diff mbox

[v4.14] Add support for bq27521 battery monitor

Message ID 20171110103937.GA29900@amd (mailing list archive)
State New, archived
Headers show

Commit Message

Pavel Machek Nov. 10, 2017, 10:39 a.m. UTC 
This adds basic support for BQ27521 battery monitor, used in Nokia N9
and N950. In particular, battery voltage is important to be able to
tell when the battery is almost empty. Emptying battery on N950 is
pretty painful, as flasher needs to be used to recover phone in such case.

Signed-off-by: Pavel Machek <pavel@ucw.cz>

Comments

Pavel Machek Dec. 1, 2017, 11:06 p.m. UTC | #1 
Hi!

> This adds basic support for BQ27521 battery monitor, used in Nokia N9
> and N950. In particular, battery voltage is important to be able to
> tell when the battery is almost empty. Emptying battery on N950 is
> pretty painful, as flasher needs to be used to recover phone in such
> case.

Sebastian, ping? This one should not be too controversial.

If you could also apply the "shut down when battery is low", that
would be nice.

Thanks,
								Pavel

> Signed-off-by: Pavel Machek <pavel@ucw.cz>
> 
> diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
> index 51f0961..f684288 100644
> --- a/drivers/power/supply/bq27xxx_battery.c
> +++ b/drivers/power/supply/bq27xxx_battery.c
> @@ -323,6 +323,30 @@ static u8
>  		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
>  		BQ27XXX_DM_REG_ROWS,
>  	},
> +	bq27521_regs[BQ27XXX_REG_MAX] = {
> +		[BQ27XXX_REG_CTRL] = 0x02,
> +		[BQ27XXX_REG_TEMP] = 0x0a,
> +		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_VOLT] = 0x0c,
> +		[BQ27XXX_REG_AI] = 0x0e,
> +		[BQ27XXX_REG_FLAGS] = 0x08,
> +		[BQ27XXX_REG_TTE] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_FCC] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_CYCT] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_SOC] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
> +		[BQ27XXX_DM_CTRL] = INVALID_REG_ADDR,
> +		[BQ27XXX_DM_CLASS] = INVALID_REG_ADDR,
> +		[BQ27XXX_DM_BLOCK] = INVALID_REG_ADDR,
> +		[BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
> +		[BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
> +	},
>  	bq27530_regs[BQ27XXX_REG_MAX] = {
>  		[BQ27XXX_REG_CTRL] = 0x00,
>  		[BQ27XXX_REG_TEMP] = 0x06,
> @@ -557,6 +581,15 @@ static enum power_supply_property bq27520g4_props[] = {
>  	POWER_SUPPLY_PROP_MANUFACTURER,
>  };
>  
> +static enum power_supply_property bq27521_props[] = {
> +	POWER_SUPPLY_PROP_STATUS,
> +	POWER_SUPPLY_PROP_PRESENT,
> +	POWER_SUPPLY_PROP_VOLTAGE_NOW,
> +	POWER_SUPPLY_PROP_CURRENT_NOW,
> +	POWER_SUPPLY_PROP_TEMP,
> +	POWER_SUPPLY_PROP_TECHNOLOGY,
> +};
> +
>  static enum power_supply_property bq27530_props[] = {
>  	POWER_SUPPLY_PROP_STATUS,
>  	POWER_SUPPLY_PROP_PRESENT,
> @@ -671,6 +704,7 @@ static struct bq27xxx_dm_reg bq27500_dm_regs[] = {
>  #define bq27520g2_dm_regs 0
>  #define bq27520g3_dm_regs 0
>  #define bq27520g4_dm_regs 0
> +#define bq27521_dm_regs 0
>  #define bq27530_dm_regs 0
>  #define bq27531_dm_regs 0
>  #define bq27541_dm_regs 0
> @@ -717,8 +751,8 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
>  #endif
>  
>  #define BQ27XXX_O_ZERO	0x00000001
> -#define BQ27XXX_O_OTDC	0x00000002
> -#define BQ27XXX_O_UTOT  0x00000004
> +#define BQ27XXX_O_OTDC	0x00000002 /* has OTC/OTD overtemperature flags */
> +#define BQ27XXX_O_UTOT  0x00000004 /* has OT overtemperature flag */
>  #define BQ27XXX_O_CFGUP	0x00000008
>  #define BQ27XXX_O_RAM	0x00000010
>  
> @@ -751,6 +785,7 @@ static struct {
>  	[BQ27520G2] = BQ27XXX_DATA(bq27520g2, 0         , BQ27XXX_O_OTDC),
>  	[BQ27520G3] = BQ27XXX_DATA(bq27520g3, 0         , BQ27XXX_O_OTDC),
>  	[BQ27520G4] = BQ27XXX_DATA(bq27520g4, 0         , BQ27XXX_O_OTDC),
> +	[BQ27521]   = BQ27XXX_DATA(bq27521,   0         , 0),
>  	[BQ27530]   = BQ27XXX_DATA(bq27530,   0         , BQ27XXX_O_UTOT),
>  	[BQ27531]   = BQ27XXX_DATA(bq27531,   0         , BQ27XXX_O_UTOT),
>  	[BQ27541]   = BQ27XXX_DATA(bq27541,   0         , BQ27XXX_O_OTDC),
> diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
> index 0b11ed4..6b25e5f 100644
> --- a/drivers/power/supply/bq27xxx_battery_i2c.c
> +++ b/drivers/power/supply/bq27xxx_battery_i2c.c
> @@ -239,6 +239,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
>  	{ "bq27520g2", BQ27520G2 },
>  	{ "bq27520g3", BQ27520G3 },
>  	{ "bq27520g4", BQ27520G4 },
> +	{ "bq27521", BQ27521 },
>  	{ "bq27530", BQ27530 },
>  	{ "bq27531", BQ27531 },
>  	{ "bq27541", BQ27541 },
> @@ -269,6 +270,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
>  	{ .compatible = "ti,bq27520g2" },
>  	{ .compatible = "ti,bq27520g3" },
>  	{ .compatible = "ti,bq27520g4" },
> +	{ .compatible = "ti,bq27521" },
>  	{ .compatible = "ti,bq27530" },
>  	{ .compatible = "ti,bq27531" },
>  	{ .compatible = "ti,bq27541" },
> diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h
> index 9ad7828..6547d30 100644
> --- a/include/linux/mfd/twl.h
> +++ b/include/linux/mfd/twl.h
> @@ -70,6 +70,7 @@ enum twl4030_module_ids {
>  	TWL4030_MODULE_INT,
>  
>  	TWL5031_MODULE_ACCESSORY,
> +	TWL5031_MODULE_BCC,
>  	TWL5031_MODULE_INTERRUPTS,
>  
>  	TWL4030_MODULE_LAST,
> diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
> index 43194e0..d8d127a 100644
> --- a/include/linux/power/bq27xxx_battery.h
> +++ b/include/linux/power/bq27xxx_battery.h
> @@ -15,6 +15,7 @@ enum bq27xxx_chip {
>  	BQ27520G2, /* bq27520G2 */
>  	BQ27520G3, /* bq27520G3 */
>  	BQ27520G4, /* bq27520G4 */
> +	BQ27521, /* bq27521 */	
>  	BQ27530, /* bq27530, bq27531 */
>  	BQ27531,
>  	BQ27541, /* bq27541, bq27542, bq27546, bq27742 */
>
Andrew Davis Dec. 4, 2017, 3:20 p.m. UTC | #2 
On 12/01/2017 05:06 PM, Pavel Machek wrote:
> Hi!
> 
>> This adds basic support for BQ27521 battery monitor, used in Nokia N9
>> and N950. In particular, battery voltage is important to be able to
>> tell when the battery is almost empty. Emptying battery on N950 is
>> pretty painful, as flasher needs to be used to recover phone in such
>> case.
> 
> Sebastian, ping? This one should not be too controversial.
> 
> If you could also apply the "shut down when battery is low", that
> would be nice.
> 
> Thanks,
> 								Pavel
> 
>> Signed-off-by: Pavel Machek <pavel@ucw.cz>
>>
>> diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
>> index 51f0961..f684288 100644
>> --- a/drivers/power/supply/bq27xxx_battery.c
>> +++ b/drivers/power/supply/bq27xxx_battery.c
>> @@ -323,6 +323,30 @@ static u8
>>  		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
>>  		BQ27XXX_DM_REG_ROWS,
>>  	},
>> +	bq27521_regs[BQ27XXX_REG_MAX] = {
>> +		[BQ27XXX_REG_CTRL] = 0x02,
>> +		[BQ27XXX_REG_TEMP] = 0x0a,
>> +		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_VOLT] = 0x0c,
>> +		[BQ27XXX_REG_AI] = 0x0e,
>> +		[BQ27XXX_REG_FLAGS] = 0x08,
>> +		[BQ27XXX_REG_TTE] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_FCC] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_CYCT] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_SOC] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
>> +		[BQ27XXX_DM_CTRL] = INVALID_REG_ADDR,
>> +		[BQ27XXX_DM_CLASS] = INVALID_REG_ADDR,
>> +		[BQ27XXX_DM_BLOCK] = INVALID_REG_ADDR,
>> +		[BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
>> +		[BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
>> +	},
>>  	bq27530_regs[BQ27XXX_REG_MAX] = {
>>  		[BQ27XXX_REG_CTRL] = 0x00,
>>  		[BQ27XXX_REG_TEMP] = 0x06,
>> @@ -557,6 +581,15 @@ static enum power_supply_property bq27520g4_props[] = {
>>  	POWER_SUPPLY_PROP_MANUFACTURER,
>>  };
>>  
>> +static enum power_supply_property bq27521_props[] = {
>> +	POWER_SUPPLY_PROP_STATUS,
>> +	POWER_SUPPLY_PROP_PRESENT,
>> +	POWER_SUPPLY_PROP_VOLTAGE_NOW,
>> +	POWER_SUPPLY_PROP_CURRENT_NOW,
>> +	POWER_SUPPLY_PROP_TEMP,
>> +	POWER_SUPPLY_PROP_TECHNOLOGY,
>> +};
>> +
>>  static enum power_supply_property bq27530_props[] = {
>>  	POWER_SUPPLY_PROP_STATUS,
>>  	POWER_SUPPLY_PROP_PRESENT,
>> @@ -671,6 +704,7 @@ static struct bq27xxx_dm_reg bq27500_dm_regs[] = {
>>  #define bq27520g2_dm_regs 0
>>  #define bq27520g3_dm_regs 0
>>  #define bq27520g4_dm_regs 0
>> +#define bq27521_dm_regs 0
>>  #define bq27530_dm_regs 0
>>  #define bq27531_dm_regs 0
>>  #define bq27541_dm_regs 0
>> @@ -717,8 +751,8 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
>>  #endif
>>  
>>  #define BQ27XXX_O_ZERO	0x00000001
>> -#define BQ27XXX_O_OTDC	0x00000002
>> -#define BQ27XXX_O_UTOT  0x00000004
>> +#define BQ27XXX_O_OTDC	0x00000002 /* has OTC/OTD overtemperature flags */
>> +#define BQ27XXX_O_UTOT  0x00000004 /* has OT overtemperature flag */

These should get turned into BIT() macros, but that's not your problem
for this patch,


Acked-by: Andrew F. Davis <afd@ti.com>


>>  #define BQ27XXX_O_CFGUP	0x00000008
>>  #define BQ27XXX_O_RAM	0x00000010
>>  
>> @@ -751,6 +785,7 @@ static struct {
>>  	[BQ27520G2] = BQ27XXX_DATA(bq27520g2, 0         , BQ27XXX_O_OTDC),
>>  	[BQ27520G3] = BQ27XXX_DATA(bq27520g3, 0         , BQ27XXX_O_OTDC),
>>  	[BQ27520G4] = BQ27XXX_DATA(bq27520g4, 0         , BQ27XXX_O_OTDC),
>> +	[BQ27521]   = BQ27XXX_DATA(bq27521,   0         , 0),
>>  	[BQ27530]   = BQ27XXX_DATA(bq27530,   0         , BQ27XXX_O_UTOT),
>>  	[BQ27531]   = BQ27XXX_DATA(bq27531,   0         , BQ27XXX_O_UTOT),
>>  	[BQ27541]   = BQ27XXX_DATA(bq27541,   0         , BQ27XXX_O_OTDC),
>> diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
>> index 0b11ed4..6b25e5f 100644
>> --- a/drivers/power/supply/bq27xxx_battery_i2c.c
>> +++ b/drivers/power/supply/bq27xxx_battery_i2c.c
>> @@ -239,6 +239,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
>>  	{ "bq27520g2", BQ27520G2 },
>>  	{ "bq27520g3", BQ27520G3 },
>>  	{ "bq27520g4", BQ27520G4 },
>> +	{ "bq27521", BQ27521 },
>>  	{ "bq27530", BQ27530 },
>>  	{ "bq27531", BQ27531 },
>>  	{ "bq27541", BQ27541 },
>> @@ -269,6 +270,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
>>  	{ .compatible = "ti,bq27520g2" },
>>  	{ .compatible = "ti,bq27520g3" },
>>  	{ .compatible = "ti,bq27520g4" },
>> +	{ .compatible = "ti,bq27521" },
>>  	{ .compatible = "ti,bq27530" },
>>  	{ .compatible = "ti,bq27531" },
>>  	{ .compatible = "ti,bq27541" },
>> diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h
>> index 9ad7828..6547d30 100644
>> --- a/include/linux/mfd/twl.h
>> +++ b/include/linux/mfd/twl.h
>> @@ -70,6 +70,7 @@ enum twl4030_module_ids {
>>  	TWL4030_MODULE_INT,
>>  
>>  	TWL5031_MODULE_ACCESSORY,
>> +	TWL5031_MODULE_BCC,
>>  	TWL5031_MODULE_INTERRUPTS,
>>  
>>  	TWL4030_MODULE_LAST,
>> diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
>> index 43194e0..d8d127a 100644
>> --- a/include/linux/power/bq27xxx_battery.h
>> +++ b/include/linux/power/bq27xxx_battery.h
>> @@ -15,6 +15,7 @@ enum bq27xxx_chip {
>>  	BQ27520G2, /* bq27520G2 */
>>  	BQ27520G3, /* bq27520G3 */
>>  	BQ27520G4, /* bq27520G4 */
>> +	BQ27521, /* bq27521 */	
>>  	BQ27530, /* bq27530, bq27531 */
>>  	BQ27531,
>>  	BQ27541, /* bq27541, bq27542, bq27546, bq27742 */
>>
> 
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Sebastian Reichel Dec. 8, 2017, 5:06 p.m. UTC | #3 
Hi,

On Mon, Dec 04, 2017 at 09:20:33AM -0600, Andrew F. Davis wrote:
> On 12/01/2017 05:06 PM, Pavel Machek wrote:
> > Hi!
> > 
> >> This adds basic support for BQ27521 battery monitor, used in Nokia N9
> >> and N950. In particular, battery voltage is important to be able to
> >> tell when the battery is almost empty. Emptying battery on N950 is
> >> pretty painful, as flasher needs to be used to recover phone in such
> >> case.
> > 
> > Sebastian, ping? This one should not be too controversial.
>
> Acked-by: Andrew F. Davis <afd@ti.com>

Thanks, queued, I dropped the spurious change in twl.h and added the
dt-binding from the previous patch version, that was lost somehow.

> > If you could also apply the "shut down when battery is low", that
> > would be nice.

I only have one with values specific to N900 hardcoded in the
driver. That one can't be applied for obvious reasons.

-- Sebastian
Pavel Machek Dec. 13, 2017, 8:39 a.m. UTC | #4 
Hi!

> > >> This adds basic support for BQ27521 battery monitor, used in Nokia N9
> > >> and N950. In particular, battery voltage is important to be able to
> > >> tell when the battery is almost empty. Emptying battery on N950 is
> > >> pretty painful, as flasher needs to be used to recover phone in such
> > >> case.
> > > 
> > > Sebastian, ping? This one should not be too controversial.
> >
> > Acked-by: Andrew F. Davis <afd@ti.com>
> 
> Thanks, queued, I dropped the spurious change in twl.h and added the
> dt-binding from the previous patch version, that was lost somehow.

Thanks!

> > > If you could also apply the "shut down when battery is low", that
> > > would be nice.
> 
> I only have one with values specific to N900 hardcoded in the
> driver. That one can't be applied for obvious reasons.

Well... the values are not really N900-specific. They should work well
on anything with lithium battery, because they basically depend only
on battery chemistry.

I guess I can simplify patch to work with battery voltage only --
that's what hardware battery protection does -- and make shutdown
voltage configurable ...?

Best regards,
									Pavel
diff mbox

Patch

diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index 51f0961..f684288 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -323,6 +323,30 @@  static u8
 		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
 		BQ27XXX_DM_REG_ROWS,
 	},
+	bq27521_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x02,
+		[BQ27XXX_REG_TEMP] = 0x0a,
+		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_VOLT] = 0x0c,
+		[BQ27XXX_REG_AI] = 0x0e,
+		[BQ27XXX_REG_FLAGS] = 0x08,
+		[BQ27XXX_REG_TTE] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_FCC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_CYCT] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_SOC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_CTRL] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_CLASS] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_BLOCK] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
+	},
 	bq27530_regs[BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_CTRL] = 0x00,
 		[BQ27XXX_REG_TEMP] = 0x06,
@@ -557,6 +581,15 @@  static enum power_supply_property bq27520g4_props[] = {
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
+static enum power_supply_property bq27521_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+};
+
 static enum power_supply_property bq27530_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
@@ -671,6 +704,7 @@  static struct bq27xxx_dm_reg bq27500_dm_regs[] = {
 #define bq27520g2_dm_regs 0
 #define bq27520g3_dm_regs 0
 #define bq27520g4_dm_regs 0
+#define bq27521_dm_regs 0
 #define bq27530_dm_regs 0
 #define bq27531_dm_regs 0
 #define bq27541_dm_regs 0
@@ -717,8 +751,8 @@  static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
 #endif
 
 #define BQ27XXX_O_ZERO	0x00000001
-#define BQ27XXX_O_OTDC	0x00000002
-#define BQ27XXX_O_UTOT  0x00000004
+#define BQ27XXX_O_OTDC	0x00000002 /* has OTC/OTD overtemperature flags */
+#define BQ27XXX_O_UTOT  0x00000004 /* has OT overtemperature flag */
 #define BQ27XXX_O_CFGUP	0x00000008
 #define BQ27XXX_O_RAM	0x00000010
 
@@ -751,6 +785,7 @@  static struct {
 	[BQ27520G2] = BQ27XXX_DATA(bq27520g2, 0         , BQ27XXX_O_OTDC),
 	[BQ27520G3] = BQ27XXX_DATA(bq27520g3, 0         , BQ27XXX_O_OTDC),
 	[BQ27520G4] = BQ27XXX_DATA(bq27520g4, 0         , BQ27XXX_O_OTDC),
+	[BQ27521]   = BQ27XXX_DATA(bq27521,   0         , 0),
 	[BQ27530]   = BQ27XXX_DATA(bq27530,   0         , BQ27XXX_O_UTOT),
 	[BQ27531]   = BQ27XXX_DATA(bq27531,   0         , BQ27XXX_O_UTOT),
 	[BQ27541]   = BQ27XXX_DATA(bq27541,   0         , BQ27XXX_O_OTDC),
diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
index 0b11ed4..6b25e5f 100644
--- a/drivers/power/supply/bq27xxx_battery_i2c.c
+++ b/drivers/power/supply/bq27xxx_battery_i2c.c
@@ -239,6 +239,7 @@  static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
 	{ "bq27520g2", BQ27520G2 },
 	{ "bq27520g3", BQ27520G3 },
 	{ "bq27520g4", BQ27520G4 },
+	{ "bq27521", BQ27521 },
 	{ "bq27530", BQ27530 },
 	{ "bq27531", BQ27531 },
 	{ "bq27541", BQ27541 },
@@ -269,6 +270,7 @@  static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
 	{ .compatible = "ti,bq27520g2" },
 	{ .compatible = "ti,bq27520g3" },
 	{ .compatible = "ti,bq27520g4" },
+	{ .compatible = "ti,bq27521" },
 	{ .compatible = "ti,bq27530" },
 	{ .compatible = "ti,bq27531" },
 	{ .compatible = "ti,bq27541" },
diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h
index 9ad7828..6547d30 100644
--- a/include/linux/mfd/twl.h
+++ b/include/linux/mfd/twl.h
@@ -70,6 +70,7 @@  enum twl4030_module_ids {
 	TWL4030_MODULE_INT,
 
 	TWL5031_MODULE_ACCESSORY,
+	TWL5031_MODULE_BCC,
 	TWL5031_MODULE_INTERRUPTS,
 
 	TWL4030_MODULE_LAST,
diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
index 43194e0..d8d127a 100644
--- a/include/linux/power/bq27xxx_battery.h
+++ b/include/linux/power/bq27xxx_battery.h
@@ -15,6 +15,7 @@  enum bq27xxx_chip {
 	BQ27520G2, /* bq27520G2 */
 	BQ27520G3, /* bq27520G3 */
 	BQ27520G4, /* bq27520G4 */
+	BQ27521, /* bq27521 */	
 	BQ27530, /* bq27530, bq27531 */
 	BQ27531,
 	BQ27541, /* bq27541, bq27542, bq27546, bq27742 */