| Message ID | 20170609084141.15582-1-kishon@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 9 June 2017 at 10:41, Kishon Vijay Abraham I <kishon@ti.com> wrote: > commit 94647a30124e2c7 ("ARM: dts: omap3-overo: Enable WiFi/BT combo") > while enabling WiFi/BT combo added regulator to trigger the nReset > signal of the Bluetooth module in vqmmc-supply. However BT should be > handled by UART. Moreover "vqmmc" is not a defined binding for > omap_hsmmc. While "vqmmc" in mmc2 hasn't caused any issues so far, > mmc2 will start to mis-behave once omap_hsmmc defines "vqmmc" > binding. > > Remove "vqmmc-supply" property in mmc2 here. > > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Okay, so I assume I also need to carry this in my immutable branch for the omap driver changes. More precisely before the driver changes? Wait for Tony to ack this then. Kind regards Uffe > --- > arch/arm/boot/dts/omap3-overo-base.dtsi | 11 ----------- > 1 file changed, 11 deletions(-) > > diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi > index 401fae838fe9..cd220342a805 100644 > --- a/arch/arm/boot/dts/omap3-overo-base.dtsi > +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi > @@ -74,16 +74,6 @@ > gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* gpio_16: WiFi nReset */ > startup-delay-us = <10000>; > }; > - > - /* Regulator to trigger the nReset signal of the Bluetooth module */ > - w3cbw003c_bt_nreset: regulator-w3cbw003c-bt-nreset { > - compatible = "regulator-fixed"; > - regulator-name = "regulator-w3cbw003c-bt-nreset"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio_164: BT nReset */ > - startup-delay-us = <10000>; > - }; > }; > > &omap3_pmx_core { > @@ -191,7 +181,6 @@ > pinctrl-names = "default"; > pinctrl-0 = <&mmc2_pins>; > vmmc-supply = <&w3cbw003c_npoweron>; > - vqmmc-supply = <&w3cbw003c_bt_nreset>; > vmmc_aux-supply = <&w3cbw003c_wifi_nreset>; > bus-width = <4>; > cap-sdio-irq; > -- > 2.11.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Friday 09 June 2017 04:07 PM, Ulf Hansson wrote: > On 9 June 2017 at 10:41, Kishon Vijay Abraham I <kishon@ti.com> wrote: >> commit 94647a30124e2c7 ("ARM: dts: omap3-overo: Enable WiFi/BT combo") >> while enabling WiFi/BT combo added regulator to trigger the nReset >> signal of the Bluetooth module in vqmmc-supply. However BT should be >> handled by UART. Moreover "vqmmc" is not a defined binding for >> omap_hsmmc. While "vqmmc" in mmc2 hasn't caused any issues so far, >> mmc2 will start to mis-behave once omap_hsmmc defines "vqmmc" >> binding. >> >> Remove "vqmmc-supply" property in mmc2 here. >> >> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> > > Okay, so I assume I also need to carry this in my immutable branch for > the omap driver changes. More precisely before the driver changes? yeah, that's right! Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Kishon Vijay Abraham I <kishon@ti.com> [170609 04:05]: > Hi, > > On Friday 09 June 2017 04:07 PM, Ulf Hansson wrote: > > On 9 June 2017 at 10:41, Kishon Vijay Abraham I <kishon@ti.com> wrote: > >> commit 94647a30124e2c7 ("ARM: dts: omap3-overo: Enable WiFi/BT combo") > >> while enabling WiFi/BT combo added regulator to trigger the nReset > >> signal of the Bluetooth module in vqmmc-supply. However BT should be > >> handled by UART. Moreover "vqmmc" is not a defined binding for > >> omap_hsmmc. While "vqmmc" in mmc2 hasn't caused any issues so far, > >> mmc2 will start to mis-behave once omap_hsmmc defines "vqmmc" > >> binding. > >> > >> Remove "vqmmc-supply" property in mmc2 here. > >> > >> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> > > > > Okay, so I assume I also need to carry this in my immutable branch for > > the omap driver changes. More precisely before the driver changes? > > yeah, that's right! As far as I can tell this regulator won't do anything right now so: Acked-by: Tony Lindgren <tony@atomide.com> -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 9 June 2017 at 10:41, Kishon Vijay Abraham I <kishon@ti.com> wrote: > commit 94647a30124e2c7 ("ARM: dts: omap3-overo: Enable WiFi/BT combo") > while enabling WiFi/BT combo added regulator to trigger the nReset > signal of the Bluetooth module in vqmmc-supply. However BT should be > handled by UART. Moreover "vqmmc" is not a defined binding for > omap_hsmmc. While "vqmmc" in mmc2 hasn't caused any issues so far, > mmc2 will start to mis-behave once omap_hsmmc defines "vqmmc" > binding. > > Remove "vqmmc-supply" property in mmc2 here. > > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Thanks, applied for next! Kind regards Uffe > --- > arch/arm/boot/dts/omap3-overo-base.dtsi | 11 ----------- > 1 file changed, 11 deletions(-) > > diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi > index 401fae838fe9..cd220342a805 100644 > --- a/arch/arm/boot/dts/omap3-overo-base.dtsi > +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi > @@ -74,16 +74,6 @@ > gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* gpio_16: WiFi nReset */ > startup-delay-us = <10000>; > }; > - > - /* Regulator to trigger the nReset signal of the Bluetooth module */ > - w3cbw003c_bt_nreset: regulator-w3cbw003c-bt-nreset { > - compatible = "regulator-fixed"; > - regulator-name = "regulator-w3cbw003c-bt-nreset"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio_164: BT nReset */ > - startup-delay-us = <10000>; > - }; > }; > > &omap3_pmx_core { > @@ -191,7 +181,6 @@ > pinctrl-names = "default"; > pinctrl-0 = <&mmc2_pins>; > vmmc-supply = <&w3cbw003c_npoweron>; > - vqmmc-supply = <&w3cbw003c_bt_nreset>; > vmmc_aux-supply = <&w3cbw003c_wifi_nreset>; > bus-width = <4>; > cap-sdio-irq; > -- > 2.11.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index 401fae838fe9..cd220342a805 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -74,16 +74,6 @@ gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* gpio_16: WiFi nReset */ startup-delay-us = <10000>; }; - - /* Regulator to trigger the nReset signal of the Bluetooth module */ - w3cbw003c_bt_nreset: regulator-w3cbw003c-bt-nreset { - compatible = "regulator-fixed"; - regulator-name = "regulator-w3cbw003c-bt-nreset"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio_164: BT nReset */ - startup-delay-us = <10000>; - }; }; &omap3_pmx_core { @@ -191,7 +181,6 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; vmmc-supply = <&w3cbw003c_npoweron>; - vqmmc-supply = <&w3cbw003c_bt_nreset>; vmmc_aux-supply = <&w3cbw003c_wifi_nreset>; bus-width = <4>; cap-sdio-irq;
commit 94647a30124e2c7 ("ARM: dts: omap3-overo: Enable WiFi/BT combo") while enabling WiFi/BT combo added regulator to trigger the nReset signal of the Bluetooth module in vqmmc-supply. However BT should be handled by UART. Moreover "vqmmc" is not a defined binding for omap_hsmmc. While "vqmmc" in mmc2 hasn't caused any issues so far, mmc2 will start to mis-behave once omap_hsmmc defines "vqmmc" binding. Remove "vqmmc-supply" property in mmc2 here. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- arch/arm/boot/dts/omap3-overo-base.dtsi | 11 ----------- 1 file changed, 11 deletions(-)