diff mbox

[PATCHv2] tlv320dac33: Add device tree bindings

Message ID 20180131190112.GA31608@amd (mailing list archive)
State New, archived
Headers show

Commit Message

Pavel Machek Jan. 31, 2018, 7:01 p.m. UTC
This adds device tree bindings for tlv320dac33.c.

Signed-off-by: Pavel Machek <pavel@ucw.cz>

Comments

Peter Ujfalusi Feb. 1, 2018, 7:39 a.m. UTC | #1
On 2018-01-31 21:01, Pavel Machek wrote:
> 
> This adds device tree bindings for tlv320dac33.c.

Can you CC me for dac33 patches in the future, please?

Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

> Signed-off-by: Pavel Machek <pavel@ucw.cz>
> 
> diff --git a/Documentation/devicetree/bindings/sound/tlv320dac33.txt b/Documentation/devicetree/bindings/sound/tlv320dac33.txt
> new file mode 100644
> index 0000000..7fdda95
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/tlv320dac33.txt
> @@ -0,0 +1,32 @@
> +Texas Instruments - tlv320dac33 Codec module
> +
> +The tlv320dac33 serial control bus communicates through I2C protocols.
> +
> +Required properties:
> +
> +- compatible - "ti,tlv320dac33"
> +- reg - I2C slave address
> +
> +Optional properties:
> +
> +- reset-gpios - gpio pin to power the device, active low
> +
> +- interrupts       - The interrupt output from the device.
> +- interrupt-parent - The parent interrupt controller.
> +
> +- ti,keep-bclk 	- Keep the BCLK running in FIFO modes
> +- ti,burst-bclkdiv - BCLK divider value in burst mode
> +
> +Example:
> +
> +tlv320dac33: audio-codec@19 {
> +	compatible = "ti,tlv320dac33";
> +	reg = <0x19>;
> +
> +	interrupt-parent = <&gpio2>;
> +	interrupts = <21 1>; /* gpio_53, IRQF_TRIGGER_RISING */
> +	reset-gpios = <&gpio2 28 0>; /* gpio_60 */
> +
> +	ti,keep-bclk;
> +	ti,burst-bclkdiv = <3>;
> +};
> 
> 

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Rob Herring (Arm) Feb. 5, 2018, 6:08 a.m. UTC | #2
On Wed, Jan 31, 2018 at 08:01:12PM +0100, Pavel Machek wrote:
> 
> This adds device tree bindings for tlv320dac33.c.
> 
> Signed-off-by: Pavel Machek <pavel@ucw.cz>
> 
> diff --git a/Documentation/devicetree/bindings/sound/tlv320dac33.txt b/Documentation/devicetree/bindings/sound/tlv320dac33.txt
> new file mode 100644
> index 0000000..7fdda95
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/tlv320dac33.txt
> @@ -0,0 +1,32 @@
> +Texas Instruments - tlv320dac33 Codec module
> +
> +The tlv320dac33 serial control bus communicates through I2C protocols.
> +
> +Required properties:
> +
> +- compatible - "ti,tlv320dac33"
> +- reg - I2C slave address
> +
> +Optional properties:
> +
> +- reset-gpios - gpio pin to power the device, active low
> +
> +- interrupts       - The interrupt output from the device.
> +- interrupt-parent - The parent interrupt controller.
> +
> +- ti,keep-bclk 	- Keep the BCLK running in FIFO modes

space before tab ^

> +- ti,burst-bclkdiv - BCLK divider value in burst mode

What are valid values? What's the default?

> +
> +Example:
> +
> +tlv320dac33: audio-codec@19 {
> +	compatible = "ti,tlv320dac33";
> +	reg = <0x19>;
> +
> +	interrupt-parent = <&gpio2>;
> +	interrupts = <21 1>; /* gpio_53, IRQF_TRIGGER_RISING */
> +	reset-gpios = <&gpio2 28 0>; /* gpio_60 */
> +
> +	ti,keep-bclk;
> +	ti,burst-bclkdiv = <3>;
> +};
> 
> 
> -- 
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html


--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/sound/tlv320dac33.txt b/Documentation/devicetree/bindings/sound/tlv320dac33.txt
new file mode 100644
index 0000000..7fdda95
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tlv320dac33.txt
@@ -0,0 +1,32 @@ 
+Texas Instruments - tlv320dac33 Codec module
+
+The tlv320dac33 serial control bus communicates through I2C protocols.
+
+Required properties:
+
+- compatible - "ti,tlv320dac33"
+- reg - I2C slave address
+
+Optional properties:
+
+- reset-gpios - gpio pin to power the device, active low
+
+- interrupts       - The interrupt output from the device.
+- interrupt-parent - The parent interrupt controller.
+
+- ti,keep-bclk 	- Keep the BCLK running in FIFO modes
+- ti,burst-bclkdiv - BCLK divider value in burst mode
+
+Example:
+
+tlv320dac33: audio-codec@19 {
+	compatible = "ti,tlv320dac33";
+	reg = <0x19>;
+
+	interrupt-parent = <&gpio2>;
+	interrupts = <21 1>; /* gpio_53, IRQF_TRIGGER_RISING */
+	reset-gpios = <&gpio2 28 0>; /* gpio_60 */
+
+	ti,keep-bclk;
+	ti,burst-bclkdiv = <3>;
+};