diff mbox

[v3,11/11] mmc: sdhci-omap: Add sdhci_omap specific ops for enable_sdio_irq

Message ID 20180307132020.30951-12-kishon@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Kishon Vijay Abraham I March 7, 2018, 1:20 p.m. UTC
Add sdhci_omap_enable_sdio_irq to set CTPL and CLKEXTFREE bits in
MMCHS_CON register required to detect asynchronous card interrupt
on DAT[1].

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/mmc/host/sdhci-omap.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

Comments

Adrian Hunter March 15, 2018, 2:34 p.m. UTC | #1
On 07/03/18 15:20, Kishon Vijay Abraham I wrote:
> Add sdhci_omap_enable_sdio_irq to set CTPL and CLKEXTFREE bits in
> MMCHS_CON register required to detect asynchronous card interrupt
> on DAT[1].
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
>  drivers/mmc/host/sdhci-omap.c | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> index 14dd51b51b41..8ceb3956b211 100644
> --- a/drivers/mmc/host/sdhci-omap.c
> +++ b/drivers/mmc/host/sdhci-omap.c
> @@ -36,6 +36,7 @@
>  #define CON_DDR			BIT(19)
>  #define CON_CLKEXTFREE		BIT(16)
>  #define CON_PADEN		BIT(15)
> +#define CON_CTPL		BIT(11)
>  #define CON_INIT		BIT(1)
>  #define CON_OD			BIT(0)
>  
> @@ -226,6 +227,23 @@ static void sdhci_omap_conf_bus_power(struct sdhci_omap_host *omap_host,
>  	}
>  }
>  
> +static void sdhci_omap_enable_sdio_irq(struct mmc_host *mmc, int enable)
> +{
> +	struct sdhci_host *host = mmc_priv(mmc);
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
> +	u32 reg;
> +
> +	reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
> +	if (enable)
> +		reg |= (CON_CTPL | CON_CLKEXTFREE);
> +	else
> +		reg &= ~(CON_CTPL | CON_CLKEXTFREE);
> +	sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg);
> +
> +	sdhci_enable_sdio_irq(mmc, enable);
> +}
> +
>  static inline void sdhci_omap_set_dll(struct sdhci_omap_host *omap_host,
>  				      int count)
>  {
> @@ -962,6 +980,7 @@ static int sdhci_omap_probe(struct platform_device *pdev)
>  	host->mmc_host_ops.set_ios = sdhci_omap_set_ios;
>  	host->mmc_host_ops.card_busy = sdhci_omap_card_busy;
>  	host->mmc_host_ops.execute_tuning = sdhci_omap_execute_tuning;
> +	host->mmc_host_ops.enable_sdio_irq = sdhci_omap_enable_sdio_irq;
>  
>  	ret = sdhci_setup_host(host);
>  	if (ret)
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 14dd51b51b41..8ceb3956b211 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -36,6 +36,7 @@ 
 #define CON_DDR			BIT(19)
 #define CON_CLKEXTFREE		BIT(16)
 #define CON_PADEN		BIT(15)
+#define CON_CTPL		BIT(11)
 #define CON_INIT		BIT(1)
 #define CON_OD			BIT(0)
 
@@ -226,6 +227,23 @@  static void sdhci_omap_conf_bus_power(struct sdhci_omap_host *omap_host,
 	}
 }
 
+static void sdhci_omap_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
+	u32 reg;
+
+	reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
+	if (enable)
+		reg |= (CON_CTPL | CON_CLKEXTFREE);
+	else
+		reg &= ~(CON_CTPL | CON_CLKEXTFREE);
+	sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg);
+
+	sdhci_enable_sdio_irq(mmc, enable);
+}
+
 static inline void sdhci_omap_set_dll(struct sdhci_omap_host *omap_host,
 				      int count)
 {
@@ -962,6 +980,7 @@  static int sdhci_omap_probe(struct platform_device *pdev)
 	host->mmc_host_ops.set_ios = sdhci_omap_set_ios;
 	host->mmc_host_ops.card_busy = sdhci_omap_card_busy;
 	host->mmc_host_ops.execute_tuning = sdhci_omap_execute_tuning;
+	host->mmc_host_ops.enable_sdio_irq = sdhci_omap_enable_sdio_irq;
 
 	ret = sdhci_setup_host(host);
 	if (ret)