@@ -58,6 +58,7 @@ obj-$(CONFIG_MTD_NAND_MTK) += mtk_ecc.o mtk_nand.o
obj-$(CONFIG_MTD_NAND_TEGRA) += tegra_nand.o
nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
+nand-objs += nand_onfi.o
nand-objs += nand_amd.o
nand-objs += nand_hynix.o
nand-objs += nand_macronix.o
@@ -88,8 +88,11 @@ int nand_read_page_raw_notsupp(struct nand_chip *chip, u8 *buf,
int nand_write_page_raw_notsupp(struct nand_chip *chip, const u8 *buf,
int oob_required, int page);
int nand_exit_status_op(struct nand_chip *chip);
+int nand_read_param_page_op(struct nand_chip *chip, u8 page, void *buf,
+ unsigned int len);
void nand_decode_ext_id(struct nand_chip *chip);
void panic_nand_wait(struct nand_chip *chip, unsigned long timeo);
+void sanitize_string(uint8_t *s, size_t len);
/* BBT functions */
int nand_markbad_bbt(struct nand_chip *chip, loff_t offs);
@@ -101,4 +104,8 @@ void nand_legacy_set_defaults(struct nand_chip *chip);
void nand_legacy_adjust_cmdfunc(struct nand_chip *chip);
int nand_legacy_check_hooks(struct nand_chip *chip);
+/* ONFI functions */
+u16 onfi_crc16(u16 crc, u8 const *p, size_t len);
+int nand_onfi_detect(struct nand_chip *chip);
+
#endif /* __LINUX_RAWNAND_INTERNALS */
@@ -986,8 +986,8 @@ EXPORT_SYMBOL_GPL(nand_read_page_op);
*
* Returns 0 on success, a negative error code otherwise.
*/
-static int nand_read_param_page_op(struct nand_chip *chip, u8 page, void *buf,
- unsigned int len)
+int nand_read_param_page_op(struct nand_chip *chip, u8 page, void *buf,
+ unsigned int len)
{
unsigned int i;
u8 *p = buf;
@@ -4370,7 +4370,7 @@ static void nand_set_defaults(struct nand_chip *chip)
}
/* Sanitize ONFI strings so we can safely print them */
-static void sanitize_string(uint8_t *s, size_t len)
+void sanitize_string(uint8_t *s, size_t len)
{
ssize_t i;
@@ -4387,294 +4387,6 @@ static void sanitize_string(uint8_t *s, size_t len)
strim(s);
}
-static u16 onfi_crc16(u16 crc, u8 const *p, size_t len)
-{
- int i;
- while (len--) {
- crc ^= *p++ << 8;
- for (i = 0; i < 8; i++)
- crc = (crc << 1) ^ ((crc & 0x8000) ? 0x8005 : 0);
- }
-
- return crc;
-}
-
-/* Parse the Extended Parameter Page. */
-static int nand_flash_detect_ext_param_page(struct nand_chip *chip,
- struct nand_onfi_params *p)
-{
- struct onfi_ext_param_page *ep;
- struct onfi_ext_section *s;
- struct onfi_ext_ecc_info *ecc;
- uint8_t *cursor;
- int ret;
- int len;
- int i;
-
- len = le16_to_cpu(p->ext_param_page_length) * 16;
- ep = kmalloc(len, GFP_KERNEL);
- if (!ep)
- return -ENOMEM;
-
- /* Send our own NAND_CMD_PARAM. */
- ret = nand_read_param_page_op(chip, 0, NULL, 0);
- if (ret)
- goto ext_out;
-
- /* Use the Change Read Column command to skip the ONFI param pages. */
- ret = nand_change_read_column_op(chip,
- sizeof(*p) * p->num_of_param_pages,
- ep, len, true);
- if (ret)
- goto ext_out;
-
- ret = -EINVAL;
- if ((onfi_crc16(ONFI_CRC_BASE, ((uint8_t *)ep) + 2, len - 2)
- != le16_to_cpu(ep->crc))) {
- pr_debug("fail in the CRC.\n");
- goto ext_out;
- }
-
- /*
- * Check the signature.
- * Do not strictly follow the ONFI spec, maybe changed in future.
- */
- if (strncmp(ep->sig, "EPPS", 4)) {
- pr_debug("The signature is invalid.\n");
- goto ext_out;
- }
-
- /* find the ECC section. */
- cursor = (uint8_t *)(ep + 1);
- for (i = 0; i < ONFI_EXT_SECTION_MAX; i++) {
- s = ep->sections + i;
- if (s->type == ONFI_SECTION_TYPE_2)
- break;
- cursor += s->length * 16;
- }
- if (i == ONFI_EXT_SECTION_MAX) {
- pr_debug("We can not find the ECC section.\n");
- goto ext_out;
- }
-
- /* get the info we want. */
- ecc = (struct onfi_ext_ecc_info *)cursor;
-
- if (!ecc->codeword_size) {
- pr_debug("Invalid codeword size\n");
- goto ext_out;
- }
-
- chip->ecc_strength_ds = ecc->ecc_bits;
- chip->ecc_step_ds = 1 << ecc->codeword_size;
- ret = 0;
-
-ext_out:
- kfree(ep);
- return ret;
-}
-
-/*
- * Recover data with bit-wise majority
- */
-static void nand_bit_wise_majority(const void **srcbufs,
- unsigned int nsrcbufs,
- void *dstbuf,
- unsigned int bufsize)
-{
- int i, j, k;
-
- for (i = 0; i < bufsize; i++) {
- u8 val = 0;
-
- for (j = 0; j < 8; j++) {
- unsigned int cnt = 0;
-
- for (k = 0; k < nsrcbufs; k++) {
- const u8 *srcbuf = srcbufs[k];
-
- if (srcbuf[i] & BIT(j))
- cnt++;
- }
-
- if (cnt > nsrcbufs / 2)
- val |= BIT(j);
- }
-
- ((u8 *)dstbuf)[i] = val;
- }
-}
-
-/*
- * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise.
- */
-static int nand_flash_detect_onfi(struct nand_chip *chip)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct nand_onfi_params *p;
- struct onfi_params *onfi;
- int onfi_version = 0;
- char id[4];
- int i, ret, val;
-
- /* Try ONFI for unknown chip or LP */
- ret = nand_readid_op(chip, 0x20, id, sizeof(id));
- if (ret || strncmp(id, "ONFI", 4))
- return 0;
-
- /* ONFI chip: allocate a buffer to hold its parameter page */
- p = kzalloc((sizeof(*p) * 3), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
-
- ret = nand_read_param_page_op(chip, 0, NULL, 0);
- if (ret) {
- ret = 0;
- goto free_onfi_param_page;
- }
-
- for (i = 0; i < 3; i++) {
- ret = nand_read_data_op(chip, &p[i], sizeof(*p), true);
- if (ret) {
- ret = 0;
- goto free_onfi_param_page;
- }
-
- if (onfi_crc16(ONFI_CRC_BASE, (u8 *)&p[i], 254) ==
- le16_to_cpu(p->crc)) {
- if (i)
- memcpy(p, &p[i], sizeof(*p));
- break;
- }
- }
-
- if (i == 3) {
- const void *srcbufs[3] = {p, p + 1, p + 2};
-
- pr_warn("Could not find a valid ONFI parameter page, trying bit-wise majority to recover it\n");
- nand_bit_wise_majority(srcbufs, ARRAY_SIZE(srcbufs), p,
- sizeof(*p));
-
- if (onfi_crc16(ONFI_CRC_BASE, (u8 *)p, 254) !=
- le16_to_cpu(p->crc)) {
- pr_err("ONFI parameter recovery failed, aborting\n");
- goto free_onfi_param_page;
- }
- }
-
- if (chip->manufacturer.desc && chip->manufacturer.desc->ops &&
- chip->manufacturer.desc->ops->fixup_onfi_param_page)
- chip->manufacturer.desc->ops->fixup_onfi_param_page(chip, p);
-
- /* Check version */
- val = le16_to_cpu(p->revision);
- if (val & ONFI_VERSION_2_3)
- onfi_version = 23;
- else if (val & ONFI_VERSION_2_2)
- onfi_version = 22;
- else if (val & ONFI_VERSION_2_1)
- onfi_version = 21;
- else if (val & ONFI_VERSION_2_0)
- onfi_version = 20;
- else if (val & ONFI_VERSION_1_0)
- onfi_version = 10;
-
- if (!onfi_version) {
- pr_info("unsupported ONFI version: %d\n", val);
- goto free_onfi_param_page;
- }
-
- sanitize_string(p->manufacturer, sizeof(p->manufacturer));
- sanitize_string(p->model, sizeof(p->model));
- chip->parameters.model = kstrdup(p->model, GFP_KERNEL);
- if (!chip->parameters.model) {
- ret = -ENOMEM;
- goto free_onfi_param_page;
- }
-
- mtd->writesize = le32_to_cpu(p->byte_per_page);
-
- /*
- * pages_per_block and blocks_per_lun may not be a power-of-2 size
- * (don't ask me who thought of this...). MTD assumes that these
- * dimensions will be power-of-2, so just truncate the remaining area.
- */
- mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1);
- mtd->erasesize *= mtd->writesize;
-
- mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
-
- /* See erasesize comment */
- chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1);
- chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
- chip->bits_per_cell = p->bits_per_cell;
-
- chip->max_bb_per_die = le16_to_cpu(p->bb_per_lun);
- chip->blocks_per_die = le32_to_cpu(p->blocks_per_lun);
-
- if (le16_to_cpu(p->features) & ONFI_FEATURE_16_BIT_BUS)
- chip->options |= NAND_BUSWIDTH_16;
-
- if (p->ecc_bits != 0xff) {
- chip->ecc_strength_ds = p->ecc_bits;
- chip->ecc_step_ds = 512;
- } else if (onfi_version >= 21 &&
- (le16_to_cpu(p->features) & ONFI_FEATURE_EXT_PARAM_PAGE)) {
-
- /*
- * The nand_flash_detect_ext_param_page() uses the
- * Change Read Column command which maybe not supported
- * by the chip->legacy.cmdfunc. So try to update the
- * chip->legacy.cmdfunc now. We do not replace user supplied
- * command function.
- */
- nand_legacy_adjust_cmdfunc(chip);
-
- /* The Extended Parameter Page is supported since ONFI 2.1. */
- if (nand_flash_detect_ext_param_page(chip, p))
- pr_warn("Failed to detect ONFI extended param page\n");
- } else {
- pr_warn("Could not retrieve ONFI ECC requirements\n");
- }
-
- /* Save some parameters from the parameter page for future use */
- if (le16_to_cpu(p->opt_cmd) & ONFI_OPT_CMD_SET_GET_FEATURES) {
- chip->parameters.supports_set_get_features = true;
- bitmap_set(chip->parameters.get_feature_list,
- ONFI_FEATURE_ADDR_TIMING_MODE, 1);
- bitmap_set(chip->parameters.set_feature_list,
- ONFI_FEATURE_ADDR_TIMING_MODE, 1);
- }
-
- onfi = kzalloc(sizeof(*onfi), GFP_KERNEL);
- if (!onfi) {
- ret = -ENOMEM;
- goto free_model;
- }
-
- onfi->version = onfi_version;
- onfi->tPROG = le16_to_cpu(p->t_prog);
- onfi->tBERS = le16_to_cpu(p->t_bers);
- onfi->tR = le16_to_cpu(p->t_r);
- onfi->tCCS = le16_to_cpu(p->t_ccs);
- onfi->async_timing_mode = le16_to_cpu(p->async_timing_mode);
- onfi->vendor_revision = le16_to_cpu(p->vendor_revision);
- memcpy(onfi->vendor, p->vendor, sizeof(p->vendor));
- chip->parameters.onfi = onfi;
-
- /* Identification done, free the full ONFI parameter page and exit */
- kfree(p);
-
- return 1;
-
-free_model:
- kfree(chip->parameters.model);
-free_onfi_param_page:
- kfree(p);
-
- return ret;
-}
-
/*
* Check if the NAND chip is JEDEC compliant, returns 1 if it is, 0 otherwise.
*/
@@ -5076,7 +4788,7 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
if (!type->name || !type->pagesize) {
/* Check if the chip is ONFI compliant */
- ret = nand_flash_detect_onfi(chip);
+ ret = nand_onfi_detect(chip);
if (ret < 0)
return ret;
else if (ret)
new file mode 100644
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ * 2002-2006 Thomas Gleixner (tglx@linutronix.de)
+ *
+ * Credits:
+ * David Woodhouse for adding multichip support
+ *
+ * Aleph One Ltd. and Toby Churchill Ltd. for supporting the
+ * rework for 2K page size chips
+ *
+ * This file contains all ONFI helpers.
+ */
+
+#include <linux/slab.h>
+
+#include "internals.h"
+
+u16 onfi_crc16(u16 crc, u8 const *p, size_t len)
+{
+ int i;
+ while (len--) {
+ crc ^= *p++ << 8;
+ for (i = 0; i < 8; i++)
+ crc = (crc << 1) ^ ((crc & 0x8000) ? 0x8005 : 0);
+ }
+
+ return crc;
+}
+
+/* Parse the Extended Parameter Page. */
+static int nand_flash_detect_ext_param_page(struct nand_chip *chip,
+ struct nand_onfi_params *p)
+{
+ struct onfi_ext_param_page *ep;
+ struct onfi_ext_section *s;
+ struct onfi_ext_ecc_info *ecc;
+ uint8_t *cursor;
+ int ret;
+ int len;
+ int i;
+
+ len = le16_to_cpu(p->ext_param_page_length) * 16;
+ ep = kmalloc(len, GFP_KERNEL);
+ if (!ep)
+ return -ENOMEM;
+
+ /* Send our own NAND_CMD_PARAM. */
+ ret = nand_read_param_page_op(chip, 0, NULL, 0);
+ if (ret)
+ goto ext_out;
+
+ /* Use the Change Read Column command to skip the ONFI param pages. */
+ ret = nand_change_read_column_op(chip,
+ sizeof(*p) * p->num_of_param_pages,
+ ep, len, true);
+ if (ret)
+ goto ext_out;
+
+ ret = -EINVAL;
+ if ((onfi_crc16(ONFI_CRC_BASE, ((uint8_t *)ep) + 2, len - 2)
+ != le16_to_cpu(ep->crc))) {
+ pr_debug("fail in the CRC.\n");
+ goto ext_out;
+ }
+
+ /*
+ * Check the signature.
+ * Do not strictly follow the ONFI spec, maybe changed in future.
+ */
+ if (strncmp(ep->sig, "EPPS", 4)) {
+ pr_debug("The signature is invalid.\n");
+ goto ext_out;
+ }
+
+ /* find the ECC section. */
+ cursor = (uint8_t *)(ep + 1);
+ for (i = 0; i < ONFI_EXT_SECTION_MAX; i++) {
+ s = ep->sections + i;
+ if (s->type == ONFI_SECTION_TYPE_2)
+ break;
+ cursor += s->length * 16;
+ }
+ if (i == ONFI_EXT_SECTION_MAX) {
+ pr_debug("We can not find the ECC section.\n");
+ goto ext_out;
+ }
+
+ /* get the info we want. */
+ ecc = (struct onfi_ext_ecc_info *)cursor;
+
+ if (!ecc->codeword_size) {
+ pr_debug("Invalid codeword size\n");
+ goto ext_out;
+ }
+
+ chip->ecc_strength_ds = ecc->ecc_bits;
+ chip->ecc_step_ds = 1 << ecc->codeword_size;
+ ret = 0;
+
+ext_out:
+ kfree(ep);
+ return ret;
+}
+
+/*
+ * Recover data with bit-wise majority
+ */
+static void nand_bit_wise_majority(const void **srcbufs,
+ unsigned int nsrcbufs,
+ void *dstbuf,
+ unsigned int bufsize)
+{
+ int i, j, k;
+
+ for (i = 0; i < bufsize; i++) {
+ u8 val = 0;
+
+ for (j = 0; j < 8; j++) {
+ unsigned int cnt = 0;
+
+ for (k = 0; k < nsrcbufs; k++) {
+ const u8 *srcbuf = srcbufs[k];
+
+ if (srcbuf[i] & BIT(j))
+ cnt++;
+ }
+
+ if (cnt > nsrcbufs / 2)
+ val |= BIT(j);
+ }
+
+ ((u8 *)dstbuf)[i] = val;
+ }
+}
+
+/*
+ * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise.
+ */
+int nand_onfi_detect(struct nand_chip *chip)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_onfi_params *p;
+ struct onfi_params *onfi;
+ int onfi_version = 0;
+ char id[4];
+ int i, ret, val;
+
+ /* Try ONFI for unknown chip or LP */
+ ret = nand_readid_op(chip, 0x20, id, sizeof(id));
+ if (ret || strncmp(id, "ONFI", 4))
+ return 0;
+
+ /* ONFI chip: allocate a buffer to hold its parameter page */
+ p = kzalloc((sizeof(*p) * 3), GFP_KERNEL);
+ if (!p)
+ return -ENOMEM;
+
+ ret = nand_read_param_page_op(chip, 0, NULL, 0);
+ if (ret) {
+ ret = 0;
+ goto free_onfi_param_page;
+ }
+
+ for (i = 0; i < 3; i++) {
+ ret = nand_read_data_op(chip, &p[i], sizeof(*p), true);
+ if (ret) {
+ ret = 0;
+ goto free_onfi_param_page;
+ }
+
+ if (onfi_crc16(ONFI_CRC_BASE, (u8 *)&p[i], 254) ==
+ le16_to_cpu(p->crc)) {
+ if (i)
+ memcpy(p, &p[i], sizeof(*p));
+ break;
+ }
+ }
+
+ if (i == 3) {
+ const void *srcbufs[3] = {p, p + 1, p + 2};
+
+ pr_warn("Could not find a valid ONFI parameter page, trying bit-wise majority to recover it\n");
+ nand_bit_wise_majority(srcbufs, ARRAY_SIZE(srcbufs), p,
+ sizeof(*p));
+
+ if (onfi_crc16(ONFI_CRC_BASE, (u8 *)p, 254) !=
+ le16_to_cpu(p->crc)) {
+ pr_err("ONFI parameter recovery failed, aborting\n");
+ goto free_onfi_param_page;
+ }
+ }
+
+ if (chip->manufacturer.desc && chip->manufacturer.desc->ops &&
+ chip->manufacturer.desc->ops->fixup_onfi_param_page)
+ chip->manufacturer.desc->ops->fixup_onfi_param_page(chip, p);
+
+ /* Check version */
+ val = le16_to_cpu(p->revision);
+ if (val & ONFI_VERSION_2_3)
+ onfi_version = 23;
+ else if (val & ONFI_VERSION_2_2)
+ onfi_version = 22;
+ else if (val & ONFI_VERSION_2_1)
+ onfi_version = 21;
+ else if (val & ONFI_VERSION_2_0)
+ onfi_version = 20;
+ else if (val & ONFI_VERSION_1_0)
+ onfi_version = 10;
+
+ if (!onfi_version) {
+ pr_info("unsupported ONFI version: %d\n", val);
+ goto free_onfi_param_page;
+ }
+
+ sanitize_string(p->manufacturer, sizeof(p->manufacturer));
+ sanitize_string(p->model, sizeof(p->model));
+ chip->parameters.model = kstrdup(p->model, GFP_KERNEL);
+ if (!chip->parameters.model) {
+ ret = -ENOMEM;
+ goto free_onfi_param_page;
+ }
+
+ mtd->writesize = le32_to_cpu(p->byte_per_page);
+
+ /*
+ * pages_per_block and blocks_per_lun may not be a power-of-2 size
+ * (don't ask me who thought of this...). MTD assumes that these
+ * dimensions will be power-of-2, so just truncate the remaining area.
+ */
+ mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1);
+ mtd->erasesize *= mtd->writesize;
+
+ mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+
+ /* See erasesize comment */
+ chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1);
+ chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
+ chip->bits_per_cell = p->bits_per_cell;
+
+ chip->max_bb_per_die = le16_to_cpu(p->bb_per_lun);
+ chip->blocks_per_die = le32_to_cpu(p->blocks_per_lun);
+
+ if (le16_to_cpu(p->features) & ONFI_FEATURE_16_BIT_BUS)
+ chip->options |= NAND_BUSWIDTH_16;
+
+ if (p->ecc_bits != 0xff) {
+ chip->ecc_strength_ds = p->ecc_bits;
+ chip->ecc_step_ds = 512;
+ } else if (onfi_version >= 21 &&
+ (le16_to_cpu(p->features) & ONFI_FEATURE_EXT_PARAM_PAGE)) {
+
+ /*
+ * The nand_flash_detect_ext_param_page() uses the
+ * Change Read Column command which maybe not supported
+ * by the chip->legacy.cmdfunc. So try to update the
+ * chip->legacy.cmdfunc now. We do not replace user supplied
+ * command function.
+ */
+ nand_legacy_adjust_cmdfunc(chip);
+
+ /* The Extended Parameter Page is supported since ONFI 2.1. */
+ if (nand_flash_detect_ext_param_page(chip, p))
+ pr_warn("Failed to detect ONFI extended param page\n");
+ } else {
+ pr_warn("Could not retrieve ONFI ECC requirements\n");
+ }
+
+ /* Save some parameters from the parameter page for future use */
+ if (le16_to_cpu(p->opt_cmd) & ONFI_OPT_CMD_SET_GET_FEATURES) {
+ chip->parameters.supports_set_get_features = true;
+ bitmap_set(chip->parameters.get_feature_list,
+ ONFI_FEATURE_ADDR_TIMING_MODE, 1);
+ bitmap_set(chip->parameters.set_feature_list,
+ ONFI_FEATURE_ADDR_TIMING_MODE, 1);
+ }
+
+ onfi = kzalloc(sizeof(*onfi), GFP_KERNEL);
+ if (!onfi) {
+ ret = -ENOMEM;
+ goto free_model;
+ }
+
+ onfi->version = onfi_version;
+ onfi->tPROG = le16_to_cpu(p->t_prog);
+ onfi->tBERS = le16_to_cpu(p->t_bers);
+ onfi->tR = le16_to_cpu(p->t_r);
+ onfi->tCCS = le16_to_cpu(p->t_ccs);
+ onfi->async_timing_mode = le16_to_cpu(p->async_timing_mode);
+ onfi->vendor_revision = le16_to_cpu(p->vendor_revision);
+ memcpy(onfi->vendor, p->vendor, sizeof(p->vendor));
+ chip->parameters.onfi = onfi;
+
+ /* Identification done, free the full ONFI parameter page and exit */
+ kfree(p);
+
+ return 1;
+
+free_model:
+ kfree(chip->parameters.model);
+free_onfi_param_page:
+ kfree(p);
+
+ return ret;
+}
new file mode 100644
@@ -0,0 +1,178 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
+ * Steven J. Hill <sjhill@realitydiluted.com>
+ * Thomas Gleixner <tglx@linutronix.de>
+ *
+ * Contains all ONFI related definitions
+ */
+
+#ifndef __LINUX_MTD_ONFI_H
+#define __LINUX_MTD_ONFI_H
+
+#include <linux/types.h>
+
+/* ONFI version bits */
+#define ONFI_VERSION_1_0 BIT(1)
+#define ONFI_VERSION_2_0 BIT(2)
+#define ONFI_VERSION_2_1 BIT(3)
+#define ONFI_VERSION_2_2 BIT(4)
+#define ONFI_VERSION_2_3 BIT(5)
+#define ONFI_VERSION_3_0 BIT(6)
+#define ONFI_VERSION_3_1 BIT(7)
+#define ONFI_VERSION_3_2 BIT(8)
+#define ONFI_VERSION_4_0 BIT(9)
+
+/* ONFI features */
+#define ONFI_FEATURE_16_BIT_BUS (1 << 0)
+#define ONFI_FEATURE_EXT_PARAM_PAGE (1 << 7)
+
+/* ONFI timing mode, used in both asynchronous and synchronous mode */
+#define ONFI_TIMING_MODE_0 (1 << 0)
+#define ONFI_TIMING_MODE_1 (1 << 1)
+#define ONFI_TIMING_MODE_2 (1 << 2)
+#define ONFI_TIMING_MODE_3 (1 << 3)
+#define ONFI_TIMING_MODE_4 (1 << 4)
+#define ONFI_TIMING_MODE_5 (1 << 5)
+#define ONFI_TIMING_MODE_UNKNOWN (1 << 6)
+
+/* ONFI feature number/address */
+#define ONFI_FEATURE_NUMBER 256
+#define ONFI_FEATURE_ADDR_TIMING_MODE 0x1
+
+/* Vendor-specific feature address (Micron) */
+#define ONFI_FEATURE_ADDR_READ_RETRY 0x89
+#define ONFI_FEATURE_ON_DIE_ECC 0x90
+#define ONFI_FEATURE_ON_DIE_ECC_EN BIT(3)
+
+/* ONFI subfeature parameters length */
+#define ONFI_SUBFEATURE_PARAM_LEN 4
+
+/* ONFI optional commands SET/GET FEATURES supported? */
+#define ONFI_OPT_CMD_SET_GET_FEATURES (1 << 2)
+
+struct nand_onfi_params {
+ /* rev info and features block */
+ /* 'O' 'N' 'F' 'I' */
+ u8 sig[4];
+ __le16 revision;
+ __le16 features;
+ __le16 opt_cmd;
+ u8 reserved0[2];
+ __le16 ext_param_page_length; /* since ONFI 2.1 */
+ u8 num_of_param_pages; /* since ONFI 2.1 */
+ u8 reserved1[17];
+
+ /* manufacturer information block */
+ char manufacturer[12];
+ char model[20];
+ u8 jedec_id;
+ __le16 date_code;
+ u8 reserved2[13];
+
+ /* memory organization block */
+ __le32 byte_per_page;
+ __le16 spare_bytes_per_page;
+ __le32 data_bytes_per_ppage;
+ __le16 spare_bytes_per_ppage;
+ __le32 pages_per_block;
+ __le32 blocks_per_lun;
+ u8 lun_count;
+ u8 addr_cycles;
+ u8 bits_per_cell;
+ __le16 bb_per_lun;
+ __le16 block_endurance;
+ u8 guaranteed_good_blocks;
+ __le16 guaranteed_block_endurance;
+ u8 programs_per_page;
+ u8 ppage_attr;
+ u8 ecc_bits;
+ u8 interleaved_bits;
+ u8 interleaved_ops;
+ u8 reserved3[13];
+
+ /* electrical parameter block */
+ u8 io_pin_capacitance_max;
+ __le16 async_timing_mode;
+ __le16 program_cache_timing_mode;
+ __le16 t_prog;
+ __le16 t_bers;
+ __le16 t_r;
+ __le16 t_ccs;
+ __le16 src_sync_timing_mode;
+ u8 src_ssync_features;
+ __le16 clk_pin_capacitance_typ;
+ __le16 io_pin_capacitance_typ;
+ __le16 input_pin_capacitance_typ;
+ u8 input_pin_capacitance_max;
+ u8 driver_strength_support;
+ __le16 t_int_r;
+ __le16 t_adl;
+ u8 reserved4[8];
+
+ /* vendor */
+ __le16 vendor_revision;
+ u8 vendor[88];
+
+ __le16 crc;
+} __packed;
+
+#define ONFI_CRC_BASE 0x4F4E
+
+/* Extended ECC information Block Definition (since ONFI 2.1) */
+struct onfi_ext_ecc_info {
+ u8 ecc_bits;
+ u8 codeword_size;
+ __le16 bb_per_lun;
+ __le16 block_endurance;
+ u8 reserved[2];
+} __packed;
+
+#define ONFI_SECTION_TYPE_0 0 /* Unused section. */
+#define ONFI_SECTION_TYPE_1 1 /* for additional sections. */
+#define ONFI_SECTION_TYPE_2 2 /* for ECC information. */
+struct onfi_ext_section {
+ u8 type;
+ u8 length;
+} __packed;
+
+#define ONFI_EXT_SECTION_MAX 8
+
+/* Extended Parameter Page Definition (since ONFI 2.1) */
+struct onfi_ext_param_page {
+ __le16 crc;
+ u8 sig[4]; /* 'E' 'P' 'P' 'S' */
+ u8 reserved0[10];
+ struct onfi_ext_section sections[ONFI_EXT_SECTION_MAX];
+
+ /*
+ * The actual size of the Extended Parameter Page is in
+ * @ext_param_page_length of nand_onfi_params{}.
+ * The following are the variable length sections.
+ * So we do not add any fields below. Please see the ONFI spec.
+ */
+} __packed;
+
+/**
+ * struct onfi_params - ONFI specific parameters that will be reused
+ * @version: ONFI version (BCD encoded), 0 if ONFI is not supported
+ * @tPROG: Page program time
+ * @tBERS: Block erase time
+ * @tR: Page read time
+ * @tCCS: Change column setup time
+ * @async_timing_mode: Supported asynchronous timing mode
+ * @vendor_revision: Vendor specific revision number
+ * @vendor: Vendor specific data
+ */
+struct onfi_params {
+ int version;
+ u16 tPROG;
+ u16 tBERS;
+ u16 tR;
+ u16 tCCS;
+ u16 async_timing_mode;
+ u16 vendor_revision;
+ u8 vendor[88];
+};
+
+#endif /* __LINUX_MTD_ONFI_H */
@@ -21,6 +21,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/flashchip.h>
#include <linux/mtd/bbm.h>
+#include <linux/mtd/onfi.h>
#include <linux/of.h>
#include <linux/types.h>
@@ -204,147 +205,6 @@ enum nand_ecc_algo {
#define NAND_CI_CELLTYPE_MSK 0x0C
#define NAND_CI_CELLTYPE_SHIFT 2
-/* ONFI version bits */
-#define ONFI_VERSION_1_0 BIT(1)
-#define ONFI_VERSION_2_0 BIT(2)
-#define ONFI_VERSION_2_1 BIT(3)
-#define ONFI_VERSION_2_2 BIT(4)
-#define ONFI_VERSION_2_3 BIT(5)
-#define ONFI_VERSION_3_0 BIT(6)
-#define ONFI_VERSION_3_1 BIT(7)
-#define ONFI_VERSION_3_2 BIT(8)
-#define ONFI_VERSION_4_0 BIT(9)
-
-/* ONFI features */
-#define ONFI_FEATURE_16_BIT_BUS (1 << 0)
-#define ONFI_FEATURE_EXT_PARAM_PAGE (1 << 7)
-
-/* ONFI timing mode, used in both asynchronous and synchronous mode */
-#define ONFI_TIMING_MODE_0 (1 << 0)
-#define ONFI_TIMING_MODE_1 (1 << 1)
-#define ONFI_TIMING_MODE_2 (1 << 2)
-#define ONFI_TIMING_MODE_3 (1 << 3)
-#define ONFI_TIMING_MODE_4 (1 << 4)
-#define ONFI_TIMING_MODE_5 (1 << 5)
-#define ONFI_TIMING_MODE_UNKNOWN (1 << 6)
-
-/* ONFI feature number/address */
-#define ONFI_FEATURE_NUMBER 256
-#define ONFI_FEATURE_ADDR_TIMING_MODE 0x1
-
-/* Vendor-specific feature address (Micron) */
-#define ONFI_FEATURE_ADDR_READ_RETRY 0x89
-#define ONFI_FEATURE_ON_DIE_ECC 0x90
-#define ONFI_FEATURE_ON_DIE_ECC_EN BIT(3)
-
-/* ONFI subfeature parameters length */
-#define ONFI_SUBFEATURE_PARAM_LEN 4
-
-/* ONFI optional commands SET/GET FEATURES supported? */
-#define ONFI_OPT_CMD_SET_GET_FEATURES (1 << 2)
-
-struct nand_onfi_params {
- /* rev info and features block */
- /* 'O' 'N' 'F' 'I' */
- u8 sig[4];
- __le16 revision;
- __le16 features;
- __le16 opt_cmd;
- u8 reserved0[2];
- __le16 ext_param_page_length; /* since ONFI 2.1 */
- u8 num_of_param_pages; /* since ONFI 2.1 */
- u8 reserved1[17];
-
- /* manufacturer information block */
- char manufacturer[12];
- char model[20];
- u8 jedec_id;
- __le16 date_code;
- u8 reserved2[13];
-
- /* memory organization block */
- __le32 byte_per_page;
- __le16 spare_bytes_per_page;
- __le32 data_bytes_per_ppage;
- __le16 spare_bytes_per_ppage;
- __le32 pages_per_block;
- __le32 blocks_per_lun;
- u8 lun_count;
- u8 addr_cycles;
- u8 bits_per_cell;
- __le16 bb_per_lun;
- __le16 block_endurance;
- u8 guaranteed_good_blocks;
- __le16 guaranteed_block_endurance;
- u8 programs_per_page;
- u8 ppage_attr;
- u8 ecc_bits;
- u8 interleaved_bits;
- u8 interleaved_ops;
- u8 reserved3[13];
-
- /* electrical parameter block */
- u8 io_pin_capacitance_max;
- __le16 async_timing_mode;
- __le16 program_cache_timing_mode;
- __le16 t_prog;
- __le16 t_bers;
- __le16 t_r;
- __le16 t_ccs;
- __le16 src_sync_timing_mode;
- u8 src_ssync_features;
- __le16 clk_pin_capacitance_typ;
- __le16 io_pin_capacitance_typ;
- __le16 input_pin_capacitance_typ;
- u8 input_pin_capacitance_max;
- u8 driver_strength_support;
- __le16 t_int_r;
- __le16 t_adl;
- u8 reserved4[8];
-
- /* vendor */
- __le16 vendor_revision;
- u8 vendor[88];
-
- __le16 crc;
-} __packed;
-
-#define ONFI_CRC_BASE 0x4F4E
-
-/* Extended ECC information Block Definition (since ONFI 2.1) */
-struct onfi_ext_ecc_info {
- u8 ecc_bits;
- u8 codeword_size;
- __le16 bb_per_lun;
- __le16 block_endurance;
- u8 reserved[2];
-} __packed;
-
-#define ONFI_SECTION_TYPE_0 0 /* Unused section. */
-#define ONFI_SECTION_TYPE_1 1 /* for additional sections. */
-#define ONFI_SECTION_TYPE_2 2 /* for ECC information. */
-struct onfi_ext_section {
- u8 type;
- u8 length;
-} __packed;
-
-#define ONFI_EXT_SECTION_MAX 8
-
-/* Extended Parameter Page Definition (since ONFI 2.1) */
-struct onfi_ext_param_page {
- __le16 crc;
- u8 sig[4]; /* 'E' 'P' 'P' 'S' */
- u8 reserved0[10];
- struct onfi_ext_section sections[ONFI_EXT_SECTION_MAX];
-
- /*
- * The actual size of the Extended Parameter Page is in
- * @ext_param_page_length of nand_onfi_params{}.
- * The following are the variable length sections.
- * So we do not add any fields below. Please see the ONFI spec.
- */
-} __packed;
-
struct jedec_ecc_info {
u8 ecc_bits;
u8 codeword_size;
@@ -423,28 +283,6 @@ struct nand_jedec_params {
__le16 crc;
} __packed;
-/**
- * struct onfi_params - ONFI specific parameters that will be reused
- * @version: ONFI version (BCD encoded), 0 if ONFI is not supported
- * @tPROG: Page program time
- * @tBERS: Block erase time
- * @tR: Page read time
- * @tCCS: Change column setup time
- * @async_timing_mode: Supported asynchronous timing mode
- * @vendor_revision: Vendor specific revision number
- * @vendor: Vendor specific data
- */
-struct onfi_params {
- int version;
- u16 tPROG;
- u16 tBERS;
- u16 tR;
- u16 tCCS;
- u16 async_timing_mode;
- u16 vendor_revision;
- u8 vendor[88];
-};
-
/**
* struct nand_parameters - NAND generic parameters from the parameter page
* @model: Model name
This moves ONFI related code to nand_onfi.c and ONFI related struct/macros to include/linux/mtd/onfi.h. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> --- drivers/mtd/nand/raw/Makefile | 1 + drivers/mtd/nand/raw/internals.h | 7 + drivers/mtd/nand/raw/nand_base.c | 296 +------------------------------------ drivers/mtd/nand/raw/nand_onfi.c | 305 +++++++++++++++++++++++++++++++++++++++ include/linux/mtd/onfi.h | 178 +++++++++++++++++++++++ include/linux/mtd/rawnand.h | 164 +-------------------- 6 files changed, 496 insertions(+), 455 deletions(-) create mode 100644 drivers/mtd/nand/raw/nand_onfi.c create mode 100644 include/linux/mtd/onfi.h