diff mbox

[v2,3/3] PCI: dra7xx: Enable x2 mode support for dra74x, dra76x and dra72x

Message ID 20171219085823.8695-4-kishon@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Kishon Vijay Abraham I Dec. 19, 2017, 8:58 a.m. UTC
dra74x/dra76x and dra72x has separate compatible strings. Add support
for these compatible strings in pci-dra7xx driver to perform syscon
configurations required to get x2 mode working.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/dwc/pci-dra7xx.c | 90 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 90 insertions(+)

Comments

Lorenzo Pieralisi Feb. 26, 2018, 10:30 a.m. UTC | #1
On Tue, Dec 19, 2017 at 02:28:23PM +0530, Kishon Vijay Abraham I wrote:
> dra74x/dra76x and dra72x has separate compatible strings. Add support

s/has/have

> for these compatible strings in pci-dra7xx driver to perform syscon
> configurations required to get x2 mode working.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  drivers/pci/dwc/pci-dra7xx.c | 90 ++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 90 insertions(+)
> 
> diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
> index e77a4ceed74c..3b4427c10228 100644
> --- a/drivers/pci/dwc/pci-dra7xx.c
> +++ b/drivers/pci/dwc/pci-dra7xx.c
> @@ -83,11 +83,15 @@
>  #define MSI_REQ_GRANT					BIT(0)
>  #define MSI_VECTOR_SHIFT				7
>  
> +#define PCIE_1LANE_2LANE_SELECTION			BIT(13)
> +#define PCIE_B1C0_MODE_SEL				BIT(2)
> +
>  struct dra7xx_pcie {
>  	struct dw_pcie		*pci;
>  	void __iomem		*base;		/* DT ti_conf */
>  	int			phy_count;	/* DT phy-names count */
>  	struct phy		**phy;
> +	u32			*b1c0_mask;

This looks unused in the current patch.

>  	int			link_gen;
>  	struct irq_domain	*irq_domain;
>  	enum dw_pcie_device_mode mode;
> @@ -95,6 +99,7 @@ struct dra7xx_pcie {
>  
>  struct dra7xx_pcie_of_data {
>  	enum dw_pcie_device_mode mode;
> +	u32 b1co_mode_sel_mask;
>  };
>  
>  #define to_dra7xx_pcie(x)	dev_get_drvdata((x)->dev)
> @@ -533,6 +538,26 @@ static const struct dra7xx_pcie_of_data dra7xx_pcie_ep_of_data = {
>  	.mode = DW_PCIE_EP_TYPE,
>  };
>  
> +static const struct dra7xx_pcie_of_data dra746_pcie_rc_of_data = {
> +	.b1co_mode_sel_mask = BIT(2),

Nit: DT guys are more familiar than me on how this data should be
encoded but maybe bit offset + length can be better ? I do not know, I
have no problem leaving them as masks.

> +	.mode = DW_PCIE_RC_TYPE,
> +};
> +
> +static const struct dra7xx_pcie_of_data dra726_pcie_rc_of_data = {
> +	.b1co_mode_sel_mask = GENMASK(3, 2),
> +	.mode = DW_PCIE_RC_TYPE,
> +};
> +
> +static const struct dra7xx_pcie_of_data dra746_pcie_ep_of_data = {
> +	.b1co_mode_sel_mask = BIT(2),
> +	.mode = DW_PCIE_EP_TYPE,
> +};
> +
> +static const struct dra7xx_pcie_of_data dra726_pcie_ep_of_data = {
> +	.b1co_mode_sel_mask = GENMASK(3, 2),
> +	.mode = DW_PCIE_EP_TYPE,
> +};
> +
>  static const struct of_device_id of_dra7xx_pcie_match[] = {
>  	{
>  		.compatible = "ti,dra7-pcie",
> @@ -542,6 +567,22 @@ static const struct of_device_id of_dra7xx_pcie_match[] = {
>  		.compatible = "ti,dra7-pcie-ep",
>  		.data = &dra7xx_pcie_ep_of_data,
>  	},
> +	{
> +		.compatible = "ti,dra746-pcie-rc",
> +		.data = &dra746_pcie_rc_of_data,
> +	},
> +	{
> +		.compatible = "ti,dra726-pcie-rc",
> +		.data = &dra726_pcie_rc_of_data,
> +	},
> +	{
> +		.compatible = "ti,dra746-pcie-ep",
> +		.data = &dra746_pcie_ep_of_data,
> +	},
> +	{
> +		.compatible = "ti,dra726-pcie-ep",
> +		.data = &dra726_pcie_ep_of_data,
> +	},
>  	{},
>  };
>  
> @@ -587,6 +628,47 @@ static int dra7xx_pcie_ep_unaligned_memaccess(struct device *dev)
>  	return ret;
>  }
>  
> +static int dra7xx_pcie_configure_two_lane(struct device *dev,
> +					  u32 b1co_mode_sel_mask)
> +{
> +	struct device_node *np = dev->of_node;
> +	struct regmap *pcie_syscon;
> +	unsigned int pcie_reg;
> +
> +	pcie_syscon = syscon_regmap_lookup_by_phandle(np,
> +						      "ti,syscon-lane-conf");
> +	if (IS_ERR(pcie_syscon)) {
> +		dev_err(dev, "unable to get ti,syscon-lane-conf\n");
> +		return -EINVAL;
> +	}
> +
> +	if (of_property_read_u32_index(np, "ti,syscon-lane-conf", 1,
> +				       &pcie_reg)) {
> +		dev_err(dev, "couldn't get lane configuration reg offset\n");
> +		return -EINVAL;
> +	}
> +
> +	regmap_update_bits(pcie_syscon, pcie_reg, PCIE_1LANE_2LANE_SELECTION,
> +			   PCIE_1LANE_2LANE_SELECTION);

I do not know if this can create issues but the regmap should clear
those bits in the error path ?

> +
> +	pcie_syscon = syscon_regmap_lookup_by_phandle(np, "ti,syscon-lane-sel");
> +	if (IS_ERR(pcie_syscon)) {
> +		dev_err(dev, "unable to get ti,syscon-lane-sel\n");
> +		return -EINVAL;
> +	}
> +
> +	if (of_property_read_u32_index(np, "ti,syscon-lane-sel", 1,
> +				       &pcie_reg)) {
> +		dev_err(dev, "couldn't get lane selection reg offset\n");
> +		return -EINVAL;
> +	}
> +
> +	regmap_update_bits(pcie_syscon, pcie_reg, b1co_mode_sel_mask,
> +			   PCIE_B1C0_MODE_SEL);
> +
> +	return 0;
> +}
> +
>  static int __init dra7xx_pcie_probe(struct platform_device *pdev)
>  {
>  	u32 reg;
> @@ -608,6 +690,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
>  	const struct of_device_id *match;
>  	const struct dra7xx_pcie_of_data *data;
>  	enum dw_pcie_device_mode mode;
> +	u32 b1co_mode_sel_mask;

Again, do you need this temporary variable (given that you pass the
value below) ?

Thanks,
Lorenzo

>  	match = of_match_device(of_match_ptr(of_dra7xx_pcie_match), dev);
>  	if (!match)
> @@ -615,6 +698,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
>  
>  	data = (struct dra7xx_pcie_of_data *)match->data;
>  	mode = (enum dw_pcie_device_mode)data->mode;
> +	b1co_mode_sel_mask = data->b1co_mode_sel_mask;
>  
>  	dra7xx = devm_kzalloc(dev, sizeof(*dra7xx), GFP_KERNEL);
>  	if (!dra7xx)
> @@ -673,6 +757,12 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
>  	dra7xx->pci = pci;
>  	dra7xx->phy_count = phy_count;
>  
> +	if (phy_count == 2) {
> +		ret = dra7xx_pcie_configure_two_lane(dev, b1co_mode_sel_mask);
> +		if (ret < 0)
> +			goto err_link;
> +	}
> +
>  	ret = dra7xx_pcie_enable_phy(dra7xx);
>  	if (ret) {
>  		dev_err(dev, "failed to enable phy\n");
> -- 
> 2.11.0
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kishon Vijay Abraham I Feb. 28, 2018, 12:04 p.m. UTC | #2
Hi Lorenzo,

On Monday 26 February 2018 04:00 PM, Lorenzo Pieralisi wrote:
> On Tue, Dec 19, 2017 at 02:28:23PM +0530, Kishon Vijay Abraham I wrote:
>> dra74x/dra76x and dra72x has separate compatible strings. Add support
> 
> s/has/have
> 
>> for these compatible strings in pci-dra7xx driver to perform syscon
>> configurations required to get x2 mode working.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>>  drivers/pci/dwc/pci-dra7xx.c | 90 ++++++++++++++++++++++++++++++++++++++++++++
>>  1 file changed, 90 insertions(+)
>>
>> diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
>> index e77a4ceed74c..3b4427c10228 100644
>> --- a/drivers/pci/dwc/pci-dra7xx.c
>> +++ b/drivers/pci/dwc/pci-dra7xx.c
>> @@ -83,11 +83,15 @@
>>  #define MSI_REQ_GRANT					BIT(0)
>>  #define MSI_VECTOR_SHIFT				7
>>  
>> +#define PCIE_1LANE_2LANE_SELECTION			BIT(13)
>> +#define PCIE_B1C0_MODE_SEL				BIT(2)
>> +
>>  struct dra7xx_pcie {
>>  	struct dw_pcie		*pci;
>>  	void __iomem		*base;		/* DT ti_conf */
>>  	int			phy_count;	/* DT phy-names count */
>>  	struct phy		**phy;
>> +	u32			*b1c0_mask;
> 
> This looks unused in the current patch.

yeah, I'll remove it while sending the next revision.
> 
>>  	int			link_gen;
>>  	struct irq_domain	*irq_domain;
>>  	enum dw_pcie_device_mode mode;
>> @@ -95,6 +99,7 @@ struct dra7xx_pcie {
>>  
>>  struct dra7xx_pcie_of_data {
>>  	enum dw_pcie_device_mode mode;
>> +	u32 b1co_mode_sel_mask;
>>  };
>>  
>>  #define to_dra7xx_pcie(x)	dev_get_drvdata((x)->dev)
>> @@ -533,6 +538,26 @@ static const struct dra7xx_pcie_of_data dra7xx_pcie_ep_of_data = {
>>  	.mode = DW_PCIE_EP_TYPE,
>>  };
>>  
>> +static const struct dra7xx_pcie_of_data dra746_pcie_rc_of_data = {
>> +	.b1co_mode_sel_mask = BIT(2),
> 
> Nit: DT guys are more familiar than me on how this data should be
> encoded but maybe bit offset + length can be better ? I do not know, I
> have no problem leaving them as masks.
> 
>> +	.mode = DW_PCIE_RC_TYPE,
>> +};
>> +
>> +static const struct dra7xx_pcie_of_data dra726_pcie_rc_of_data = {
>> +	.b1co_mode_sel_mask = GENMASK(3, 2),
>> +	.mode = DW_PCIE_RC_TYPE,
>> +};
>> +
>> +static const struct dra7xx_pcie_of_data dra746_pcie_ep_of_data = {
>> +	.b1co_mode_sel_mask = BIT(2),
>> +	.mode = DW_PCIE_EP_TYPE,
>> +};
>> +
>> +static const struct dra7xx_pcie_of_data dra726_pcie_ep_of_data = {
>> +	.b1co_mode_sel_mask = GENMASK(3, 2),
>> +	.mode = DW_PCIE_EP_TYPE,
>> +};
>> +
>>  static const struct of_device_id of_dra7xx_pcie_match[] = {
>>  	{
>>  		.compatible = "ti,dra7-pcie",
>> @@ -542,6 +567,22 @@ static const struct of_device_id of_dra7xx_pcie_match[] = {
>>  		.compatible = "ti,dra7-pcie-ep",
>>  		.data = &dra7xx_pcie_ep_of_data,
>>  	},
>> +	{
>> +		.compatible = "ti,dra746-pcie-rc",
>> +		.data = &dra746_pcie_rc_of_data,
>> +	},
>> +	{
>> +		.compatible = "ti,dra726-pcie-rc",
>> +		.data = &dra726_pcie_rc_of_data,
>> +	},
>> +	{
>> +		.compatible = "ti,dra746-pcie-ep",
>> +		.data = &dra746_pcie_ep_of_data,
>> +	},
>> +	{
>> +		.compatible = "ti,dra726-pcie-ep",
>> +		.data = &dra726_pcie_ep_of_data,
>> +	},
>>  	{},
>>  };
>>  
>> @@ -587,6 +628,47 @@ static int dra7xx_pcie_ep_unaligned_memaccess(struct device *dev)
>>  	return ret;
>>  }
>>  
>> +static int dra7xx_pcie_configure_two_lane(struct device *dev,
>> +					  u32 b1co_mode_sel_mask)
>> +{
>> +	struct device_node *np = dev->of_node;
>> +	struct regmap *pcie_syscon;
>> +	unsigned int pcie_reg;
>> +
>> +	pcie_syscon = syscon_regmap_lookup_by_phandle(np,
>> +						      "ti,syscon-lane-conf");
>> +	if (IS_ERR(pcie_syscon)) {
>> +		dev_err(dev, "unable to get ti,syscon-lane-conf\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	if (of_property_read_u32_index(np, "ti,syscon-lane-conf", 1,
>> +				       &pcie_reg)) {
>> +		dev_err(dev, "couldn't get lane configuration reg offset\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	regmap_update_bits(pcie_syscon, pcie_reg, PCIE_1LANE_2LANE_SELECTION,
>> +			   PCIE_1LANE_2LANE_SELECTION);
> 
> I do not know if this can create issues but the regmap should clear
> those bits in the error path ?

hmm yeah, maybe we should try to fall back to 1 lane mode.
> 
>> +
>> +	pcie_syscon = syscon_regmap_lookup_by_phandle(np, "ti,syscon-lane-sel");
>> +	if (IS_ERR(pcie_syscon)) {
>> +		dev_err(dev, "unable to get ti,syscon-lane-sel\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	if (of_property_read_u32_index(np, "ti,syscon-lane-sel", 1,
>> +				       &pcie_reg)) {
>> +		dev_err(dev, "couldn't get lane selection reg offset\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	regmap_update_bits(pcie_syscon, pcie_reg, b1co_mode_sel_mask,
>> +			   PCIE_B1C0_MODE_SEL);
>> +
>> +	return 0;
>> +}
>> +
>>  static int __init dra7xx_pcie_probe(struct platform_device *pdev)
>>  {
>>  	u32 reg;
>> @@ -608,6 +690,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
>>  	const struct of_device_id *match;
>>  	const struct dra7xx_pcie_of_data *data;
>>  	enum dw_pcie_device_mode mode;
>> +	u32 b1co_mode_sel_mask;
> 
> Again, do you need this temporary variable (given that you pass the
> value below) ?

I used so that we don't cross the 80 line character limit below.

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
index e77a4ceed74c..3b4427c10228 100644
--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -83,11 +83,15 @@ 
 #define MSI_REQ_GRANT					BIT(0)
 #define MSI_VECTOR_SHIFT				7
 
+#define PCIE_1LANE_2LANE_SELECTION			BIT(13)
+#define PCIE_B1C0_MODE_SEL				BIT(2)
+
 struct dra7xx_pcie {
 	struct dw_pcie		*pci;
 	void __iomem		*base;		/* DT ti_conf */
 	int			phy_count;	/* DT phy-names count */
 	struct phy		**phy;
+	u32			*b1c0_mask;
 	int			link_gen;
 	struct irq_domain	*irq_domain;
 	enum dw_pcie_device_mode mode;
@@ -95,6 +99,7 @@  struct dra7xx_pcie {
 
 struct dra7xx_pcie_of_data {
 	enum dw_pcie_device_mode mode;
+	u32 b1co_mode_sel_mask;
 };
 
 #define to_dra7xx_pcie(x)	dev_get_drvdata((x)->dev)
@@ -533,6 +538,26 @@  static const struct dra7xx_pcie_of_data dra7xx_pcie_ep_of_data = {
 	.mode = DW_PCIE_EP_TYPE,
 };
 
+static const struct dra7xx_pcie_of_data dra746_pcie_rc_of_data = {
+	.b1co_mode_sel_mask = BIT(2),
+	.mode = DW_PCIE_RC_TYPE,
+};
+
+static const struct dra7xx_pcie_of_data dra726_pcie_rc_of_data = {
+	.b1co_mode_sel_mask = GENMASK(3, 2),
+	.mode = DW_PCIE_RC_TYPE,
+};
+
+static const struct dra7xx_pcie_of_data dra746_pcie_ep_of_data = {
+	.b1co_mode_sel_mask = BIT(2),
+	.mode = DW_PCIE_EP_TYPE,
+};
+
+static const struct dra7xx_pcie_of_data dra726_pcie_ep_of_data = {
+	.b1co_mode_sel_mask = GENMASK(3, 2),
+	.mode = DW_PCIE_EP_TYPE,
+};
+
 static const struct of_device_id of_dra7xx_pcie_match[] = {
 	{
 		.compatible = "ti,dra7-pcie",
@@ -542,6 +567,22 @@  static const struct of_device_id of_dra7xx_pcie_match[] = {
 		.compatible = "ti,dra7-pcie-ep",
 		.data = &dra7xx_pcie_ep_of_data,
 	},
+	{
+		.compatible = "ti,dra746-pcie-rc",
+		.data = &dra746_pcie_rc_of_data,
+	},
+	{
+		.compatible = "ti,dra726-pcie-rc",
+		.data = &dra726_pcie_rc_of_data,
+	},
+	{
+		.compatible = "ti,dra746-pcie-ep",
+		.data = &dra746_pcie_ep_of_data,
+	},
+	{
+		.compatible = "ti,dra726-pcie-ep",
+		.data = &dra726_pcie_ep_of_data,
+	},
 	{},
 };
 
@@ -587,6 +628,47 @@  static int dra7xx_pcie_ep_unaligned_memaccess(struct device *dev)
 	return ret;
 }
 
+static int dra7xx_pcie_configure_two_lane(struct device *dev,
+					  u32 b1co_mode_sel_mask)
+{
+	struct device_node *np = dev->of_node;
+	struct regmap *pcie_syscon;
+	unsigned int pcie_reg;
+
+	pcie_syscon = syscon_regmap_lookup_by_phandle(np,
+						      "ti,syscon-lane-conf");
+	if (IS_ERR(pcie_syscon)) {
+		dev_err(dev, "unable to get ti,syscon-lane-conf\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32_index(np, "ti,syscon-lane-conf", 1,
+				       &pcie_reg)) {
+		dev_err(dev, "couldn't get lane configuration reg offset\n");
+		return -EINVAL;
+	}
+
+	regmap_update_bits(pcie_syscon, pcie_reg, PCIE_1LANE_2LANE_SELECTION,
+			   PCIE_1LANE_2LANE_SELECTION);
+
+	pcie_syscon = syscon_regmap_lookup_by_phandle(np, "ti,syscon-lane-sel");
+	if (IS_ERR(pcie_syscon)) {
+		dev_err(dev, "unable to get ti,syscon-lane-sel\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32_index(np, "ti,syscon-lane-sel", 1,
+				       &pcie_reg)) {
+		dev_err(dev, "couldn't get lane selection reg offset\n");
+		return -EINVAL;
+	}
+
+	regmap_update_bits(pcie_syscon, pcie_reg, b1co_mode_sel_mask,
+			   PCIE_B1C0_MODE_SEL);
+
+	return 0;
+}
+
 static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 {
 	u32 reg;
@@ -608,6 +690,7 @@  static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 	const struct of_device_id *match;
 	const struct dra7xx_pcie_of_data *data;
 	enum dw_pcie_device_mode mode;
+	u32 b1co_mode_sel_mask;
 
 	match = of_match_device(of_match_ptr(of_dra7xx_pcie_match), dev);
 	if (!match)
@@ -615,6 +698,7 @@  static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 
 	data = (struct dra7xx_pcie_of_data *)match->data;
 	mode = (enum dw_pcie_device_mode)data->mode;
+	b1co_mode_sel_mask = data->b1co_mode_sel_mask;
 
 	dra7xx = devm_kzalloc(dev, sizeof(*dra7xx), GFP_KERNEL);
 	if (!dra7xx)
@@ -673,6 +757,12 @@  static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 	dra7xx->pci = pci;
 	dra7xx->phy_count = phy_count;
 
+	if (phy_count == 2) {
+		ret = dra7xx_pcie_configure_two_lane(dev, b1co_mode_sel_mask);
+		if (ret < 0)
+			goto err_link;
+	}
+
 	ret = dra7xx_pcie_enable_phy(dra7xx);
 	if (ret) {
 		dev_err(dev, "failed to enable phy\n");