diff mbox series

[09/10] ARM: dts: omap4: convert IOMMUs to use ti-sysc

Message ID 20190828075644.4493-10-t-kristo@ti.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: omap changes for IOMMU / reset support | expand

Commit Message

Tero Kristo Aug. 28, 2019, 7:56 a.m. UTC 
Convert omap4 IOMMUs to use ti-sysc instead of legacy omap-hwmod based
implementation. Enable the IOMMUs also while doing this.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/boot/dts/omap4-l4.dtsi | 11 ++++++---
 arch/arm/boot/dts/omap4.dtsi    | 43 +++++++++++++++++++++------------
 2 files changed, 36 insertions(+), 18 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi
index 0977bc39955b..7eca6cdbbdd9 100644
--- a/arch/arm/boot/dts/omap4-l4.dtsi
+++ b/arch/arm/boot/dts/omap4-l4.dtsi
@@ -321,7 +321,6 @@ 
 
 		target-module@66000 {			/* 0x4a066000, ap 25 26.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "mmu_dsp";
 			reg = <0x66000 0x4>,
 			      <0x66010 0x4>,
 			      <0x66014 0x4>;
@@ -335,12 +334,18 @@ 
 			/* Domains (V, P, C): iva, tesla_pwrdm, tesla_clkdm */
 			clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>;
 			clock-names = "fck";
+			resets = <&prm_tesla 1>;
+			reset-names = "rstctrl";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x66000 0x1000>;
 
-			/* mmu_dsp cannot be moved before reset driver */
-			status = "disabled";
+			mmu_dsp: mmu@0 {
+				compatible = "ti,omap4-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index e377f66fc322..f28fe1c36b0c 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -173,14 +173,6 @@ 
 			#gpio-cells = <2>;
 		};
 
-		mmu_dsp: mmu@4a066000 {
-			compatible = "ti,omap4-iommu";
-			reg = <0x4a066000 0x100>;
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_dsp";
-			#iommu-cells = <0>;
-		};
-
 		target-module@52000000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			ti,hwmods = "iss";
@@ -206,14 +198,35 @@ 
 			/* No child device binding, driver in staging */
 		};
 
-		mmu_ipu: mmu@55082000 {
-			compatible = "ti,omap4-iommu";
-			reg = <0x55082000 0x100>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_ipu";
-			#iommu-cells = <0>;
-			ti,iommu-bus-err-back;
+		target-module@55082000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x55082000 0x4>,
+			      <0x55082010 0x4>,
+			      <0x55082014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&ducati_clkctrl OMAP4_IPU_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_core 2>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x55082000 0x100>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu_ipu: mmu@0 {
+				compatible = "ti,omap4-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,iommu-bus-err-back;
+			};
 		};
+
 		target-module@4012c000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			ti,hwmods = "slimbus1";