| Message ID | 20180110085315.GA17841@amd (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Pavel, On Wed, Jan 10, 2018 at 09:53:15AM +0100, Pavel Machek wrote: > From: Filip Matijević <filip.matijevic.pz@gmail.com> > > Add bindings for Nokia N9 audio components. > > Signed-off-by: Filip Matijević <filip.matijevic.pz@gmail.com> > Signed-off-by: Pavel Machek <pavel@ucw.cz> > > diff --git a/Documentation/devicetree/bindings/media/ti-wl1273.txt b/Documentation/devicetree/bindings/media/ti-wl1273.txt > new file mode 100644 > index 0000000..21db389 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/ti-wl1273.txt > @@ -0,0 +1,36 @@ > +Texas Instruments - wl1273 radio/bluetooth module > + > +Required properties: > + > +- compatible - "ti,wl1273-core" > +- reg - I2C slave address > +- interrupts - The interrupt output from the device. > +- interrupt-parent - The parent interrupt controller. > +- power-gpio - gpio pin to power the device. > + > +- wl1273radio child - compatible = "ti,wl1273-fm-radio"; I'd document this under a separate section, as the compatible property for the other child node. You use "property - description" here but "property: description" in the file below. It'd be nice to be consistent, albeit it's separate files. > + > +Optional properties: > + > +- wl1273codec child - compatible = "ti,wl1273codec"; "ti,wl1273-codec" > + > +Example: > + > +wl1273core: wl1273core@22 { > + compatible = "ti,wl1273-core"; > + reg = <0x22>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&wl1273_gpio>; > + > + interrupt-parent = <&gpio2>; > + interrupts = <11 2>; /* gpio_43, IRQF_TRIGGER_FALLING */ > + > + wl1273radio: wl1273radio { > + compatible = "ti,wl1273-fm-radio"; > + }; > + > + wl1273codec: wl1273codec { > + compatible = "ti,wl1273-codec"; > + }; > + }; > diff --git a/Documentation/devicetree/bindings/sound/nokia,n9.txt b/Documentation/devicetree/bindings/sound/nokia,n9.txt > new file mode 100644 > index 0000000..230b1eb > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/nokia,n9.txt > @@ -0,0 +1,32 @@ > +* Nokia N9/N950 audio setup > + A small description saying what this really is would be nice. > +Required properties: > +- compatible: "nokia,n9-audio" > + > +- nokia,twl4030-cpu-dai: phandle for the McBSP node connected to TWL4030 > +- nokia,tlv320dac33-cpu-dai: phandle for the McBSP node connected to TLV320DAC33 > +- nokia,wl1273-cpu-dai: phandle for the McBSP node connected to WL1273 > + > +- nokia,twl4030-codec: phandle for the TWL4030 codec > +- nokia,tlv320dac33-codec: phandle for the TLV320DAC33 codec > +- nokia,wl1273-codec: phandle for the WL1273 codec > +- nokia,headphone-amplifier: phandle for the TPA6130A2 node > + > +- nokia,speaker-amplifier-gpios: GPIO for speaker amplifier > + > +Example: > + > +sound: n9-audio { > + compatible = "nokia,n9-audio"; > + > + nokia,twl4030-cpu-dai = <&mcbsp3>; > + nokia,tlv320dac33-cpu-dai = <&mcbsp2>; > + nokia,wl1273-cpu-dai = <&mcbsp4>; > + > + nokia,twl4030-codec = <&twl4030_audio>; > + nokia,tlv320dac33-codec = <&tlv320dac33>; > + nokia,wl1273-codec = <&wl1273codec>; > + nokia,headphone-amplifier = <&tpa6140a2>; > + > + nokia,speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>; > +}; > diff --git a/Documentation/devicetree/bindings/sound/tlv320dac33.txt b/Documentation/devicetree/bindings/sound/tlv320dac33.txt > new file mode 100644 > index 0000000..8e981f7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/tlv320dac33.txt > @@ -0,0 +1,39 @@ > +Texas Instruments - tlv320dac33 Codec module > + > +The tlv320dac33 serial control bus communicates through I2C protocols. > + > +Required properties: > + > +- compatible - "ti,tlv320dac33" > +- reg - I2C slave address > + > +Optional properties: > + > +- power-gpio - gpio pin to power the device > + > +- avdd-supply, dvdd-supply, iovdd-supply: power supplies for the device as covered > + in Documentation/devicetree/bindings/regulator/regulator.txt > + > +- interrupts - The interrupt output from the device. > +- interrupt-parent - The parent interrupt controller. > + > +- ti,keep-bclk - Keep the BCLK running in FIFO modes > +- ti,burst-bclkdiv - BCLK divider value in burst mode > + > +Example: > + > +tlv320dac33: tlv320dac33@19 { > + compatible = "ti,tlv320dac33"; > + reg = <0x19>; > + > + avdd-supply = <&vaux4>; > + dvdd-supply = <&vio>; > + iovdd-supply = <&vio>; > + > + interrupt-parent = <&gpio2>; > + interrupts = <21 1>; /* gpio_53, IRQF_TRIGGER_RISING */ > + power-gpio = <&gpio2 28 0>; /* gpio_60 */ > + > + ti,keep-bclk; > + ti,burst-bclkdiv = /bits/ 8 <3>; > +}; >
Hi! > On Wed, Jan 10, 2018 at 09:53:15AM +0100, Pavel Machek wrote: > > From: Filip Matijević <filip.matijevic.pz@gmail.com> > > > > Add bindings for Nokia N9 audio components. > > > > Signed-off-by: Filip Matijević <filip.matijevic.pz@gmail.com> > > Signed-off-by: Pavel Machek <pavel@ucw.cz> > > > > diff --git a/Documentation/devicetree/bindings/media/ti-wl1273.txt b/Documentation/devicetree/bindings/media/ti-wl1273.txt > > new file mode 100644 > > index 0000000..21db389 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/ti-wl1273.txt > > @@ -0,0 +1,36 @@ > > +Texas Instruments - wl1273 radio/bluetooth module > > + > > +Required properties: > > + > > +- compatible - "ti,wl1273-core" > > +- reg - I2C slave address > > +- interrupts - The interrupt output from the device. > > +- interrupt-parent - The parent interrupt controller. > > +- power-gpio - gpio pin to power the device. > > + > > +- wl1273radio child - compatible = "ti,wl1273-fm-radio"; > > I'd document this under a separate section, as the compatible property for > the other child node. > > You use "property - description" here but "property: description" in the > file below. It'd be nice to be consistent, albeit it's separate > files. Heh. If we want to do consistency, it should be consistent in whole documentation. I looked at cec-gpio.txt and it uses both styles. Sampled few more files, and seems ":" is more common here. > > + > > +Optional properties: > > + > > +- wl1273codec child - compatible = "ti,wl1273codec"; > > "ti,wl1273-codec" Ok. > > diff --git a/Documentation/devicetree/bindings/sound/nokia,n9.txt b/Documentation/devicetree/bindings/sound/nokia,n9.txt > > new file mode 100644 > > index 0000000..230b1eb > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/sound/nokia,n9.txt > > @@ -0,0 +1,32 @@ > > +* Nokia N9/N950 audio setup > > + > > A small description saying what this really is would be nice. I'm actually not sure what to say here. Suggestions? Thanks, Pavel
On Wed, Jan 10, 2018 at 09:53:15AM +0100, Pavel Machek wrote: > From: Filip Matijević <filip.matijevic.pz@gmail.com> > > Add bindings for Nokia N9 audio components. > > Signed-off-by: Filip Matijević <filip.matijevic.pz@gmail.com> > Signed-off-by: Pavel Machek <pavel@ucw.cz> > > diff --git a/Documentation/devicetree/bindings/media/ti-wl1273.txt b/Documentation/devicetree/bindings/media/ti-wl1273.txt > new file mode 100644 > index 0000000..21db389 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/ti-wl1273.txt > @@ -0,0 +1,36 @@ > +Texas Instruments - wl1273 radio/bluetooth module bluetooth chips have a binding location: bindings/net/bluetooth. And we already have a WL1273 binding. Plus there's the one for the Nokia BT which I think can be TI chips with a different firmware and protocol. Is this related? > + > +Required properties: > + > +- compatible - "ti,wl1273-core" > +- reg - I2C slave address > +- interrupts - The interrupt output from the device. > +- interrupt-parent - The parent interrupt controller. > +- power-gpio - gpio pin to power the device. > + > +- wl1273radio child - compatible = "ti,wl1273-fm-radio"; AIUI, the FM radio is accessed thru the HCI interface aka shared transport via the UART. So it is already covered by the serial device binding for TI chips. > + > +Optional properties: > + > +- wl1273codec child - compatible = "ti,wl1273codec"; This is a codec or just BT audio I2S/PCM interface? > + > +Example: > + > +wl1273core: wl1273core@22 { > + compatible = "ti,wl1273-core"; > + reg = <0x22>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&wl1273_gpio>; > + > + interrupt-parent = <&gpio2>; > + interrupts = <11 2>; /* gpio_43, IRQF_TRIGGER_FALLING */ > + > + wl1273radio: wl1273radio { > + compatible = "ti,wl1273-fm-radio"; > + }; > + > + wl1273codec: wl1273codec { > + compatible = "ti,wl1273-codec"; > + }; > + }; > diff --git a/Documentation/devicetree/bindings/sound/nokia,n9.txt b/Documentation/devicetree/bindings/sound/nokia,n9.txt > new file mode 100644 > index 0000000..230b1eb > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/nokia,n9.txt > @@ -0,0 +1,32 @@ > +* Nokia N9/N950 audio setup > + > +Required properties: > +- compatible: "nokia,n9-audio" > + > +- nokia,twl4030-cpu-dai: phandle for the McBSP node connected to TWL4030 > +- nokia,tlv320dac33-cpu-dai: phandle for the McBSP node connected to TLV320DAC33 > +- nokia,wl1273-cpu-dai: phandle for the McBSP node connected to WL1273 > + > +- nokia,twl4030-codec: phandle for the TWL4030 codec > +- nokia,tlv320dac33-codec: phandle for the TLV320DAC33 codec > +- nokia,wl1273-codec: phandle for the WL1273 codec Both dais and codecs should just be lists with a defined order. > +- nokia,headphone-amplifier: phandle for the TPA6130A2 node The simple card or graph card binding don't work? At least follow them to the extent that they do work. > + > +- nokia,speaker-amplifier-gpios: GPIO for speaker amplifier > + > +Example: > + > +sound: n9-audio { > + compatible = "nokia,n9-audio"; > + > + nokia,twl4030-cpu-dai = <&mcbsp3>; > + nokia,tlv320dac33-cpu-dai = <&mcbsp2>; > + nokia,wl1273-cpu-dai = <&mcbsp4>; > + > + nokia,twl4030-codec = <&twl4030_audio>; > + nokia,tlv320dac33-codec = <&tlv320dac33>; > + nokia,wl1273-codec = <&wl1273codec>; > + nokia,headphone-amplifier = <&tpa6140a2>; > + > + nokia,speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>; > +}; > diff --git a/Documentation/devicetree/bindings/sound/tlv320dac33.txt b/Documentation/devicetree/bindings/sound/tlv320dac33.txt > new file mode 100644 > index 0000000..8e981f7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/tlv320dac33.txt > @@ -0,0 +1,39 @@ > +Texas Instruments - tlv320dac33 Codec module > + > +The tlv320dac33 serial control bus communicates through I2C protocols. > + > +Required properties: > + > +- compatible - "ti,tlv320dac33" > +- reg - I2C slave address > + > +Optional properties: > + > +- power-gpio - gpio pin to power the device power-gpios. Active high or low? > + > +- avdd-supply, dvdd-supply, iovdd-supply: power supplies for the device as covered > + in Documentation/devicetree/bindings/regulator/regulator.txt > + > +- interrupts - The interrupt output from the device. > +- interrupt-parent - The parent interrupt controller. > + > +- ti,keep-bclk - Keep the BCLK running in FIFO modes > +- ti,burst-bclkdiv - BCLK divider value in burst mode > + > +Example: > + > +tlv320dac33: tlv320dac33@19 { audio-codec@19 > + compatible = "ti,tlv320dac33"; > + reg = <0x19>; > + > + avdd-supply = <&vaux4>; > + dvdd-supply = <&vio>; > + iovdd-supply = <&vio>; > + > + interrupt-parent = <&gpio2>; > + interrupts = <21 1>; /* gpio_53, IRQF_TRIGGER_RISING */ > + power-gpio = <&gpio2 28 0>; /* gpio_60 */ > + > + ti,keep-bclk; > + ti,burst-bclkdiv = /bits/ 8 <3>; > +}; > > > -- > (english) http://www.livejournal.com/~pavelmachek > (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi! > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/ti-wl1273.txt > > @@ -0,0 +1,36 @@ > > +Texas Instruments - wl1273 radio/bluetooth module > > bluetooth chips have a binding location: bindings/net/bluetooth. > > And we already have a WL1273 binding. Plus there's the one for the Nokia > BT which I think can be TI chips with a different firmware and protocol. > Is this related? Ok, let me investigate wl1273 (and postpone it, audio is critical, FM radio -- not so much). > > index 0000000..230b1eb > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/sound/nokia,n9.txt > > @@ -0,0 +1,32 @@ > > +* Nokia N9/N950 audio setup > > + > > +Required properties: > > +- compatible: "nokia,n9-audio" > > + > > +- nokia,twl4030-cpu-dai: phandle for the McBSP node connected to TWL4030 > > +- nokia,tlv320dac33-cpu-dai: phandle for the McBSP node connected to TLV320DAC33 > > +- nokia,wl1273-cpu-dai: phandle for the McBSP node connected to WL1273 > > + > > +- nokia,twl4030-codec: phandle for the TWL4030 codec > > +- nokia,tlv320dac33-codec: phandle for the TLV320DAC33 codec > > +- nokia,wl1273-codec: phandle for the WL1273 codec > > Both dais and codecs should just be lists with a defined order. > > > +- nokia,headphone-amplifier: phandle for the TPA6130A2 node > > The simple card or graph card binding don't work? At least follow them > to the extent that they do work. Yep, that quite big changes for the driver... Thanks for pointers. I'm not sure what features simple card / graph card miss. > > +Texas Instruments - tlv320dac33 Codec module > > + > > +The tlv320dac33 serial control bus communicates through I2C protocols. > > + > > +Required properties: > > + > > +- compatible - "ti,tlv320dac33" > > +- reg - I2C slave address > > + > > +Optional properties: > > + > > +- power-gpio - gpio pin to power the device > > power-gpios. > > Active high or low? Ok, this one can be fixed easily, and I guess tlv320dac33 driver might be useful for someone else, so I'll try to merge it first. Thanks for review, > > + ti,burst-bclkdiv = /bits/ 8 <3>; Oh and I'll make this plain int. No need to play with bits. Best regards Pavel
diff --git a/Documentation/devicetree/bindings/media/ti-wl1273.txt b/Documentation/devicetree/bindings/media/ti-wl1273.txt new file mode 100644 index 0000000..21db389 --- /dev/null +++ b/Documentation/devicetree/bindings/media/ti-wl1273.txt @@ -0,0 +1,36 @@ +Texas Instruments - wl1273 radio/bluetooth module + +Required properties: + +- compatible - "ti,wl1273-core" +- reg - I2C slave address +- interrupts - The interrupt output from the device. +- interrupt-parent - The parent interrupt controller. +- power-gpio - gpio pin to power the device. + +- wl1273radio child - compatible = "ti,wl1273-fm-radio"; + +Optional properties: + +- wl1273codec child - compatible = "ti,wl1273codec"; + +Example: + +wl1273core: wl1273core@22 { + compatible = "ti,wl1273-core"; + reg = <0x22>; + + pinctrl-names = "default"; + pinctrl-0 = <&wl1273_gpio>; + + interrupt-parent = <&gpio2>; + interrupts = <11 2>; /* gpio_43, IRQF_TRIGGER_FALLING */ + + wl1273radio: wl1273radio { + compatible = "ti,wl1273-fm-radio"; + }; + + wl1273codec: wl1273codec { + compatible = "ti,wl1273-codec"; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/nokia,n9.txt b/Documentation/devicetree/bindings/sound/nokia,n9.txt new file mode 100644 index 0000000..230b1eb --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nokia,n9.txt @@ -0,0 +1,32 @@ +* Nokia N9/N950 audio setup + +Required properties: +- compatible: "nokia,n9-audio" + +- nokia,twl4030-cpu-dai: phandle for the McBSP node connected to TWL4030 +- nokia,tlv320dac33-cpu-dai: phandle for the McBSP node connected to TLV320DAC33 +- nokia,wl1273-cpu-dai: phandle for the McBSP node connected to WL1273 + +- nokia,twl4030-codec: phandle for the TWL4030 codec +- nokia,tlv320dac33-codec: phandle for the TLV320DAC33 codec +- nokia,wl1273-codec: phandle for the WL1273 codec +- nokia,headphone-amplifier: phandle for the TPA6130A2 node + +- nokia,speaker-amplifier-gpios: GPIO for speaker amplifier + +Example: + +sound: n9-audio { + compatible = "nokia,n9-audio"; + + nokia,twl4030-cpu-dai = <&mcbsp3>; + nokia,tlv320dac33-cpu-dai = <&mcbsp2>; + nokia,wl1273-cpu-dai = <&mcbsp4>; + + nokia,twl4030-codec = <&twl4030_audio>; + nokia,tlv320dac33-codec = <&tlv320dac33>; + nokia,wl1273-codec = <&wl1273codec>; + nokia,headphone-amplifier = <&tpa6140a2>; + + nokia,speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/sound/tlv320dac33.txt b/Documentation/devicetree/bindings/sound/tlv320dac33.txt new file mode 100644 index 0000000..8e981f7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tlv320dac33.txt @@ -0,0 +1,39 @@ +Texas Instruments - tlv320dac33 Codec module + +The tlv320dac33 serial control bus communicates through I2C protocols. + +Required properties: + +- compatible - "ti,tlv320dac33" +- reg - I2C slave address + +Optional properties: + +- power-gpio - gpio pin to power the device + +- avdd-supply, dvdd-supply, iovdd-supply: power supplies for the device as covered + in Documentation/devicetree/bindings/regulator/regulator.txt + +- interrupts - The interrupt output from the device. +- interrupt-parent - The parent interrupt controller. + +- ti,keep-bclk - Keep the BCLK running in FIFO modes +- ti,burst-bclkdiv - BCLK divider value in burst mode + +Example: + +tlv320dac33: tlv320dac33@19 { + compatible = "ti,tlv320dac33"; + reg = <0x19>; + + avdd-supply = <&vaux4>; + dvdd-supply = <&vio>; + iovdd-supply = <&vio>; + + interrupt-parent = <&gpio2>; + interrupts = <21 1>; /* gpio_53, IRQF_TRIGGER_RISING */ + power-gpio = <&gpio2 28 0>; /* gpio_60 */ + + ti,keep-bclk; + ti,burst-bclkdiv = /bits/ 8 <3>; +};