From patchwork Tue May 2 16:27:25 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sebastian Reichel X-Patchwork-Id: 9708297 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id C0D8A6021C for ; Tue, 2 May 2017 16:28:18 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id B32772846C for ; Tue, 2 May 2017 16:28:18 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id A6658284D5; Tue, 2 May 2017 16:28:18 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.9 required=2.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id DF4F52846C for ; Tue, 2 May 2017 16:28:17 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751128AbdEBQ2A (ORCPT ); Tue, 2 May 2017 12:28:00 -0400 Received: from bhuna.collabora.co.uk ([46.235.227.227]:60641 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751206AbdEBQ1k (ORCPT ); Tue, 2 May 2017 12:27:40 -0400 Received: from [127.0.0.1] (localhost [127.0.0.1]) (Authenticated sender: sre) with ESMTPSA id 3C2B62657BD From: Sebastian Reichel To: Sebastian Reichel , Dmitry Torokhov , Tony Lindgren Cc: Rob Herring , linux-input@vger.kernel.org, linux-omap@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sebastian Reichel Subject: [PATCH 1/2] Input: pwm-vibra: new driver Date: Tue, 2 May 2017 18:27:25 +0200 Message-Id: <20170502162726.11577-2-sebastian.reichel@collabora.co.uk> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20170502162726.11577-1-sebastian.reichel@collabora.co.uk> References: <20170502162726.11577-1-sebastian.reichel@collabora.co.uk> Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Provide a simple driver for PWM controllable vibrators. It will be used by Motorola Droid 4. Signed-off-by: Sebastian Reichel --- .../devicetree/bindings/input/pwm-vibrator.txt | 60 ++++ drivers/input/misc/Kconfig | 11 + drivers/input/misc/Makefile | 1 + drivers/input/misc/pwm-vibra.c | 348 +++++++++++++++++++++ 4 files changed, 420 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/pwm-vibrator.txt create mode 100644 drivers/input/misc/pwm-vibra.c diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.txt b/Documentation/devicetree/bindings/input/pwm-vibrator.txt new file mode 100644 index 000000000000..c35be4691366 --- /dev/null +++ b/Documentation/devicetree/bindings/input/pwm-vibrator.txt @@ -0,0 +1,60 @@ +* PWM vibrator device tree bindings + +Registers a PWM device as vibrator. + +Required properties: +- compatible: should be + * "pwm-vibrator" + For vibrators controlled using the PWM channel's duty cycle (higher duty means + the vibrator becomes stronger). + * "motorola,mapphone-pwm-vibrator" + For vibrator found in Motorola Droid 4. This vibrator generates a pulse for + every rising edge, so its controlled using a duty cycle of 50% and changing + the period time. +- pwm-names: Should contain "enable" and optionally "direction" +- pwms: Should contain a PWM handle for each entry in pwm-names + +Example from Motorola Droid 4: + +&omap4_pmx_core { + vibrator_direction_pin: pinmux_vibrator_direction_pin { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ + >; + }; + + vibrator_enable_pin: pinmux_vibrator_enable_pin { + pinctrl-single,pins = < + OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ + >; + }; +}; + +/ { + pwm8: dmtimer-pwm { + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_direction_pin>; + + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer8>; + ti,clock-source = <0x01>; + }; + + pwm9: dmtimer-pwm { + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_enable_pin>; + + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer9>; + ti,clock-source = <0x01>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm8 0 1000000000 0>, + <&pwm9 0 1000000000 0>; + pwm-names = "enable", "direction"; + }; +}; diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 5b6c52210d20..d8e0b25eb217 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -571,6 +571,17 @@ config INPUT_PWM_BEEPER To compile this driver as a module, choose M here: the module will be called pwm-beeper. +config INPUT_PWM_VIBRA + tristate "PWM vibrator support" + depends on PWM + help + Say Y here to get support for PWM based vibrator devices. + + If unsure, say N. + + To compile this driver as a module, choose M here: the module will be + called pwm-vibra. + config INPUT_GPIO_ROTARY_ENCODER tristate "Rotary encoders connected to GPIO pins" depends on GPIOLIB || COMPILE_TEST diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index b10523f2878e..9a6517f5458c 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -58,6 +58,7 @@ obj-$(CONFIG_INPUT_PM8XXX_VIBRATOR) += pm8xxx-vibrator.o obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o obj-$(CONFIG_INPUT_POWERMATE) += powermate.o obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o +obj-$(CONFIG_INPUT_PWM_VIBRA) += pwm-vibra.o obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o obj-$(CONFIG_INPUT_REGULATOR_HAPTIC) += regulator-haptic.o obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c new file mode 100644 index 000000000000..a7d36d88679a --- /dev/null +++ b/drivers/input/misc/pwm-vibra.c @@ -0,0 +1,348 @@ +/* + * PWM vibrator driver + * + * Copyright (C) 2017 Collabora Ltd. + * + * Based on previous work from: + * Copyright (C) 2012 Dmitry Torokhov + * + * Based on PWM beeper driver: + * Copyright (C) 2010, Lars-Peter Clausen + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#define DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include + +/** + * Motorola Droid 4 (also known as mapphone), has a vibrator, which pulses + * 1x on rising edge. Increasing the pwm period results in more pulses per + * second, but reduces intensity. There is also a second channel to control + * the vibrator's rotation direction to increase effect. The following + * numbers were determined manually. Going below 12.5 Hz means, clearly + * noticeable pauses and at 30 Hz the vibration is just barely noticable + * anymore. + */ +#define MAPPHONE_MIN_FREQ 125 /* 12.5 Hz */ +#define MAPPHONE_MAX_FREQ 300 /* 30.0 Hz */ + +struct pwm_vibrator_hw { + void (*setup_pwm)(u16 level, struct pwm_state *); + void (*setup_pwm_dir)(u16 level, struct pwm_state *); +}; + +struct pwm_vibrator { + struct input_dev *input; + struct pwm_device *pwm; + struct pwm_device *pwm_dir; + struct regulator *vcc; + + struct work_struct play_work; + u16 level; + + const struct pwm_vibrator_hw *hw; +}; + +static void pwm_vibrator_setup_generic(u16 level, struct pwm_state *state) +{ + /* period is configured by platform, duty cycle controls strength */ + pwm_set_relative_duty_cycle(state, level, 0xffff); +} + +static void pwm_vibrator_setup_dir_generic(u16 level, struct pwm_state *state) +{ + /* period is configured by platform, duty cycle controls strength */ + pwm_set_relative_duty_cycle(state, 50, 100); +} + +static struct pwm_vibrator_hw pwm_vib_hw_generic = { + .setup_pwm = pwm_vibrator_setup_generic, + .setup_pwm_dir = pwm_vibrator_setup_dir_generic, +}; + +static void pwm_vibrator_setup_mapphone(u16 level, struct pwm_state *state) +{ + unsigned int freq; + + /* convert [0, 0xffff] -> [MAPPHONE_MAX_FREQ, MAPPHONE_MIN_FREQ] */ + freq = 0xffff - level; + freq *= MAPPHONE_MAX_FREQ - MAPPHONE_MIN_FREQ; + freq /= 0xffff; + freq += MAPPHONE_MIN_FREQ; + + state->period = DIV_ROUND_CLOSEST_ULL((u64) NSEC_PER_SEC * 10, freq); + pwm_set_relative_duty_cycle(state, 50, 100); +} + +static struct pwm_vibrator_hw pwm_vib_hw_mapphone = { + .setup_pwm = pwm_vibrator_setup_mapphone, + .setup_pwm_dir = pwm_vibrator_setup_mapphone, +}; + +static int pwm_vibrator_start(struct pwm_vibrator *vibrator) +{ + struct device *pdev = vibrator->input->dev.parent; + struct pwm_state state; + int err; + + dev_dbg(pdev, "start vibrator with level=0x%04x", vibrator->level); + + err = regulator_enable(vibrator->vcc); + if (err) { + dev_err(pdev, "failed to enable regulator: %d", err); + return err; + } + + pwm_get_state(vibrator->pwm, &state); + state.enabled = true; + + vibrator->hw->setup_pwm(vibrator->level, &state); + dev_dbg(pdev, "period=%u", state.period); + + err = pwm_apply_state(vibrator->pwm, &state); + if (err) { + dev_err(pdev, "failed to apply pwm state: %d", err); + return err; + } + + if (vibrator->pwm_dir) { + pwm_get_state(vibrator->pwm_dir, &state); + state.enabled = true; + + /* always control via period */ + vibrator->hw->setup_pwm_dir(vibrator->level, &state); + + err = pwm_apply_state(vibrator->pwm_dir, &state); + if (err) { + dev_err(pdev, "failed to apply dir-pwm state: %d", err); + pwm_disable(vibrator->pwm); + return err; + } + } + + return 0; +} + +static void pwm_vibrator_stop(struct pwm_vibrator *vibrator) +{ + struct device *pdev = vibrator->input->dev.parent; + + dev_dbg(pdev, "stop vibrator"); + + regulator_disable(vibrator->vcc); + + if (vibrator->pwm_dir) + pwm_disable(vibrator->pwm_dir); + pwm_disable(vibrator->pwm); +} + +static void vibra_play_work(struct work_struct *work) +{ + struct pwm_vibrator *vibrator = container_of(work, + struct pwm_vibrator, play_work); + + if (vibrator->level) + pwm_vibrator_start(vibrator); + else + pwm_vibrator_stop(vibrator); +} + +static int pwm_vibrator_play_effect(struct input_dev *dev, void *data, + struct ff_effect *effect) +{ + struct pwm_vibrator *vibrator = input_get_drvdata(dev); + + vibrator->level = effect->u.rumble.strong_magnitude; + if (!vibrator->level) + vibrator->level = effect->u.rumble.weak_magnitude; + + schedule_work(&vibrator->play_work); + + return 0; +} + +static int pwm_vibrator_probe(struct platform_device *pdev) +{ + struct pwm_vibrator *vibrator; + struct input_dev *input; + struct pwm_state state; + int err; + + vibrator = devm_kzalloc(&pdev->dev, sizeof(*vibrator), GFP_KERNEL); + if (!vibrator) + return -ENOMEM; + + input = devm_input_allocate_device(&pdev->dev); + if (!vibrator || !input) + return -ENOMEM; + + vibrator->input = input; + + vibrator->vcc = devm_regulator_get(&pdev->dev, "vcc"); + err = PTR_ERR_OR_ZERO(vibrator->vcc); + if (err) { + if (err != -EPROBE_DEFER) + dev_err(&pdev->dev, "Failed to request regulator: %d", + err); + return err; + } + + vibrator->pwm = devm_pwm_get(&pdev->dev, "enable"); + err = PTR_ERR_OR_ZERO(vibrator->pwm); + if (err) { + if (err != -EPROBE_DEFER) + dev_err(&pdev->dev, "Failed to request main pwm: %d", + err); + return err; + } + + INIT_WORK(&vibrator->play_work, vibra_play_work); + + /* Sync up PWM state and ensure it is off. */ + pwm_init_state(vibrator->pwm, &state); + state.enabled = false; + err = pwm_apply_state(vibrator->pwm, &state); + if (err) { + dev_err(&pdev->dev, "failed to apply initial PWM state: %d", + err); + return err; + } + + vibrator->pwm_dir = devm_pwm_get(&pdev->dev, "direction"); + err = PTR_ERR_OR_ZERO(vibrator->pwm_dir); + if (err == -ENODATA) { + vibrator->pwm_dir = NULL; + } else if (err == -EPROBE_DEFER) { + return err; + } else if (err) { + dev_err(&pdev->dev, "Failed to request direction pwm: %d", err); + return err; + } else { + /* Sync up PWM state and ensure it is off. */ + pwm_init_state(vibrator->pwm_dir, &state); + state.enabled = false; + err = pwm_apply_state(vibrator->pwm_dir, &state); + if (err) { + dev_err(&pdev->dev, "failed to apply initial PWM state: %d", + err); + return err; + } + } + + vibrator->hw = of_device_get_match_data(&pdev->dev); + if (!vibrator->hw) + vibrator->hw = &pwm_vib_hw_generic; + + input->name = "pwm-vibrator"; + input->id.bustype = BUS_HOST; + input->dev.parent = &pdev->dev; + + input_set_drvdata(input, vibrator); + input_set_capability(input, EV_FF, FF_RUMBLE); + + err = input_ff_create_memless(input, NULL, pwm_vibrator_play_effect); + if (err) { + dev_err(&pdev->dev, "Couldn't create FF dev: %d", err); + return err; + } + + err = input_register_device(input); + if (err) { + dev_err(&pdev->dev, "Couldn't register input dev: %d", err); + return err; + } + + platform_set_drvdata(pdev, vibrator); + + dev_info(&pdev->dev, "pwm-vibrator probed."); + + return 0; +} + +static int pwm_vibrator_remove(struct platform_device *pdev) +{ + struct pwm_vibrator *vibrator = platform_get_drvdata(pdev); + + cancel_work_sync(&vibrator->play_work); + pwm_vibrator_stop(vibrator); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int pwm_vibrator_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pwm_vibrator *vibrator = platform_get_drvdata(pdev); + struct input_dev *input = vibrator->input; + unsigned long flags; + + spin_lock_irqsave(&input->event_lock, flags); + if (vibrator->level) + pwm_vibrator_stop(vibrator); + spin_unlock_irqrestore(&input->event_lock, flags); + + return 0; +} + +static int pwm_vibrator_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pwm_vibrator *vibrator = platform_get_drvdata(pdev); + struct input_dev *input = vibrator->input; + unsigned long flags; + + spin_lock_irqsave(&input->event_lock, flags); + if (vibrator->level) + pwm_vibrator_start(vibrator); + spin_unlock_irqrestore(&input->event_lock, flags); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pwm_vibrator_pm_ops, + pwm_vibrator_suspend, pwm_vibrator_resume); + +#ifdef CONFIG_OF + +#define PWM_VIB_COMPAT(of_compatible, cfg) { \ + .compatible = of_compatible, \ + .data = &cfg, \ +} + +static const struct of_device_id pwm_vibra_dt_match_table[] = { + PWM_VIB_COMPAT("pwm-vibrator", pwm_vib_hw_generic), + PWM_VIB_COMPAT("motorola,mapphone-pwm-vibrator", pwm_vib_hw_mapphone), + {}, +}; +MODULE_DEVICE_TABLE(of, pwm_vibra_dt_match_table); +#endif + +static struct platform_driver pwm_vibrator_driver = { + .probe = pwm_vibrator_probe, + .remove = pwm_vibrator_remove, + .driver = { + .name = "pwm-vibrator", + .pm = &pwm_vibrator_pm_ops, + .of_match_table = of_match_ptr(pwm_vibra_dt_match_table), + }, +}; +module_platform_driver(pwm_vibrator_driver); + +MODULE_AUTHOR("Sebastian Reichel "); +MODULE_DESCRIPTION("PWM vibrator driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pwm-vibrator");