diff mbox series

[v2] pwm: pwm-omap-dmtimer: return -EPROBE_DEFER if no dmtimer platform data

Message ID 20180726133658.23902-1-drivshin@awxrd.com (mailing list archive)
State New, archived
Headers show
Series [v2] pwm: pwm-omap-dmtimer: return -EPROBE_DEFER if no dmtimer platform data | expand

Commit Message

David Rivshin July 26, 2018, 1:36 p.m. UTC
From: David Rivshin <DRivshin@allworx.com>


If a pwm-omap-dmtimer is probed before the dmtimer it uses, the platform
data won't be set yet.

Fixes: ac30751df953 ("ARM: OMAP: pdata-quirks: Remove unused timer pdata")
Cc: <stable@vger.kernel.org> # 4.17+
Signed-off-by: David Rivshin <drivshin@allworx.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Pavel Machek <pavel@ucw.cz>
---
Changes in v2:
* Added Pavel's Acked-by/Tested-by [1]

[1] https://lkml.org/lkml/2018/7/16/346

 drivers/pwm/pwm-omap-dmtimer.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)


base-commit: d72e90f33aa4709ebecc5005562f52335e106a60

Comments

Ladislav Michl July 26, 2018, 6:54 p.m. UTC | #1
On Thu, Jul 26, 2018 at 09:36:58AM -0400, David Rivshin wrote:
> From: David Rivshin <DRivshin@allworx.com>
> 
> If a pwm-omap-dmtimer is probed before the dmtimer it uses, the platform
> data won't be set yet.
> 
> Fixes: ac30751df953 ("ARM: OMAP: pdata-quirks: Remove unused timer pdata")
> Cc: <stable@vger.kernel.org> # 4.17+
> Signed-off-by: David Rivshin <drivshin@allworx.com>
> Acked-by: Pavel Machek <pavel@ucw.cz>
> Tested-by: Pavel Machek <pavel@ucw.cz>
> ---
> Changes in v2:
> * Added Pavel's Acked-by/Tested-by [1]
> 
> [1] https://lkml.org/lkml/2018/7/16/346
> 
>  drivers/pwm/pwm-omap-dmtimer.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c
> index 665da3c8fbceb..d3d7ea7a53146 100644
> --- a/drivers/pwm/pwm-omap-dmtimer.c
> +++ b/drivers/pwm/pwm-omap-dmtimer.c
> @@ -264,8 +264,9 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
>  
>  	timer_pdata = dev_get_platdata(&timer_pdev->dev);
>  	if (!timer_pdata) {
> -		dev_err(&pdev->dev, "dmtimer pdata structure NULL\n");
> -		ret = -EINVAL;
> +		dev_info(&pdev->dev,
> +			 "dmtimer pdata structure NULL, deferring probe\n");

This seems to be a bit verbose for EPROBE_DEFER case. Could we either remove
it as it is done later in pdata->request_by_node(timer) failure case or at
least make it dev_dbg? Otherwise thank you and with mentioned change
Acked-by: Ladislav Michl <ladis@linux-mips.org>

> +		ret = -EPROBE_DEFER;
>  		goto put;
>  	}
>  
> 
> base-commit: d72e90f33aa4709ebecc5005562f52335e106a60
> -- 
> 2.17.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
David Rivshin July 26, 2018, 8:37 p.m. UTC | #2
On Thu, 26 Jul 2018 20:54:26 +0200
Ladislav Michl <ladis@linux-mips.org> wrote:

> On Thu, Jul 26, 2018 at 09:36:58AM -0400, David Rivshin wrote:
> > From: David Rivshin <DRivshin@allworx.com>
> > 
> > If a pwm-omap-dmtimer is probed before the dmtimer it uses, the platform
> > data won't be set yet.
> > 
> > Fixes: ac30751df953 ("ARM: OMAP: pdata-quirks: Remove unused timer pdata")
> > Cc: <stable@vger.kernel.org> # 4.17+
> > Signed-off-by: David Rivshin <drivshin@allworx.com>
> > Acked-by: Pavel Machek <pavel@ucw.cz>
> > Tested-by: Pavel Machek <pavel@ucw.cz>
> > ---
> > Changes in v2:
> > * Added Pavel's Acked-by/Tested-by [1]
> > 
> > [1] https://lkml.org/lkml/2018/7/16/346
> > 
> >  drivers/pwm/pwm-omap-dmtimer.c | 5 +++--
> >  1 file changed, 3 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c
> > index 665da3c8fbceb..d3d7ea7a53146 100644
> > --- a/drivers/pwm/pwm-omap-dmtimer.c
> > +++ b/drivers/pwm/pwm-omap-dmtimer.c
> > @@ -264,8 +264,9 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
> >  
> >  	timer_pdata = dev_get_platdata(&timer_pdev->dev);
> >  	if (!timer_pdata) {
> > -		dev_err(&pdev->dev, "dmtimer pdata structure NULL\n");
> > -		ret = -EINVAL;
> > +		dev_info(&pdev->dev,
> > +			 "dmtimer pdata structure NULL, deferring probe\n");  
> 
> This seems to be a bit verbose for EPROBE_DEFER case. Could we either remove
> it as it is done later in pdata->request_by_node(timer) failure case or at
> least make it dev_dbg? Otherwise thank you and with mentioned change
> Acked-by: Ladislav Michl <ladis@linux-mips.org>

Hi Ladislav, thanks for the review.

I had grepped through other drivers and found no consistent pattern. Some
places used dev_err still, others reduced to one of dev_{warn,info,dbg}, 
and others no message at all. Some messages mentioned they are deferring 
the probe, other didn't. I was already getting a couple of dev_info from 
the pinctrl core code, so I went that way. I figured the message might be
useful to someone, but I don't feel strongly.

I personally would lean to dev_dbg if you think dev_info is too harsh, 
just in case someone's board suddenly isn't working after upgrade. But 
I'm certainly willing to remove the message entirely if you feel strongly,
or anyone else cares to weigh in.


> 
> > +		ret = -EPROBE_DEFER;
> >  		goto put;
> >  	}
> >  
> > 
> > base-commit: d72e90f33aa4709ebecc5005562f52335e106a60
> > -- 
> > 2.17.1  

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Ladislav Michl July 27, 2018, 7:19 a.m. UTC | #3
On Thu, Jul 26, 2018 at 04:37:05PM -0400, David Rivshin wrote:
> On Thu, 26 Jul 2018 20:54:26 +0200
> Ladislav Michl <ladis@linux-mips.org> wrote:
> 
> > On Thu, Jul 26, 2018 at 09:36:58AM -0400, David Rivshin wrote:
> > > From: David Rivshin <DRivshin@allworx.com>
> > > 
> > > If a pwm-omap-dmtimer is probed before the dmtimer it uses, the platform
> > > data won't be set yet.
> > > 
> > > Fixes: ac30751df953 ("ARM: OMAP: pdata-quirks: Remove unused timer pdata")
> > > Cc: <stable@vger.kernel.org> # 4.17+
> > > Signed-off-by: David Rivshin <drivshin@allworx.com>
> > > Acked-by: Pavel Machek <pavel@ucw.cz>
> > > Tested-by: Pavel Machek <pavel@ucw.cz>
> > > ---
> > > Changes in v2:
> > > * Added Pavel's Acked-by/Tested-by [1]
> > > 
> > > [1] https://lkml.org/lkml/2018/7/16/346
> > > 
> > >  drivers/pwm/pwm-omap-dmtimer.c | 5 +++--
> > >  1 file changed, 3 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c
> > > index 665da3c8fbceb..d3d7ea7a53146 100644
> > > --- a/drivers/pwm/pwm-omap-dmtimer.c
> > > +++ b/drivers/pwm/pwm-omap-dmtimer.c
> > > @@ -264,8 +264,9 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
> > >  
> > >  	timer_pdata = dev_get_platdata(&timer_pdev->dev);
> > >  	if (!timer_pdata) {
> > > -		dev_err(&pdev->dev, "dmtimer pdata structure NULL\n");
> > > -		ret = -EINVAL;
> > > +		dev_info(&pdev->dev,
> > > +			 "dmtimer pdata structure NULL, deferring probe\n");  
> > 
> > This seems to be a bit verbose for EPROBE_DEFER case. Could we either remove
> > it as it is done later in pdata->request_by_node(timer) failure case or at
> > least make it dev_dbg? Otherwise thank you and with mentioned change
> > Acked-by: Ladislav Michl <ladis@linux-mips.org>
> 
> Hi Ladislav, thanks for the review.
> 
> I had grepped through other drivers and found no consistent pattern. Some
> places used dev_err still, others reduced to one of dev_{warn,info,dbg}, 
> and others no message at all. Some messages mentioned they are deferring 
> the probe, other didn't. I was already getting a couple of dev_info from 
> the pinctrl core code, so I went that way. I figured the message might be
> useful to someone, but I don't feel strongly.

Well, pinctrl probe deferal message is a bit annoying. It really does not
tell us much as long as pins are correctly configured and in case they are
not it is useless as well :)

> I personally would lean to dev_dbg if you think dev_info is too harsh, 
> just in case someone's board suddenly isn't working after upgrade. But 
> I'm certainly willing to remove the message entirely if you feel strongly,
> or anyone else cares to weigh in.

I'm fine with dev_dbg as well.

Thank you,
	ladis

> > 
> > > +		ret = -EPROBE_DEFER;
> > >  		goto put;
> > >  	}
> > >  
> > > 
> > > base-commit: d72e90f33aa4709ebecc5005562f52335e106a60
> > > -- 
> > > 2.17.1  
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Pavel Machek July 27, 2018, 11 a.m. UTC | #4
On Fri 2018-07-27 09:19:01, Ladislav Michl wrote:
> On Thu, Jul 26, 2018 at 04:37:05PM -0400, David Rivshin wrote:
> > On Thu, 26 Jul 2018 20:54:26 +0200
> > Ladislav Michl <ladis@linux-mips.org> wrote:
> > 
> > > On Thu, Jul 26, 2018 at 09:36:58AM -0400, David Rivshin wrote:
> > > > From: David Rivshin <DRivshin@allworx.com>
> > > > 
> > > > If a pwm-omap-dmtimer is probed before the dmtimer it uses, the platform
> > > > data won't be set yet.
> > > > 
> > > > Fixes: ac30751df953 ("ARM: OMAP: pdata-quirks: Remove unused timer pdata")
> > > > Cc: <stable@vger.kernel.org> # 4.17+
> > > > Signed-off-by: David Rivshin <drivshin@allworx.com>
> > > > Acked-by: Pavel Machek <pavel@ucw.cz>
> > > > Tested-by: Pavel Machek <pavel@ucw.cz>
> > > > ---
> > > > Changes in v2:
> > > > * Added Pavel's Acked-by/Tested-by [1]
> > > > 
> > > > [1] https://lkml.org/lkml/2018/7/16/346
> > > > 
> > > >  drivers/pwm/pwm-omap-dmtimer.c | 5 +++--
> > > >  1 file changed, 3 insertions(+), 2 deletions(-)
> > > > 
> > > > diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c
> > > > index 665da3c8fbceb..d3d7ea7a53146 100644
> > > > --- a/drivers/pwm/pwm-omap-dmtimer.c
> > > > +++ b/drivers/pwm/pwm-omap-dmtimer.c
> > > > @@ -264,8 +264,9 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
> > > >  
> > > >  	timer_pdata = dev_get_platdata(&timer_pdev->dev);
> > > >  	if (!timer_pdata) {
> > > > -		dev_err(&pdev->dev, "dmtimer pdata structure NULL\n");
> > > > -		ret = -EINVAL;
> > > > +		dev_info(&pdev->dev,
> > > > +			 "dmtimer pdata structure NULL, deferring probe\n");  
> > > 
> > > This seems to be a bit verbose for EPROBE_DEFER case. Could we either remove
> > > it as it is done later in pdata->request_by_node(timer) failure case or at
> > > least make it dev_dbg? Otherwise thank you and with mentioned change
> > > Acked-by: Ladislav Michl <ladis@linux-mips.org>
> > 
> > Hi Ladislav, thanks for the review.
> > 
> > I had grepped through other drivers and found no consistent pattern. Some
> > places used dev_err still, others reduced to one of dev_{warn,info,dbg}, 
> > and others no message at all. Some messages mentioned they are deferring 
> > the probe, other didn't. I was already getting a couple of dev_info from 
> > the pinctrl core code, so I went that way. I figured the message might be
> > useful to someone, but I don't feel strongly.
> 
> Well, pinctrl probe deferal message is a bit annoying. It really does not
> tell us much as long as pins are correctly configured and in case they are
> not it is useless as well :)
> 
> > I personally would lean to dev_dbg if you think dev_info is too harsh, 
> > just in case someone's board suddenly isn't working after upgrade. But 
> > I'm certainly willing to remove the message entirely if you feel strongly,
> > or anyone else cares to weigh in.
> 
> I'm fine with dev_dbg as well.

Looks good to me, too.
									Pavel
David Rivshin July 27, 2018, 1:42 p.m. UTC | #5
On Fri, 27 Jul 2018 13:00:06 +0200
Pavel Machek <pavel@ucw.cz> wrote:

> On Fri 2018-07-27 09:19:01, Ladislav Michl wrote:
> > On Thu, Jul 26, 2018 at 04:37:05PM -0400, David Rivshin wrote:  
> > > On Thu, 26 Jul 2018 20:54:26 +0200
> > > Ladislav Michl <ladis@linux-mips.org> wrote:
> > >   
> > > > On Thu, Jul 26, 2018 at 09:36:58AM -0400, David Rivshin wrote:  
> > > > > From: David Rivshin <DRivshin@allworx.com>
> > > > > 
> > > > > If a pwm-omap-dmtimer is probed before the dmtimer it uses, the platform
> > > > > data won't be set yet.
> > > > > 
> > > > > Fixes: ac30751df953 ("ARM: OMAP: pdata-quirks: Remove unused timer pdata")
> > > > > Cc: <stable@vger.kernel.org> # 4.17+
> > > > > Signed-off-by: David Rivshin <drivshin@allworx.com>
> > > > > Acked-by: Pavel Machek <pavel@ucw.cz>
> > > > > Tested-by: Pavel Machek <pavel@ucw.cz>
> > > > > ---
> > > > > Changes in v2:
> > > > > * Added Pavel's Acked-by/Tested-by [1]
> > > > > 
> > > > > [1] https://lkml.org/lkml/2018/7/16/346
> > > > > 
> > > > >  drivers/pwm/pwm-omap-dmtimer.c | 5 +++--
> > > > >  1 file changed, 3 insertions(+), 2 deletions(-)
> > > > > 
> > > > > diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c
> > > > > index 665da3c8fbceb..d3d7ea7a53146 100644
> > > > > --- a/drivers/pwm/pwm-omap-dmtimer.c
> > > > > +++ b/drivers/pwm/pwm-omap-dmtimer.c
> > > > > @@ -264,8 +264,9 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
> > > > >  
> > > > >  	timer_pdata = dev_get_platdata(&timer_pdev->dev);
> > > > >  	if (!timer_pdata) {
> > > > > -		dev_err(&pdev->dev, "dmtimer pdata structure NULL\n");
> > > > > -		ret = -EINVAL;
> > > > > +		dev_info(&pdev->dev,
> > > > > +			 "dmtimer pdata structure NULL, deferring probe\n");    
> > > > 
> > > > This seems to be a bit verbose for EPROBE_DEFER case. Could we either remove
> > > > it as it is done later in pdata->request_by_node(timer) failure case or at
> > > > least make it dev_dbg? Otherwise thank you and with mentioned change
> > > > Acked-by: Ladislav Michl <ladis@linux-mips.org>  
> > > 
> > > Hi Ladislav, thanks for the review.
> > > 
> > > I had grepped through other drivers and found no consistent pattern. Some
> > > places used dev_err still, others reduced to one of dev_{warn,info,dbg}, 
> > > and others no message at all. Some messages mentioned they are deferring 
> > > the probe, other didn't. I was already getting a couple of dev_info from 
> > > the pinctrl core code, so I went that way. I figured the message might be
> > > useful to someone, but I don't feel strongly.  
> > 
> > Well, pinctrl probe deferal message is a bit annoying. It really does not
> > tell us much as long as pins are correctly configured and in case they are
> > not it is useless as well :)
> >   
> > > I personally would lean to dev_dbg if you think dev_info is too harsh, 
> > > just in case someone's board suddenly isn't working after upgrade. But 
> > > I'm certainly willing to remove the message entirely if you feel strongly,
> > > or anyone else cares to weigh in.  
> > 
> > I'm fine with dev_dbg as well.  
> 
> Looks good to me, too.

OK, I'll spin a v3 with dev_dbg.

Pavel, I'm not sure of the normal etiquette: since I'm making a minor 
change change to the code, should I keep your Tested-by, or drop it 
until/if you test again? I assume, based on your response, that you'd
still be good with the Acked-by?


> 									Pavel

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c
index 665da3c8fbceb..d3d7ea7a53146 100644
--- a/drivers/pwm/pwm-omap-dmtimer.c
+++ b/drivers/pwm/pwm-omap-dmtimer.c
@@ -264,8 +264,9 @@  static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
 
 	timer_pdata = dev_get_platdata(&timer_pdev->dev);
 	if (!timer_pdata) {
-		dev_err(&pdev->dev, "dmtimer pdata structure NULL\n");
-		ret = -EINVAL;
+		dev_info(&pdev->dev,
+			 "dmtimer pdata structure NULL, deferring probe\n");
+		ret = -EPROBE_DEFER;
 		goto put;
 	}