@@ -503,7 +503,6 @@ config ARCH_OMAP1
select GPIOLIB
select HAVE_IDE
select IRQ_DOMAIN
- select NEED_MACH_MEMORY_H
select SPARSE_IRQ
help
Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
@@ -15,11 +15,12 @@
#include <linux/platform_data/gpio-omap.h>
#include <asm/assembler.h>
+#include <linux/soc/ti/omap1-io.h>
+#include "hardware.h"
#include "ams-delta-fiq.h"
#include "board-ams-delta.h"
#include "iomap.h"
-#include "soc.h"
/*
* OMAP1510 GPIO related symbol copied from arch/arm/mach-omap1/gpio15xx.c.
@@ -21,7 +21,9 @@
#include <linux/platform_device.h>
#include <asm/fiq.h>
+#include <linux/soc/ti/omap1-io.h>
+#include "hardware.h"
#include "ams-delta-fiq.h"
#include "board-ams-delta.h"
@@ -16,7 +16,7 @@
#ifndef __AMS_DELTA_FIQ_H
#define __AMS_DELTA_FIQ_H
-#include <mach/irqs.h>
+#include "irqs.h"
/*
* Interrupt number used for passing control from FIQ to IRQ.
@@ -35,12 +35,11 @@
#include <asm/mach/map.h>
#include <linux/platform_data/keypad-omap.h>
-#include <mach/mux.h>
-#include <mach/hardware.h>
+#include "mux.h"
+#include "hardware.h"
#include "camera.h"
#include "usb.h"
-
#include "ams-delta-fiq.h"
#include "board-ams-delta.h"
#include "iomap.h"
@@ -23,13 +23,13 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/tc.h>
-#include <mach/mux.h>
-#include "flash.h"
+#include <linux/soc/ti/omap1-io.h>
#include <linux/platform_data/keypad-omap.h>
+#include <mach/tc.h>
-#include <mach/hardware.h>
-
+#include "mux.h"
+#include "flash.h"
+#include "hardware.h"
#include "iomap.h"
#include "common.h"
#include "fpga.h"
@@ -14,15 +14,13 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/mux.h>
-
+#include "hardware.h"
+#include "mux.h"
#include "usb.h"
-
#include "common.h"
/* assume no Mini-AB port */
@@ -27,22 +27,20 @@
#include <linux/mfd/tps65010.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
+#include <linux/omap-dma.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/keypad-omap.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/mux.h>
-#include <linux/omap-dma.h>
#include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
+#include "mux.h"
#include "flash.h"
-
-#include <mach/hardware.h>
+#include "hardware.h"
#include "usb.h"
-
#include "common.h"
#include "board-h2.h"
@@ -29,6 +29,8 @@
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <linux/omap-dma.h>
#include <linux/leds.h>
#include <asm/setup.h>
@@ -37,16 +39,12 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/mux.h>
#include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
-#include <linux/omap-dma.h>
+#include "mux.h"
#include "flash.h"
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
+#include "hardware.h"
+#include "irqs.h"
#include "usb.h"
-
#include "common.h"
#include "board-h3.h"
@@ -23,16 +23,16 @@
#include <linux/spi/ads7846.h>
#include <linux/omapfb.h>
#include <linux/platform_data/keypad-omap.h>
+#include <linux/soc/ti/omap1-io.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/omap7xx.h>
+#include "hardware.h"
+#include "omap7xx.h"
#include "mmc.h"
-
-#include <mach/irqs.h>
+#include "irqs.h"
#include "usb.h"
-
#include "common.h"
/* LCD register definition */
@@ -23,19 +23,17 @@
#include <linux/input.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
+#include <linux/platform_data/keypad-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/mux.h>
-#include "flash.h"
#include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
+#include "mux.h"
+#include "flash.h"
+#include "hardware.h"
#include "usb.h"
-
#include "iomap.h"
#include "common.h"
#include "mmc.h"
@@ -28,11 +28,9 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/mux.h>
-
-#include <mach/hardware.h>
+#include "mux.h"
+#include "hardware.h"
#include "usb.h"
-
#include "common.h"
#include "clock.h"
#include "mmc.h"
@@ -41,18 +41,17 @@
#include <linux/mfd/tps65010.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/platform_data/omap1_bl.h>
+#include <linux/soc/ti/omap1-io.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include "flash.h"
-#include <mach/mux.h>
#include <mach/tc.h>
-
-#include <mach/hardware.h>
+#include "flash.h"
+#include "mux.h"
+#include "hardware.h"
#include "usb.h"
-
#include "common.h"
/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
@@ -25,21 +25,19 @@
#include <linux/interrupt.h>
#include <linux/apm-emulation.h>
#include <linux/omapfb.h>
+#include <linux/omap-dma.h>
+#include <linux/platform_data/keypad-omap.h>
#include <linux/platform_data/omap1_bl.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include "flash.h"
-#include <mach/mux.h>
#include <mach/tc.h>
-#include <linux/omap-dma.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
+#include "flash.h"
+#include "mux.h"
+#include "hardware.h"
#include "usb.h"
-
#include "mmc.h"
#include "common.h"
@@ -24,22 +24,20 @@
#include <linux/omapfb.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/omap-dma.h>
#include <linux/platform_data/omap1_bl.h>
#include <linux/platform_data/leds-omap.h>
+#include <linux/platform_data/keypad-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include "flash.h"
-#include <mach/mux.h>
-#include <linux/omap-dma.h>
#include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
+#include "flash.h"
+#include "mux.h"
+#include "hardware.h"
#include "usb.h"
-
#include "common.h"
#define PALMTT_USBDETECT_GPIO 0
@@ -28,20 +28,18 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/platform_data/omap1_bl.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <linux/omap-dma.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include "flash.h"
-#include <mach/mux.h>
-#include <linux/omap-dma.h>
#include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
+#include "flash.h"
+#include "mux.h"
+#include "hardware.h"
#include "usb.h"
-
#include "common.h"
#define PALMZ71_USBDETECT_GPIO 0
@@ -19,17 +19,16 @@
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <linux/platform_data/keypad-omap.h>
+#include <linux/soc/ti/omap1-io.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/tc.h>
-#include <mach/mux.h>
+#include "mux.h"
#include "flash.h"
-
-#include <mach/hardware.h>
-
+#include "hardware.h"
#include "iomap.h"
#include "common.h"
#include "fpga.h"
@@ -12,9 +12,8 @@
#include <linux/gpio.h>
#include <linux/platform_device.h>
-#include <mach/hardware.h>
+#include "hardware.h"
#include "board-sx1.h"
-
#include "mmc.h"
#if IS_ENABLED(CONFIG_MMC_OMAP)
@@ -26,20 +26,18 @@
#include <linux/export.h>
#include <linux/omapfb.h>
#include <linux/platform_data/keypad-omap.h>
+#include <linux/omap-dma.h>
+#include <mach/tc.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "flash.h"
-#include <mach/mux.h>
-#include <linux/omap-dma.h>
-#include <mach/tc.h>
+#include "mux.h"
#include "board-sx1.h"
-
-#include <mach/hardware.h>
+#include "hardware.h"
#include "usb.h"
-
#include "common.h"
/* Write to I2C device */
@@ -16,11 +16,11 @@
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/soc/ti/omap1-io.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
+#include "hardware.h"
#include "soc.h"
#include "iomap.h"
#include "clock.h"
@@ -16,14 +16,13 @@
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/delay.h>
+#include <linux/soc/ti/omap1-io.h>
#include <asm/mach-types.h> /* for machine_is_* */
#include "soc.h"
-
-#include <mach/hardware.h>
+#include "hardware.h"
#include "usb.h" /* for OTG_BASE */
-
#include "iomap.h"
#include "clock.h"
#include "sram.h"
@@ -31,8 +31,7 @@
#include <asm/exception.h>
-#include <mach/irqs.h>
-
+#include "irqs.h"
#include "soc.h"
#include "i2c.h"
@@ -14,16 +14,16 @@
#include <linux/spi/spi.h>
#include <linux/platform_data/omap-wd-timer.h>
+#include <linux/soc/ti/omap1-io.h>
#include <asm/mach/map.h>
#include <mach/tc.h>
-#include <mach/mux.h>
+#include "mux.h"
-#include <mach/omap7xx.h>
+#include "omap7xx.h"
#include "camera.h"
-#include <mach/hardware.h>
-
+#include "hardware.h"
#include "common.h"
#include "clock.h"
#include "mmc.h"
@@ -21,7 +21,7 @@
#include <asm/mach/map.h>
-#include <mach/irqs.h>
+#include "irqs.h"
#if IS_ENABLED(CONFIG_FB_OMAP)
@@ -6,11 +6,12 @@
#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
+#include <linux/soc/ti/omap1-io.h>
#include <mach/tc.h>
+
#include "flash.h"
-#include <mach/hardware.h>
void omap1_set_vpp(struct platform_device *pdev, int enable)
{
@@ -24,8 +24,7 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-
+#include "hardware.h"
#include "iomap.h"
#include "common.h"
#include "fpga.h"
@@ -18,8 +18,9 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/soc/ti/omap1-soc.h>
-#include <mach/irqs.h>
+#include "irqs.h"
#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE
#define OMAP1510_GPIO_BASE 0xFFFCE000
@@ -18,9 +18,10 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/soc/ti/omap1-io.h>
-#include <mach/irqs.h>
-
+#include "hardware.h"
+#include "irqs.h"
#include "soc.h"
#define OMAP1610_GPIO1_BASE 0xfffbe400
@@ -19,8 +19,7 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
-#include <mach/irqs.h>
-
+#include "irqs.h"
#include "soc.h"
#define OMAP7XX_GPIO1_BASE 0xfffbc000
similarity index 99%
rename from arch/arm/mach-omap1/include/mach/hardware.h
rename to arch/arm/mach-omap1/hardware.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/mach-omap1/include/mach/hardware.h
- *
* Hardware definitions for TI OMAP processors and boards
*
* NOTE: Please put device driver specific defines into a separate header
@@ -7,7 +7,8 @@
#include <linux/i2c.h>
#include <linux/platform_data/i2c-omap.h>
-#include <mach/mux.h>
+
+#include "mux.h"
#include "soc.h"
#define OMAP_I2C_SIZE 0x3f
@@ -12,12 +12,11 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/soc/ti/omap1-io.h>
#include <asm/system_info.h>
#include "soc.h"
-
-#include <mach/hardware.h>
-
+#include "hardware.h"
#include "common.h"
#define OMAP_DIE_ID_0 0xfffe1800
deleted file mode 100644
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-omap1/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/* REVISIT: omap1 legacy drivers still rely on this */
-#include <mach/hardware.h>
-
-#endif
@@ -9,14 +9,13 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/omap-dma.h>
#include <asm/tlb.h>
#include <asm/mach/map.h>
-#include <mach/mux.h>
#include <mach/tc.h>
-#include <linux/omap-dma.h>
-
+#include "mux.h"
#include "iomap.h"
#include "common.h"
#include "clock.h"
@@ -47,9 +47,7 @@
#include <asm/mach/irq.h>
#include "soc.h"
-
-#include <mach/hardware.h>
-
+#include "hardware.h"
#include "common.h"
#define IRQ_BANK(irq) ((irq) >> 5)
similarity index 99%
rename from arch/arm/mach-omap1/include/mach/irqs.h
rename to arch/arm/mach-omap1/irqs.h
@@ -1,7 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
- * arch/arm/plat-omap/include/mach/irqs.h
- *
* Copyright (C) Greg Lonnon 2001
* Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
*
@@ -15,14 +15,13 @@
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-
#include <linux/omap-dma.h>
-#include <mach/mux.h>
-#include "soc.h"
+#include <linux/soc/ti/omap1-io.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <mach/irqs.h>
-
+#include "mux.h"
+#include "soc.h"
+#include "irqs.h"
#include "iomap.h"
#define DPS_RSTCT2_PER_EN (1 << 0)
similarity index 97%
rename from arch/arm/mach-omap1/include/mach/mtd-xip.h
rename to arch/arm/mach-omap1/mtd-xip.h
@@ -14,7 +14,8 @@
#ifndef __ARCH_OMAP_MTD_XIP_H__
#define __ARCH_OMAP_MTD_XIP_H__
-#include <mach/hardware.h>
+#include "hardware.h"
+#include <linux/soc/ti/omap1-io.h>
#define OMAP_MPU_TIMER_BASE (0xfffec500)
#define OMAP_MPU_TIMER_OFFSET 0x100
@@ -12,10 +12,10 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spinlock.h>
+#include <linux/soc/ti/omap1-io.h>
-#include <mach/hardware.h>
-
-#include <mach/mux.h>
+#include "hardware.h"
+#include "mux.h"
#ifdef CONFIG_OMAP_MUX
similarity index 98%
rename from arch/arm/mach-omap1/include/mach/mux.h
rename to arch/arm/mach-omap1/mux.h
@@ -1,7 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
- * arch/arm/plat-omap/include/mach/mux.h
- *
* Table of the Omap register configurations for the FUNC_MUX and
* PULL_DWN combinations.
*
@@ -20,9 +20,9 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/soc/ti/omap1-io.h>
-#include <mach/hardware.h>
-
+#include "hardware.h"
#include "common.h"
#define OCPI_BASE 0xfffec320
similarity index 100%
rename from arch/arm/mach-omap1/include/mach/omap1510.h
rename to arch/arm/mach-omap1/omap1510.h
similarity index 100%
rename from arch/arm/mach-omap1/include/mach/omap16xx.h
rename to arch/arm/mach-omap1/omap16xx.h
similarity index 100%
rename from arch/arm/mach-omap1/include/mach/omap7xx.h
rename to arch/arm/mach-omap1/omap7xx.h
@@ -52,13 +52,14 @@
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
+#include <linux/soc/ti/omap1-io.h>
#include <mach/tc.h>
-#include <mach/mux.h>
#include <linux/omap-dma.h>
#include <clocksource/timer-ti-dm.h>
-#include <mach/irqs.h>
-
+#include "hardware.h"
+#include "mux.h"
+#include "irqs.h"
#include "iomap.h"
#include "clock.h"
#include "pm.h"
@@ -34,6 +34,8 @@
#ifndef __ARCH_ARM_MACH_OMAP1_PM_H
#define __ARCH_ARM_MACH_OMAP1_PM_H
+#include <linux/soc/ti/omap1-io.h>
+
/*
* ----------------------------------------------------------------------------
* Register and offset definitions to be used in PM assembler code
@@ -6,8 +6,7 @@
#include <linux/io.h>
#include <linux/reboot.h>
-#include <mach/hardware.h>
-
+#include "hardware.h"
#include "iomap.h"
#include "common.h"
@@ -19,8 +19,9 @@
#include <asm/mach-types.h>
-#include <mach/mux.h>
+#include <mach/serial.h>
+#include "mux.h"
#include "pm.h"
#include "soc.h"
@@ -36,7 +36,7 @@
#include <asm/assembler.h>
-#include <mach/hardware.h>
+#include "hardware.h"
#include "iomap.h"
#include "pm.h"
@@ -1,6 +1,6 @@
/*
* We can move linux/soc/ti/omap1-soc.h here once the drivers are fixed
*/
-#include <mach/hardware.h>
-#include <mach/irqs.h>
+#include "hardware.h"
+#include "irqs.h"
#include <asm/irq.h>
@@ -6,11 +6,11 @@
*/
#include <linux/linkage.h>
+#include <linux/soc/ti/omap1-io.h>
#include <asm/assembler.h>
-#include <mach/hardware.h>
-
+#include "hardware.h"
#include "iomap.h"
.text
@@ -47,10 +47,10 @@
#include <asm/irq.h>
-#include <mach/hardware.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
+#include "hardware.h"
#include "iomap.h"
#include "common.h"
@@ -26,6 +26,7 @@
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/platform_data/dmtimer-omap.h>
+#include <linux/soc/ti/omap1-io.h>
#include <clocksource/timer-ti-dm.h>
@@ -52,8 +52,7 @@
#include <plat/counter-32k.h>
-#include <mach/hardware.h>
-
+#include "hardware.h"
#include "common.h"
/*
@@ -11,13 +11,13 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/delay.h>
+#include <linux/soc/ti/omap1-io.h>
#include <asm/irq.h>
-#include <mach/mux.h>
-
+#include "hardware.h"
+#include "mux.h"
#include "usb.h"
-
#include "common.h"
/* These routines should handle the standard chip-specific modes
@@ -35,9 +35,9 @@
#include <linux/omap-dma.h>
#ifdef CONFIG_ARCH_OMAP1
-#include <mach/hardware.h>
#include <linux/soc/ti/omap1-io.h>
#include <linux/soc/ti/omap1-soc.h>
+#include <mach/tc.h>
#endif
/*
deleted file mode 100644
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * OMAP cpu type detection
- *
- * Copyright (C) 2004, 2008 Nokia Corporation
- *
- * Copyright (C) 2009-11 Texas Instruments.
- *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
- *
- * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
- */
-
-#ifndef __ASM_ARCH_OMAP_CPU_H
-#define __ASM_ARCH_OMAP_CPU_H
-
-#ifdef CONFIG_ARCH_OMAP1
-#include <mach/soc.h>
-#endif
-
-#endif
Most of the header files are no longer referenced from outside arch/arm/mach-omap1, so move them all to that place directly and change their users to use the new location. The exceptions are: - mach/tc.h is used by arch/arm/plat-omap/dma.c - mach/compress.h is used by the core architecture code - mach/serial.h is used by mach/compress.h The mach/memory.h is empty and gets removed in the process, avoiding the need for CONFIG_NEED_MACH_MEMORY_H. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- arch/arm/Kconfig | 1 - arch/arm/mach-omap1/ams-delta-fiq-handler.S | 3 ++- arch/arm/mach-omap1/ams-delta-fiq.c | 2 ++ arch/arm/mach-omap1/ams-delta-fiq.h | 2 +- arch/arm/mach-omap1/board-ams-delta.c | 5 ++--- arch/arm/mach-omap1/board-fsample.c | 10 ++++----- arch/arm/mach-omap1/board-generic.c | 6 ++---- arch/arm/mach-omap1/board-h2.c | 10 ++++----- arch/arm/mach-omap1/board-h3.c | 12 +++++------ arch/arm/mach-omap1/board-htcherald.c | 8 +++---- arch/arm/mach-omap1/board-innovator.c | 10 ++++----- arch/arm/mach-omap1/board-nokia770.c | 6 ++---- arch/arm/mach-omap1/board-osk.c | 9 ++++---- arch/arm/mach-omap1/board-palmte.c | 12 +++++------ arch/arm/mach-omap1/board-palmtt.c | 12 +++++------ arch/arm/mach-omap1/board-palmz71.c | 12 +++++------ arch/arm/mach-omap1/board-perseus2.c | 7 +++---- arch/arm/mach-omap1/board-sx1-mmc.c | 3 +-- arch/arm/mach-omap1/board-sx1.c | 10 ++++----- arch/arm/mach-omap1/clock.c | 4 ++-- arch/arm/mach-omap1/clock_data.c | 5 ++--- arch/arm/mach-omap1/common.h | 3 +-- arch/arm/mach-omap1/devices.c | 8 +++---- arch/arm/mach-omap1/fb.c | 2 +- arch/arm/mach-omap1/flash.c | 3 ++- arch/arm/mach-omap1/fpga.c | 3 +-- arch/arm/mach-omap1/gpio15xx.c | 3 ++- arch/arm/mach-omap1/gpio16xx.c | 5 +++-- arch/arm/mach-omap1/gpio7xx.c | 3 +-- .../mach-omap1/{include/mach => }/hardware.h | 2 -- arch/arm/mach-omap1/i2c.c | 3 ++- arch/arm/mach-omap1/id.c | 5 ++--- arch/arm/mach-omap1/include/mach/memory.h | 12 ----------- arch/arm/mach-omap1/io.c | 5 ++--- arch/arm/mach-omap1/irq.c | 4 +--- arch/arm/mach-omap1/{include/mach => }/irqs.h | 2 -- arch/arm/mach-omap1/mcbsp.c | 9 ++++---- .../mach-omap1/{include/mach => }/mtd-xip.h | 3 ++- arch/arm/mach-omap1/mux.c | 6 +++--- arch/arm/mach-omap1/{include/mach => }/mux.h | 2 -- arch/arm/mach-omap1/ocpi.c | 4 ++-- .../mach-omap1/{include/mach => }/omap1510.h | 0 .../mach-omap1/{include/mach => }/omap16xx.h | 0 .../mach-omap1/{include/mach => }/omap7xx.h | 0 arch/arm/mach-omap1/pm.c | 7 ++++--- arch/arm/mach-omap1/pm.h | 2 ++ arch/arm/mach-omap1/reset.c | 3 +-- arch/arm/mach-omap1/serial.c | 3 ++- arch/arm/mach-omap1/sleep.S | 2 +- arch/arm/mach-omap1/soc.h | 4 ++-- arch/arm/mach-omap1/sram.S | 4 ++-- arch/arm/mach-omap1/time.c | 2 +- arch/arm/mach-omap1/timer.c | 1 + arch/arm/mach-omap1/timer32k.c | 3 +-- arch/arm/mach-omap1/usb.c | 6 +++--- arch/arm/plat-omap/dma.c | 2 +- arch/arm/plat-omap/include/plat/cpu.h | 21 ------------------- 57 files changed, 118 insertions(+), 178 deletions(-) rename arch/arm/mach-omap1/{include/mach => }/hardware.h (99%) delete mode 100644 arch/arm/mach-omap1/include/mach/memory.h rename arch/arm/mach-omap1/{include/mach => }/irqs.h (99%) rename arch/arm/mach-omap1/{include/mach => }/mtd-xip.h (97%) rename arch/arm/mach-omap1/{include/mach => }/mux.h (98%) rename arch/arm/mach-omap1/{include/mach => }/omap1510.h (100%) rename arch/arm/mach-omap1/{include/mach => }/omap16xx.h (100%) rename arch/arm/mach-omap1/{include/mach => }/omap7xx.h (100%) delete mode 100644 arch/arm/plat-omap/include/plat/cpu.h