| Message ID | 20180224205704.GB5132@amd (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On 2018-02-24 22:57, Pavel Machek wrote: > On Tue 2018-02-06 15:27:22, Mark Brown wrote: >> On Tue, Feb 06, 2018 at 02:49:06PM +0100, Pavel Machek wrote: >>> On Tue 2018-02-06 12:11:22, Mark Brown wrote: >> >>>> Please submit patches using subject lines reflecting the style for the >>>> subsystem. This makes it easier for people to identify relevant >>>> patches. Look at what existing commits in the area you're changing are >>>> doing and make sure your subject lines visually resemble what they're >>>> doing. >> >>> AFAICT this goes to Documentation, not sound. >> >> Even if that were the case you're not following the commonly accepted >> practice there either. >> >>> If you have any comments on V1 of this patch, that would be nice, I'd >>> like to get that merged once we are finished with the bindings. >> >> It is the middle of the merge window, please be a bit more patient. > > For the record, patch currently looks like this. If you have some > comments on the code, I'd like to hear them. > > Best regards, > diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c > index 8c71d2f..7302789 100644 > --- a/sound/soc/codecs/tlv320dac33.c > +++ b/sound/soc/codecs/tlv320dac33.c ... > @@ -1511,10 +1509,26 @@ static int dac33_i2c_probe(struct i2c_client *client, > > i2c_set_clientdata(client, dac33); > > - dac33->power_gpio = pdata->power_gpio; > - dac33->burst_bclkdiv = pdata->burst_bclkdiv; > - dac33->keep_bclk = pdata->keep_bclk; > - dac33->mode1_latency = pdata->mode1_latency; > + if (pdata) { > + dac33->power_gpio = pdata->power_gpio; > + dac33->burst_bclkdiv = pdata->burst_bclkdiv; > + dac33->keep_bclk = pdata->keep_bclk; > + dac33->mode1_latency = pdata->mode1_latency; > + } else if (np) { > + ret = of_get_named_gpio(np, "power-gpios", 0); > + if (ret >= 0) > + dac33->power_gpio = ret; > + else > + dac33->power_gpio = -1; the code checks for (dac33->power_gpio >= 0) in live path, I guess you can just skip the power_gpio = -1 in case we don't have GPIO Handling of EPROBE_DEFER might be something we might want for the GPIO. > + > + if (of_property_read_bool(np, "ti,keep-bclk")) > + dac33->keep_bclk = true; > + > + of_property_read_u32(np, "ti,burst-bclkdiv", &dac33->burst_bclkdiv); > + } else { > + dev_err(&client->dev, "Platform data not set\n"); > + return -ENODEV; > + } > if (!dac33->mode1_latency) > dac33->mode1_latency = 10000; /* 10ms */ > dac33->irq = client->irq; > @@ -1580,9 +1594,16 @@ static const struct i2c_device_id tlv320dac33_i2c_id[] = { > }; > MODULE_DEVICE_TABLE(i2c, tlv320dac33_i2c_id); > > +static const struct of_device_id tlv320dac33_of_match[] = { > + { .compatible = "ti,tlv320dac33", }, > + {}, > +}; > +MODULE_DEVICE_TABLE(i2c, tlv320dac33_of_match); > + > static struct i2c_driver tlv320dac33_i2c_driver = { > .driver = { > .name = "tlv320dac33-codec", > + .of_match_table = of_match_ptr(tlv320dac33_of_match), > }, > .probe = dac33_i2c_probe, > .remove = dac33_i2c_remove, > > - Péter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/sound/tlv320dac33.txt b/Documentation/devicetree/bindings/sound/tlv320dac33.txt new file mode 100644 index 0000000..aee0a87 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tlv320dac33.txt @@ -0,0 +1,32 @@ +Texas Instruments - tlv320dac33 Codec module + +The tlv320dac33 serial control bus communicates through I2C protocols. + +Required properties: + +- compatible - "ti,tlv320dac33" +- reg - I2C slave address +- ti,burst-bclkdiv - BCLK divider value in burst mode. Valid range is 1..255. + +Optional properties: + +- reset-gpios - gpio pin to power the device, active high. + +- interrupts - The interrupt output from the device. +- interrupt-parent - The parent interrupt controller. + +- ti,keep-bclk - Keep the BCLK running in FIFO modes. + +Example: + +tlv320dac33: audio-codec@19 { + compatible = "ti,tlv320dac33"; + reg = <0x19>; + + interrupt-parent = <&gpio2>; + interrupts = <21 1>; /* gpio_53, IRQF_TRIGGER_RISING */ + reset-gpios = <&gpio2 28 0>; /* gpio_60 */ + + ti,keep-bclk; + ti,burst-bclkdiv = <3>; +}; diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c index 8c71d2f..7302789 100644 --- a/sound/soc/codecs/tlv320dac33.c +++ b/sound/soc/codecs/tlv320dac33.c @@ -30,6 +32,7 @@ #include <linux/interrupt.h> #include <linux/gpio.h> #include <linux/regulator/consumer.h> +#include <linux/of_gpio.h> #include <linux/slab.h> #include <sound/core.h> #include <sound/pcm.h> @@ -105,7 +108,7 @@ struct tlv320dac33_priv { unsigned int nsample; /* burst read amount from host */ int mode1_latency; /* latency caused by the i2c writes in * us */ - u8 burst_bclkdiv; /* BCLK divider value in burst mode */ + u32 burst_bclkdiv; /* BCLK divider value in burst mode */ u8 *reg_cache; unsigned int burst_rate; /* Interface speed in Burst modes */ @@ -1483,16 +1486,11 @@ static struct snd_soc_dai_driver dac33_dai = { static int dac33_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct tlv320dac33_platform_data *pdata; + struct tlv320dac33_platform_data *pdata = client->dev.platform_data; struct tlv320dac33_priv *dac33; + struct device_node *np = client->dev.of_node; int ret, i; - if (client->dev.platform_data == NULL) { - dev_err(&client->dev, "Platform data not set\n"); - return -ENODEV; - } - pdata = client->dev.platform_data; - dac33 = devm_kzalloc(&client->dev, sizeof(struct tlv320dac33_priv), GFP_KERNEL); if (dac33 == NULL) @@ -1511,10 +1509,26 @@ static int dac33_i2c_probe(struct i2c_client *client, i2c_set_clientdata(client, dac33); - dac33->power_gpio = pdata->power_gpio; - dac33->burst_bclkdiv = pdata->burst_bclkdiv; - dac33->keep_bclk = pdata->keep_bclk; - dac33->mode1_latency = pdata->mode1_latency; + if (pdata) { + dac33->power_gpio = pdata->power_gpio; + dac33->burst_bclkdiv = pdata->burst_bclkdiv; + dac33->keep_bclk = pdata->keep_bclk; + dac33->mode1_latency = pdata->mode1_latency; + } else if (np) { + ret = of_get_named_gpio(np, "power-gpios", 0); + if (ret >= 0) + dac33->power_gpio = ret; + else + dac33->power_gpio = -1; + + if (of_property_read_bool(np, "ti,keep-bclk")) + dac33->keep_bclk = true; + + of_property_read_u32(np, "ti,burst-bclkdiv", &dac33->burst_bclkdiv); + } else { + dev_err(&client->dev, "Platform data not set\n"); + return -ENODEV; + } if (!dac33->mode1_latency) dac33->mode1_latency = 10000; /* 10ms */ dac33->irq = client->irq; @@ -1580,9 +1594,16 @@ static const struct i2c_device_id tlv320dac33_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, tlv320dac33_i2c_id); +static const struct of_device_id tlv320dac33_of_match[] = { + { .compatible = "ti,tlv320dac33", }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, tlv320dac33_of_match); + static struct i2c_driver tlv320dac33_i2c_driver = { .driver = { .name = "tlv320dac33-codec", + .of_match_table = of_match_ptr(tlv320dac33_of_match), }, .probe = dac33_i2c_probe, .remove = dac33_i2c_remove,