfbf0e0 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -404,7 +404,7 @@ 
 	clock-frequency = <400000>;
 
 	at24@50 {
-		compatible = "at24,24c02";
+		compatible = "at24,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
 	};
diff --git a/arch/arm/boot/dts/omap5-sbc-t54.dts b/arch/arm/boot/dts/omap5-sbc-t54.dts
index 337bbbc01a35..efc70f80abae 100644
--- a/arch/arm/boot/dts/omap5-sbc-t54.dts
+++ b/arch/arm/boot/dts/omap5-sbc-t54.dts
@@ -44,7 +44,7 @@ 
 	clock-frequency = <400000>;
 
 	at24@50 {
-		compatible = "at24,24c02";
+		compatible = "at24,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
 	};