diff mbox series

ARM: dts: logicpd-torpedo-37xx-devkit: Increase camera pixel clock

Message ID 20191021210532.1590-1-aford173@gmail.com
State New
Headers show
Series ARM: dts: logicpd-torpedo-37xx-devkit: Increase camera pixel clock | expand

Commit Message

Adam Ford Oct. 21, 2019, 9:05 p.m. UTC
The default settings used on the baseboard are good for the
OMAP3530 and are compatible with the DM3730.  However, the
DM3730 has a faster L3 clock which means the camera pixel clock
can also be pushed faster as well.

This patch increase the Pixel clock to 90MHz which is the
maximum the current ISP driver permits for an L3 clock
of 200MHz.

Signed-off-by: Adam Ford <aford173@gmail.com>

Comments

Tony Lindgren Oct. 22, 2019, 4:33 p.m. UTC | #1
* Adam Ford <aford173@gmail.com> [191021 14:06]:
> The default settings used on the baseboard are good for the
> OMAP3530 and are compatible with the DM3730.  However, the
> DM3730 has a faster L3 clock which means the camera pixel clock
> can also be pushed faster as well.
> 
> This patch increase the Pixel clock to 90MHz which is the
> maximum the current ISP driver permits for an L3 clock
> of 200MHz.

Thanks applying into omap-for-v5.5/dt.

Tony
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
index 18c27e85051f..fc33c76498b3 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@@ -50,6 +50,11 @@ 
 	};
 };
 
+/* The DM3730 has a faster L3 than OMAP35, so increase pixel clock */
+&mt9p031_out {
+	pixel-clock-frequency = <90000000>;
+};
+
 &omap3_pmx_core {
 	mmc3_pins: pinmux_mm3_pins {
 		pinctrl-single,pins = <