| Message ID | 20191028124238.19224-13-t-kristo@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | remoteproc: omap changes on top of v5.4-rc1 | expand |
On Mon 28 Oct 05:42 PDT 2019, Tero Kristo wrote: > From: Suman Anna <s-anna@ti.com> > > The remote processors in OMAP4+ SoCs are equipped with internal > timers, like the internal SysTick timer in a Cortex M3/M4 NVIC or > the CTM timer within Unicache in IPU & DSP. However, these timers > are gated when the processor subsystem clock is gated, making > them rather difficult to use as OS tick sources. They will not > be able to wakeup the processor from any processor-sleep induced > clock-gating states. > > This can be avoided by using an external timer as the tick source, > which can be controlled independently by the OMAP remoteproc > driver code, but still allowing the processor subsystem clock to > be auto-gated when the remoteproc cores are idle. > > This patch adds the support for OMAP remote processors to request > timer(s) to be used by the remoteproc. The timers are enabled and > disabled in line with the enabling/disabling of the remoteproc. > The timer data is not mandatory if the advanced device management > features are not required. > > The core timer functionality is provided by the OMAP DMTimer > clocksource driver, which does not export any API. The logic is > implemented through the timer device's platform data ops. The OMAP > remoteproc driver mainly requires ops to request/free a dmtimer, > and to start/stop a timer. The split ops helps in controlling the > timer state without having to request and release a timer everytime > it needs to use the timer. > > NOTE: If the gptimer is already in use by the time IPU and/or > DSP are loaded, the processors will fail to boot. > > Signed-off-by: Suman Anna <s-anna@ti.com> > Signed-off-by: Tero Kristo <t-kristo@ti.com> > --- > drivers/remoteproc/omap_remoteproc.c | 258 +++++++++++++++++++++++++++ > 1 file changed, 258 insertions(+) > > diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c > index 016d5beda195..8450dd79d391 100644 > --- a/drivers/remoteproc/omap_remoteproc.c > +++ b/drivers/remoteproc/omap_remoteproc.c > @@ -27,6 +27,9 @@ > #include <linux/regmap.h> > #include <linux/mfd/syscon.h> > #include <linux/reset.h> > +#include <clocksource/timer-ti-dm.h> > + > +#include <linux/platform_data/dmtimer-omap.h> > > #include "omap_remoteproc.h" > #include "remoteproc_internal.h" > @@ -61,6 +64,16 @@ struct omap_rproc_mem { > size_t size; > }; > > +/** > + * struct omap_rproc_timer - data structure for a timer used by a omap rproc > + * @odt: timer pointer > + * @timer_ops: OMAP dmtimer ops for @odt timer > + */ > +struct omap_rproc_timer { > + struct omap_dm_timer *odt; > + const struct omap_dm_timer_ops *timer_ops; > +}; > + > /** > * struct omap_rproc - omap remote processor state > * @mbox: mailbox channel handle > @@ -68,6 +81,8 @@ struct omap_rproc_mem { > * @boot_data: boot data structure for setting processor boot address > * @mem: internal memory regions data > * @num_mems: number of internal memory regions > + * @num_timers: number of rproc timer(s) > + * @timers: timer(s) info used by rproc > * @rproc: rproc handle > * @reset: reset handle > */ > @@ -77,6 +92,8 @@ struct omap_rproc { > struct omap_rproc_boot_data *boot_data; > struct omap_rproc_mem *mem; > int num_mems; > + int num_timers; > + struct omap_rproc_timer *timers; > struct rproc *rproc; > struct reset_control *reset; > }; > @@ -91,6 +108,212 @@ struct omap_rproc_dev_data { > const char *fw_name; > }; > > +/** > + * omap_rproc_request_timer - request a timer for a remoteproc Add parenthesis on functions in kerneldoc. > + * @np: device node pointer to the desired timer > + * @timer: handle to a struct omap_rproc_timer to return the timer handle > + * > + * This helper function is used primarily to request a timer associated with > + * a remoteproc. The returned handle is stored in the .odt field of the > + * @timer structure passed in, and is used to invoke other timer specific > + * ops (like starting a timer either during device initialization or during > + * a resume operation, or for stopping/freeing a timer). > + * > + * Returns 0 on success, otherwise an appropriate failure > + */ > +static int omap_rproc_request_timer(struct device_node *np, > + struct omap_rproc_timer *timer) > +{ > + int ret = 0; > + > + timer->odt = timer->timer_ops->request_by_node(np); > + if (!timer->odt) { > + pr_err("request for timer node %p failed\n", np); > + return -EBUSY; > + } > + > + ret = timer->timer_ops->set_source(timer->odt, OMAP_TIMER_SRC_SYS_CLK); > + if (ret) { > + pr_err("error setting OMAP_TIMER_SRC_SYS_CLK as source for timer node %p\n", > + np); You could easily pass a struct device * from omap_rproc_enable_timers() to make this a more useful dev_err() > + timer->timer_ops->free(timer->odt); > + return ret; > + } > + > + /* clean counter, remoteproc code will set the value */ > + timer->timer_ops->set_load(timer->odt, 0, 0); > + > + return ret; ret is 0 here, so return 0; > +} > + > +/** > + * omap_rproc_start_timer - start a timer for a remoteproc > + * @timer: handle to a OMAP rproc timer > + * > + * This helper function is used to start a timer associated with a remoteproc, > + * obtained using the request_timer ops. The helper function needs to be > + * invoked by the driver to start the timer (during device initialization) > + * or to just resume the timer. > + * > + * Returns 0 on success, otherwise a failure as returned by DMTimer ops > + */ > +static inline int omap_rproc_start_timer(struct omap_rproc_timer *timer) > +{ > + return timer->timer_ops->start(timer->odt); > +} > + > +/** > + * omap_rproc_stop_timer - stop a timer for a remoteproc > + * @timer: handle to a OMAP rproc timer > + * > + * This helper function is used to disable a timer associated with a > + * remoteproc, and needs to be called either during a device shutdown > + * or suspend operation. The separate helper function allows the driver > + * to just stop a timer without having to release the timer during a > + * suspend operation. > + * > + * Returns 0 on success, otherwise a failure as returned by DMTimer ops > + */ > +static inline int omap_rproc_stop_timer(struct omap_rproc_timer *timer) > +{ > + return timer->timer_ops->stop(timer->odt); > +} > + > +/** > + * omap_rproc_release_timer - release a timer for a remoteproc > + * @timer: handle to a OMAP rproc timer > + * > + * This helper function is used primarily to release a timer associated > + * with a remoteproc. The dmtimer will be available for other clients to > + * use once released. > + * > + * Returns 0 on success, otherwise a failure as returned by DMTimer ops > + */ > +static inline int omap_rproc_release_timer(struct omap_rproc_timer *timer) > +{ > + return timer->timer_ops->free(timer->odt); > +} > + > +/** > + * omap_rproc_enable_timers - enable the timers for a remoteproc > + * @rproc: handle of a remote processor > + * @configure: boolean flag used to acquire and configure the timer handle > + * > + * This function is used primarily to enable the timers associated with > + * a remoteproc. The configure flag is provided to allow the driver to > + * to either acquire and start a timer (during device initialization) or > + * to just start a timer (during a resume operation). > + */ > +static int omap_rproc_enable_timers(struct rproc *rproc, bool configure) > +{ > + int i; > + int ret = 0; > + struct platform_device *tpdev; > + struct dmtimer_platform_data *tpdata; > + const struct omap_dm_timer_ops *timer_ops; > + struct omap_rproc *oproc = rproc->priv; > + struct omap_rproc_timer *timers = oproc->timers; > + struct device *dev = rproc->dev.parent; > + struct device_node *np = NULL; > + > + if (oproc->num_timers <= 0) > + return 0; > + > + if (!configure) > + goto start_timers; > + > + for (i = 0; i < oproc->num_timers; i++) { > + np = of_parse_phandle(dev->of_node, "timers", i); > + if (!np) { > + ret = -ENXIO; > + dev_err(dev, "device node lookup for timer at index %d failed: %d\n", > + i, ret); > + goto free_timers; > + } > + > + tpdev = of_find_device_by_node(np); > + if (!tpdev) { > + ret = -ENODEV; > + dev_err(dev, "could not get timer platform device\n"); > + goto put_node; > + } > + > + tpdata = dev_get_platdata(&tpdev->dev); > + put_device(&tpdev->dev); > + if (!tpdata) { > + ret = -EINVAL; > + dev_err(dev, "dmtimer pdata structure NULL\n"); > + goto put_node; > + } > + > + timer_ops = tpdata->timer_ops; > + if (!timer_ops || !timer_ops->request_by_node || > + !timer_ops->set_source || !timer_ops->set_load || > + !timer_ops->free || !timer_ops->start || > + !timer_ops->stop) { > + ret = -EINVAL; > + dev_err(dev, "device does not have required timer ops\n"); > + goto put_node; > + } > + > + timers[i].timer_ops = timer_ops; > + ret = omap_rproc_request_timer(np, &timers[i]); > + if (ret) { > + dev_err(dev, "request for timer %p failed: %d\n", np, > + ret); > + goto put_node; > + } > + of_node_put(np); > + } > + > +start_timers: > + for (i = 0; i < oproc->num_timers; i++) > + omap_rproc_start_timer(&timers[i]); > + return 0; > + > +put_node: > + of_node_put(np); > +free_timers: > + while (i--) { > + omap_rproc_release_timer(&timers[i]); > + timers[i].odt = NULL; > + timers[i].timer_ops = NULL; > + } > + > + return ret; > +} > + > +/** > + * omap_rproc_disable_timers - disable the timers for a remoteproc > + * @rproc: handle of a remote processor > + * @configure: boolean flag used to release the timer handle > + * > + * This function is used primarily to disable the timers associated with > + * a remoteproc. The configure flag is provided to allow the driver to > + * to either stop and release a timer (during device shutdown) or to just > + * stop a timer (during a suspend operation). > + */ > +static int omap_rproc_disable_timers(struct rproc *rproc, bool configure) > +{ > + int i; > + struct omap_rproc *oproc = rproc->priv; > + struct omap_rproc_timer *timers = oproc->timers; > + > + if (oproc->num_timers <= 0) > + return 0; > + > + for (i = 0; i < oproc->num_timers; i++) { > + omap_rproc_stop_timer(&timers[i]); > + if (configure) { > + omap_rproc_release_timer(&timers[i]); > + timers[i].odt = NULL; > + timers[i].timer_ops = NULL; > + } > + } > + > + return 0; > +} > + > /** > * omap_rproc_mbox_callback() - inbound mailbox message handler > * @client: mailbox client pointer used for requesting the mailbox channel > @@ -226,6 +449,12 @@ static int omap_rproc_start(struct rproc *rproc) > goto put_mbox; > } > > + ret = omap_rproc_enable_timers(rproc, true); > + if (ret) { > + dev_err(dev, "omap_rproc_enable_timers failed: %d\n", ret); > + goto put_mbox; > + } > + > reset_control_deassert(oproc->reset); > > return 0; > @@ -239,9 +468,14 @@ static int omap_rproc_start(struct rproc *rproc) > static int omap_rproc_stop(struct rproc *rproc) > { > struct omap_rproc *oproc = rproc->priv; > + int ret; > > reset_control_assert(oproc->reset); > > + ret = omap_rproc_disable_timers(rproc, true); > + if (ret) > + return ret; > + > mbox_free_channel(oproc->mbox); > > return 0; > @@ -548,6 +782,30 @@ static int omap_rproc_probe(struct platform_device *pdev) > if (ret) > goto free_rproc; > > + /* > + * Timer nodes are directly used in client nodes as phandles, so > + * retrieve the count using appropriate size > + */ > + oproc->num_timers = of_property_count_elems_of_size(np, "timers", Didn't this get a ti, prefix? And I think you should use of_count_phandle_with_args() instead. Regards, Bjorn > + sizeof(phandle)); > + if (oproc->num_timers <= 0) { > + dev_dbg(&pdev->dev, "device does not have timers, status = %d\n", > + oproc->num_timers); > + oproc->num_timers = 0; > + } > + > + if (oproc->num_timers) { > + oproc->timers = devm_kzalloc(&pdev->dev, sizeof(*oproc->timers) > + * oproc->num_timers, GFP_KERNEL); > + if (!oproc->timers) { > + ret = -ENOMEM; > + goto free_rproc; > + } > + > + dev_dbg(&pdev->dev, "device has %d tick timers\n", > + oproc->num_timers); > + } > + > ret = of_reserved_mem_device_init(&pdev->dev); > if (ret) { > dev_err(&pdev->dev, "device does not have specific CMA pool\n"); > -- > 2.17.1 > > -- > Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
On 12/11/2019 06:13, Bjorn Andersson wrote: > On Mon 28 Oct 05:42 PDT 2019, Tero Kristo wrote: > >> From: Suman Anna <s-anna@ti.com> >> >> The remote processors in OMAP4+ SoCs are equipped with internal >> timers, like the internal SysTick timer in a Cortex M3/M4 NVIC or >> the CTM timer within Unicache in IPU & DSP. However, these timers >> are gated when the processor subsystem clock is gated, making >> them rather difficult to use as OS tick sources. They will not >> be able to wakeup the processor from any processor-sleep induced >> clock-gating states. >> >> This can be avoided by using an external timer as the tick source, >> which can be controlled independently by the OMAP remoteproc >> driver code, but still allowing the processor subsystem clock to >> be auto-gated when the remoteproc cores are idle. >> >> This patch adds the support for OMAP remote processors to request >> timer(s) to be used by the remoteproc. The timers are enabled and >> disabled in line with the enabling/disabling of the remoteproc. >> The timer data is not mandatory if the advanced device management >> features are not required. >> >> The core timer functionality is provided by the OMAP DMTimer >> clocksource driver, which does not export any API. The logic is >> implemented through the timer device's platform data ops. The OMAP >> remoteproc driver mainly requires ops to request/free a dmtimer, >> and to start/stop a timer. The split ops helps in controlling the >> timer state without having to request and release a timer everytime >> it needs to use the timer. >> >> NOTE: If the gptimer is already in use by the time IPU and/or >> DSP are loaded, the processors will fail to boot. >> >> Signed-off-by: Suman Anna <s-anna@ti.com> >> Signed-off-by: Tero Kristo <t-kristo@ti.com> >> --- >> drivers/remoteproc/omap_remoteproc.c | 258 +++++++++++++++++++++++++++ >> 1 file changed, 258 insertions(+) >> >> diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c >> index 016d5beda195..8450dd79d391 100644 >> --- a/drivers/remoteproc/omap_remoteproc.c >> +++ b/drivers/remoteproc/omap_remoteproc.c >> @@ -27,6 +27,9 @@ >> #include <linux/regmap.h> >> #include <linux/mfd/syscon.h> >> #include <linux/reset.h> >> +#include <clocksource/timer-ti-dm.h> >> + >> +#include <linux/platform_data/dmtimer-omap.h> >> >> #include "omap_remoteproc.h" >> #include "remoteproc_internal.h" >> @@ -61,6 +64,16 @@ struct omap_rproc_mem { >> size_t size; >> }; >> >> +/** >> + * struct omap_rproc_timer - data structure for a timer used by a omap rproc >> + * @odt: timer pointer >> + * @timer_ops: OMAP dmtimer ops for @odt timer >> + */ >> +struct omap_rproc_timer { >> + struct omap_dm_timer *odt; >> + const struct omap_dm_timer_ops *timer_ops; >> +}; >> + >> /** >> * struct omap_rproc - omap remote processor state >> * @mbox: mailbox channel handle >> @@ -68,6 +81,8 @@ struct omap_rproc_mem { >> * @boot_data: boot data structure for setting processor boot address >> * @mem: internal memory regions data >> * @num_mems: number of internal memory regions >> + * @num_timers: number of rproc timer(s) >> + * @timers: timer(s) info used by rproc >> * @rproc: rproc handle >> * @reset: reset handle >> */ >> @@ -77,6 +92,8 @@ struct omap_rproc { >> struct omap_rproc_boot_data *boot_data; >> struct omap_rproc_mem *mem; >> int num_mems; >> + int num_timers; >> + struct omap_rproc_timer *timers; >> struct rproc *rproc; >> struct reset_control *reset; >> }; >> @@ -91,6 +108,212 @@ struct omap_rproc_dev_data { >> const char *fw_name; >> }; >> >> +/** >> + * omap_rproc_request_timer - request a timer for a remoteproc > > Add parenthesis on functions in kerneldoc. Ok. > >> + * @np: device node pointer to the desired timer >> + * @timer: handle to a struct omap_rproc_timer to return the timer handle >> + * >> + * This helper function is used primarily to request a timer associated with >> + * a remoteproc. The returned handle is stored in the .odt field of the >> + * @timer structure passed in, and is used to invoke other timer specific >> + * ops (like starting a timer either during device initialization or during >> + * a resume operation, or for stopping/freeing a timer). >> + * >> + * Returns 0 on success, otherwise an appropriate failure >> + */ >> +static int omap_rproc_request_timer(struct device_node *np, >> + struct omap_rproc_timer *timer) >> +{ >> + int ret = 0; >> + >> + timer->odt = timer->timer_ops->request_by_node(np); >> + if (!timer->odt) { >> + pr_err("request for timer node %p failed\n", np); >> + return -EBUSY; >> + } >> + >> + ret = timer->timer_ops->set_source(timer->odt, OMAP_TIMER_SRC_SYS_CLK); >> + if (ret) { >> + pr_err("error setting OMAP_TIMER_SRC_SYS_CLK as source for timer node %p\n", >> + np); > > You could easily pass a struct device * from omap_rproc_enable_timers() > to make this a more useful dev_err() True, let me fix that. > >> + timer->timer_ops->free(timer->odt); >> + return ret; >> + } >> + >> + /* clean counter, remoteproc code will set the value */ >> + timer->timer_ops->set_load(timer->odt, 0, 0); >> + >> + return ret; > > ret is 0 here, so return 0; Right, will fix. > >> +} >> + >> +/** >> + * omap_rproc_start_timer - start a timer for a remoteproc >> + * @timer: handle to a OMAP rproc timer >> + * >> + * This helper function is used to start a timer associated with a remoteproc, >> + * obtained using the request_timer ops. The helper function needs to be >> + * invoked by the driver to start the timer (during device initialization) >> + * or to just resume the timer. >> + * >> + * Returns 0 on success, otherwise a failure as returned by DMTimer ops >> + */ >> +static inline int omap_rproc_start_timer(struct omap_rproc_timer *timer) >> +{ >> + return timer->timer_ops->start(timer->odt); >> +} >> + >> +/** >> + * omap_rproc_stop_timer - stop a timer for a remoteproc >> + * @timer: handle to a OMAP rproc timer >> + * >> + * This helper function is used to disable a timer associated with a >> + * remoteproc, and needs to be called either during a device shutdown >> + * or suspend operation. The separate helper function allows the driver >> + * to just stop a timer without having to release the timer during a >> + * suspend operation. >> + * >> + * Returns 0 on success, otherwise a failure as returned by DMTimer ops >> + */ >> +static inline int omap_rproc_stop_timer(struct omap_rproc_timer *timer) >> +{ >> + return timer->timer_ops->stop(timer->odt); >> +} >> + >> +/** >> + * omap_rproc_release_timer - release a timer for a remoteproc >> + * @timer: handle to a OMAP rproc timer >> + * >> + * This helper function is used primarily to release a timer associated >> + * with a remoteproc. The dmtimer will be available for other clients to >> + * use once released. >> + * >> + * Returns 0 on success, otherwise a failure as returned by DMTimer ops >> + */ >> +static inline int omap_rproc_release_timer(struct omap_rproc_timer *timer) >> +{ >> + return timer->timer_ops->free(timer->odt); >> +} >> + >> +/** >> + * omap_rproc_enable_timers - enable the timers for a remoteproc >> + * @rproc: handle of a remote processor >> + * @configure: boolean flag used to acquire and configure the timer handle >> + * >> + * This function is used primarily to enable the timers associated with >> + * a remoteproc. The configure flag is provided to allow the driver to >> + * to either acquire and start a timer (during device initialization) or >> + * to just start a timer (during a resume operation). >> + */ >> +static int omap_rproc_enable_timers(struct rproc *rproc, bool configure) >> +{ >> + int i; >> + int ret = 0; >> + struct platform_device *tpdev; >> + struct dmtimer_platform_data *tpdata; >> + const struct omap_dm_timer_ops *timer_ops; >> + struct omap_rproc *oproc = rproc->priv; >> + struct omap_rproc_timer *timers = oproc->timers; >> + struct device *dev = rproc->dev.parent; >> + struct device_node *np = NULL; >> + >> + if (oproc->num_timers <= 0) >> + return 0; >> + >> + if (!configure) >> + goto start_timers; >> + >> + for (i = 0; i < oproc->num_timers; i++) { >> + np = of_parse_phandle(dev->of_node, "timers", i); >> + if (!np) { >> + ret = -ENXIO; >> + dev_err(dev, "device node lookup for timer at index %d failed: %d\n", >> + i, ret); >> + goto free_timers; >> + } >> + >> + tpdev = of_find_device_by_node(np); >> + if (!tpdev) { >> + ret = -ENODEV; >> + dev_err(dev, "could not get timer platform device\n"); >> + goto put_node; >> + } >> + >> + tpdata = dev_get_platdata(&tpdev->dev); >> + put_device(&tpdev->dev); >> + if (!tpdata) { >> + ret = -EINVAL; >> + dev_err(dev, "dmtimer pdata structure NULL\n"); >> + goto put_node; >> + } >> + >> + timer_ops = tpdata->timer_ops; >> + if (!timer_ops || !timer_ops->request_by_node || >> + !timer_ops->set_source || !timer_ops->set_load || >> + !timer_ops->free || !timer_ops->start || >> + !timer_ops->stop) { >> + ret = -EINVAL; >> + dev_err(dev, "device does not have required timer ops\n"); >> + goto put_node; >> + } >> + >> + timers[i].timer_ops = timer_ops; >> + ret = omap_rproc_request_timer(np, &timers[i]); >> + if (ret) { >> + dev_err(dev, "request for timer %p failed: %d\n", np, >> + ret); >> + goto put_node; >> + } >> + of_node_put(np); >> + } >> + >> +start_timers: >> + for (i = 0; i < oproc->num_timers; i++) >> + omap_rproc_start_timer(&timers[i]); >> + return 0; >> + >> +put_node: >> + of_node_put(np); >> +free_timers: >> + while (i--) { >> + omap_rproc_release_timer(&timers[i]); >> + timers[i].odt = NULL; >> + timers[i].timer_ops = NULL; >> + } >> + >> + return ret; >> +} >> + >> +/** >> + * omap_rproc_disable_timers - disable the timers for a remoteproc >> + * @rproc: handle of a remote processor >> + * @configure: boolean flag used to release the timer handle >> + * >> + * This function is used primarily to disable the timers associated with >> + * a remoteproc. The configure flag is provided to allow the driver to >> + * to either stop and release a timer (during device shutdown) or to just >> + * stop a timer (during a suspend operation). >> + */ >> +static int omap_rproc_disable_timers(struct rproc *rproc, bool configure) >> +{ >> + int i; >> + struct omap_rproc *oproc = rproc->priv; >> + struct omap_rproc_timer *timers = oproc->timers; >> + >> + if (oproc->num_timers <= 0) >> + return 0; >> + >> + for (i = 0; i < oproc->num_timers; i++) { >> + omap_rproc_stop_timer(&timers[i]); >> + if (configure) { >> + omap_rproc_release_timer(&timers[i]); >> + timers[i].odt = NULL; >> + timers[i].timer_ops = NULL; >> + } >> + } >> + >> + return 0; >> +} >> + >> /** >> * omap_rproc_mbox_callback() - inbound mailbox message handler >> * @client: mailbox client pointer used for requesting the mailbox channel >> @@ -226,6 +449,12 @@ static int omap_rproc_start(struct rproc *rproc) >> goto put_mbox; >> } >> >> + ret = omap_rproc_enable_timers(rproc, true); >> + if (ret) { >> + dev_err(dev, "omap_rproc_enable_timers failed: %d\n", ret); >> + goto put_mbox; >> + } >> + >> reset_control_deassert(oproc->reset); >> >> return 0; >> @@ -239,9 +468,14 @@ static int omap_rproc_start(struct rproc *rproc) >> static int omap_rproc_stop(struct rproc *rproc) >> { >> struct omap_rproc *oproc = rproc->priv; >> + int ret; >> >> reset_control_assert(oproc->reset); >> >> + ret = omap_rproc_disable_timers(rproc, true); >> + if (ret) >> + return ret; >> + >> mbox_free_channel(oproc->mbox); >> >> return 0; >> @@ -548,6 +782,30 @@ static int omap_rproc_probe(struct platform_device *pdev) >> if (ret) >> goto free_rproc; >> >> + /* >> + * Timer nodes are directly used in client nodes as phandles, so >> + * retrieve the count using appropriate size >> + */ >> + oproc->num_timers = of_property_count_elems_of_size(np, "timers", > > Didn't this get a ti, prefix? Yes, will change that. > And I think you should use of_count_phandle_with_args() instead. True, will fix that also. -Tero > > Regards, > Bjorn > >> + sizeof(phandle)); >> + if (oproc->num_timers <= 0) { >> + dev_dbg(&pdev->dev, "device does not have timers, status = %d\n", >> + oproc->num_timers); >> + oproc->num_timers = 0; >> + } >> + >> + if (oproc->num_timers) { >> + oproc->timers = devm_kzalloc(&pdev->dev, sizeof(*oproc->timers) >> + * oproc->num_timers, GFP_KERNEL); >> + if (!oproc->timers) { >> + ret = -ENOMEM; >> + goto free_rproc; >> + } >> + >> + dev_dbg(&pdev->dev, "device has %d tick timers\n", >> + oproc->num_timers); >> + } >> + >> ret = of_reserved_mem_device_init(&pdev->dev); >> if (ret) { >> dev_err(&pdev->dev, "device does not have specific CMA pool\n"); >> -- >> 2.17.1 >> >> -- -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c index 016d5beda195..8450dd79d391 100644 --- a/drivers/remoteproc/omap_remoteproc.c +++ b/drivers/remoteproc/omap_remoteproc.c @@ -27,6 +27,9 @@ #include <linux/regmap.h> #include <linux/mfd/syscon.h> #include <linux/reset.h> +#include <clocksource/timer-ti-dm.h> + +#include <linux/platform_data/dmtimer-omap.h> #include "omap_remoteproc.h" #include "remoteproc_internal.h" @@ -61,6 +64,16 @@ struct omap_rproc_mem { size_t size; }; +/** + * struct omap_rproc_timer - data structure for a timer used by a omap rproc + * @odt: timer pointer + * @timer_ops: OMAP dmtimer ops for @odt timer + */ +struct omap_rproc_timer { + struct omap_dm_timer *odt; + const struct omap_dm_timer_ops *timer_ops; +}; + /** * struct omap_rproc - omap remote processor state * @mbox: mailbox channel handle @@ -68,6 +81,8 @@ struct omap_rproc_mem { * @boot_data: boot data structure for setting processor boot address * @mem: internal memory regions data * @num_mems: number of internal memory regions + * @num_timers: number of rproc timer(s) + * @timers: timer(s) info used by rproc * @rproc: rproc handle * @reset: reset handle */ @@ -77,6 +92,8 @@ struct omap_rproc { struct omap_rproc_boot_data *boot_data; struct omap_rproc_mem *mem; int num_mems; + int num_timers; + struct omap_rproc_timer *timers; struct rproc *rproc; struct reset_control *reset; }; @@ -91,6 +108,212 @@ struct omap_rproc_dev_data { const char *fw_name; }; +/** + * omap_rproc_request_timer - request a timer for a remoteproc + * @np: device node pointer to the desired timer + * @timer: handle to a struct omap_rproc_timer to return the timer handle + * + * This helper function is used primarily to request a timer associated with + * a remoteproc. The returned handle is stored in the .odt field of the + * @timer structure passed in, and is used to invoke other timer specific + * ops (like starting a timer either during device initialization or during + * a resume operation, or for stopping/freeing a timer). + * + * Returns 0 on success, otherwise an appropriate failure + */ +static int omap_rproc_request_timer(struct device_node *np, + struct omap_rproc_timer *timer) +{ + int ret = 0; + + timer->odt = timer->timer_ops->request_by_node(np); + if (!timer->odt) { + pr_err("request for timer node %p failed\n", np); + return -EBUSY; + } + + ret = timer->timer_ops->set_source(timer->odt, OMAP_TIMER_SRC_SYS_CLK); + if (ret) { + pr_err("error setting OMAP_TIMER_SRC_SYS_CLK as source for timer node %p\n", + np); + timer->timer_ops->free(timer->odt); + return ret; + } + + /* clean counter, remoteproc code will set the value */ + timer->timer_ops->set_load(timer->odt, 0, 0); + + return ret; +} + +/** + * omap_rproc_start_timer - start a timer for a remoteproc + * @timer: handle to a OMAP rproc timer + * + * This helper function is used to start a timer associated with a remoteproc, + * obtained using the request_timer ops. The helper function needs to be + * invoked by the driver to start the timer (during device initialization) + * or to just resume the timer. + * + * Returns 0 on success, otherwise a failure as returned by DMTimer ops + */ +static inline int omap_rproc_start_timer(struct omap_rproc_timer *timer) +{ + return timer->timer_ops->start(timer->odt); +} + +/** + * omap_rproc_stop_timer - stop a timer for a remoteproc + * @timer: handle to a OMAP rproc timer + * + * This helper function is used to disable a timer associated with a + * remoteproc, and needs to be called either during a device shutdown + * or suspend operation. The separate helper function allows the driver + * to just stop a timer without having to release the timer during a + * suspend operation. + * + * Returns 0 on success, otherwise a failure as returned by DMTimer ops + */ +static inline int omap_rproc_stop_timer(struct omap_rproc_timer *timer) +{ + return timer->timer_ops->stop(timer->odt); +} + +/** + * omap_rproc_release_timer - release a timer for a remoteproc + * @timer: handle to a OMAP rproc timer + * + * This helper function is used primarily to release a timer associated + * with a remoteproc. The dmtimer will be available for other clients to + * use once released. + * + * Returns 0 on success, otherwise a failure as returned by DMTimer ops + */ +static inline int omap_rproc_release_timer(struct omap_rproc_timer *timer) +{ + return timer->timer_ops->free(timer->odt); +} + +/** + * omap_rproc_enable_timers - enable the timers for a remoteproc + * @rproc: handle of a remote processor + * @configure: boolean flag used to acquire and configure the timer handle + * + * This function is used primarily to enable the timers associated with + * a remoteproc. The configure flag is provided to allow the driver to + * to either acquire and start a timer (during device initialization) or + * to just start a timer (during a resume operation). + */ +static int omap_rproc_enable_timers(struct rproc *rproc, bool configure) +{ + int i; + int ret = 0; + struct platform_device *tpdev; + struct dmtimer_platform_data *tpdata; + const struct omap_dm_timer_ops *timer_ops; + struct omap_rproc *oproc = rproc->priv; + struct omap_rproc_timer *timers = oproc->timers; + struct device *dev = rproc->dev.parent; + struct device_node *np = NULL; + + if (oproc->num_timers <= 0) + return 0; + + if (!configure) + goto start_timers; + + for (i = 0; i < oproc->num_timers; i++) { + np = of_parse_phandle(dev->of_node, "timers", i); + if (!np) { + ret = -ENXIO; + dev_err(dev, "device node lookup for timer at index %d failed: %d\n", + i, ret); + goto free_timers; + } + + tpdev = of_find_device_by_node(np); + if (!tpdev) { + ret = -ENODEV; + dev_err(dev, "could not get timer platform device\n"); + goto put_node; + } + + tpdata = dev_get_platdata(&tpdev->dev); + put_device(&tpdev->dev); + if (!tpdata) { + ret = -EINVAL; + dev_err(dev, "dmtimer pdata structure NULL\n"); + goto put_node; + } + + timer_ops = tpdata->timer_ops; + if (!timer_ops || !timer_ops->request_by_node || + !timer_ops->set_source || !timer_ops->set_load || + !timer_ops->free || !timer_ops->start || + !timer_ops->stop) { + ret = -EINVAL; + dev_err(dev, "device does not have required timer ops\n"); + goto put_node; + } + + timers[i].timer_ops = timer_ops; + ret = omap_rproc_request_timer(np, &timers[i]); + if (ret) { + dev_err(dev, "request for timer %p failed: %d\n", np, + ret); + goto put_node; + } + of_node_put(np); + } + +start_timers: + for (i = 0; i < oproc->num_timers; i++) + omap_rproc_start_timer(&timers[i]); + return 0; + +put_node: + of_node_put(np); +free_timers: + while (i--) { + omap_rproc_release_timer(&timers[i]); + timers[i].odt = NULL; + timers[i].timer_ops = NULL; + } + + return ret; +} + +/** + * omap_rproc_disable_timers - disable the timers for a remoteproc + * @rproc: handle of a remote processor + * @configure: boolean flag used to release the timer handle + * + * This function is used primarily to disable the timers associated with + * a remoteproc. The configure flag is provided to allow the driver to + * to either stop and release a timer (during device shutdown) or to just + * stop a timer (during a suspend operation). + */ +static int omap_rproc_disable_timers(struct rproc *rproc, bool configure) +{ + int i; + struct omap_rproc *oproc = rproc->priv; + struct omap_rproc_timer *timers = oproc->timers; + + if (oproc->num_timers <= 0) + return 0; + + for (i = 0; i < oproc->num_timers; i++) { + omap_rproc_stop_timer(&timers[i]); + if (configure) { + omap_rproc_release_timer(&timers[i]); + timers[i].odt = NULL; + timers[i].timer_ops = NULL; + } + } + + return 0; +} + /** * omap_rproc_mbox_callback() - inbound mailbox message handler * @client: mailbox client pointer used for requesting the mailbox channel @@ -226,6 +449,12 @@ static int omap_rproc_start(struct rproc *rproc) goto put_mbox; } + ret = omap_rproc_enable_timers(rproc, true); + if (ret) { + dev_err(dev, "omap_rproc_enable_timers failed: %d\n", ret); + goto put_mbox; + } + reset_control_deassert(oproc->reset); return 0; @@ -239,9 +468,14 @@ static int omap_rproc_start(struct rproc *rproc) static int omap_rproc_stop(struct rproc *rproc) { struct omap_rproc *oproc = rproc->priv; + int ret; reset_control_assert(oproc->reset); + ret = omap_rproc_disable_timers(rproc, true); + if (ret) + return ret; + mbox_free_channel(oproc->mbox); return 0; @@ -548,6 +782,30 @@ static int omap_rproc_probe(struct platform_device *pdev) if (ret) goto free_rproc; + /* + * Timer nodes are directly used in client nodes as phandles, so + * retrieve the count using appropriate size + */ + oproc->num_timers = of_property_count_elems_of_size(np, "timers", + sizeof(phandle)); + if (oproc->num_timers <= 0) { + dev_dbg(&pdev->dev, "device does not have timers, status = %d\n", + oproc->num_timers); + oproc->num_timers = 0; + } + + if (oproc->num_timers) { + oproc->timers = devm_kzalloc(&pdev->dev, sizeof(*oproc->timers) + * oproc->num_timers, GFP_KERNEL); + if (!oproc->timers) { + ret = -ENOMEM; + goto free_rproc; + } + + dev_dbg(&pdev->dev, "device has %d tick timers\n", + oproc->num_timers); + } + ret = of_reserved_mem_device_init(&pdev->dev); if (ret) { dev_err(&pdev->dev, "device does not have specific CMA pool\n");