| Message ID | 20170609223223.19079-1-sre@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Sebastian Reichel <sre@kernel.org> [170609 15:36]: > Motorola Droid 4 has an OMAP4, but no TWL6030. It currently > complains verbosely about this during boot: > > twl: not initialized > twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 > twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 > twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 > twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 > twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 > twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 > twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 > omap2_set_init_voltage: unable to find boot up OPP for vdd_core > omap2_set_init_voltage: unable to set vdd_core > omap2_set_init_voltage: unable to find boot up OPP for vdd_iva > omap2_set_init_voltage: unable to set vdd_iva > > While proper support for CPCAP should be added at some point, > let's exit early in omap2_common_pm_late_init() until that > has been implemented to avoid the above errors. There is still > a reminder about missing PM in dmesg: > > Missing OMAP4 PM for this platform! Great good to see this dmesg spam go away. Applying into omap-for-v4.13/soc-v3 thanks. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Tony Lindgren <tony@atomide.com> [170612 00:43]: > * Sebastian Reichel <sre@kernel.org> [170609 15:36]: > > Motorola Droid 4 has an OMAP4, but no TWL6030. It currently > > complains verbosely about this during boot: > > > > twl: not initialized > > twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 > > twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 > > twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 > > twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 > > twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 > > twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 > > twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 > > omap2_set_init_voltage: unable to find boot up OPP for vdd_core > > omap2_set_init_voltage: unable to set vdd_core > > omap2_set_init_voltage: unable to find boot up OPP for vdd_iva > > omap2_set_init_voltage: unable to set vdd_iva > > > > While proper support for CPCAP should be added at some point, > > let's exit early in omap2_common_pm_late_init() until that > > has been implemented to avoid the above errors. There is still > > a reminder about missing PM in dmesg: > > > > Missing OMAP4 PM for this platform! > > Great good to see this dmesg spam go away. Applying into > omap-for-v4.13/soc-v3 thanks. After running make randconfig builds over lunch I noticed we can now get "undefined reference to `twl_rev'" so we need something more here if CONFIG_TWL4030_CORE or CONFIG_TWL6040_CORE is not selected or is a loadable module. Maybe making the whole function depend on the following might work: #if IS_BUILTIN(CONFIG_TWL6040_CORE) || \ IS_BUILTIN(CONFIG_TWL4030_CORE) ... #endif Anyways dropping for now. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 63027e60cc20..4e4313cecc26 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -240,6 +240,9 @@ omap_postcore_initcall(omap2_common_pm_init); int __init omap2_common_pm_late_init(void) { + if (!twl_rev()) + return -ENODEV; + /* Init the voltage layer */ omap3_twl_init(); omap4_twl_init();
Motorola Droid 4 has an OMAP4, but no TWL6030. It currently complains verbosely about this during boot: twl: not initialized twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 omap2_set_init_voltage: unable to find boot up OPP for vdd_core omap2_set_init_voltage: unable to set vdd_core omap2_set_init_voltage: unable to find boot up OPP for vdd_iva omap2_set_init_voltage: unable to set vdd_iva While proper support for CPCAP should be added at some point, let's exit early in omap2_common_pm_late_init() until that has been implemented to avoid the above errors. There is still a reminder about missing PM in dmesg: Missing OMAP4 PM for this platform! Signed-off-by: Sebastian Reichel <sre@kernel.org> --- arch/arm/mach-omap2/pm.c | 3 +++ 1 file changed, 3 insertions(+)