diff mbox series

[v2,1/3] ARM: dts: am43xx: add support for clkout1 clock

Message ID 20191112142929.23058-2-bparrot@ti.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: am43x-vpfe/ov2659.patch | expand

Commit Message

Benoit Parrot Nov. 12, 2019, 2:29 p.m. UTC
From: Tero Kristo <t-kristo@ti.com>

clkout1 clock node and its generation tree was missing. Add this based
on the data on TRM and PRCM functional spec.

commit 664ae1ab2536 ("ARM: dts: am43xx: add clkctrl nodes") effectively
reverted this commit 8010f13a40d3 ("ARM: dts: am43xx: add support for
clkout1 clock") which is needed for the ov2659 camera sensor clock
definition hence it is being re-applied here.

Note that because of the current dts node name dependency for mapping to
clock domain, we must still use "clkout1-*ck" naming instead of generic
"clock@" naming for the node. And because of this, it's probably best to
apply the dts node addition together along with the other clock changes.

Fixes: 664ae1ab2536 ("ARM: dts: am43xx: add clkctrl nodes")
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 arch/arm/boot/dts/am43xx-clocks.dtsi | 54 ++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

Comments

Tony Lindgren Nov. 12, 2019, 3:39 p.m. UTC | #1
* Benoit Parrot <bparrot@ti.com> [191112 14:30]:
> From: Tero Kristo <t-kristo@ti.com>
> 
> clkout1 clock node and its generation tree was missing. Add this based
> on the data on TRM and PRCM functional spec.
> 
> commit 664ae1ab2536 ("ARM: dts: am43xx: add clkctrl nodes") effectively
> reverted this commit 8010f13a40d3 ("ARM: dts: am43xx: add support for
> clkout1 clock") which is needed for the ov2659 camera sensor clock
> definition hence it is being re-applied here.
> 
> Note that because of the current dts node name dependency for mapping to
> clock domain, we must still use "clkout1-*ck" naming instead of generic
> "clock@" naming for the node. And because of this, it's probably best to
> apply the dts node addition together along with the other clock changes.
> 
> Fixes: 664ae1ab2536 ("ARM: dts: am43xx: add clkctrl nodes")
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> Tested-by: Benoit Parrot <bparrot@ti.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>

Hmm I don't think I did any work on this, the above should be:

Acked-by: Tony Lindgren <tony@atomide.com>

> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> ---
>  arch/arm/boot/dts/am43xx-clocks.dtsi | 54 ++++++++++++++++++++++++++++
>  1 file changed, 54 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
> index 091356f2a8c1..c726cd8dbdf1 100644
> --- a/arch/arm/boot/dts/am43xx-clocks.dtsi
> +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
> @@ -704,6 +704,60 @@
>  		ti,bit-shift = <8>;
>  		reg = <0x2a48>;
>  	};
> +
> +	clkout1_osc_div_ck: clkout1-osc-div-ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,divider-clock";
> +		clocks = <&sys_clkin_ck>;
> +		ti,bit-shift = <20>;
> +		ti,max-div = <4>;
> +		reg = <0x4100>;
> +	};
> +
> +	clkout1_src2_mux_ck: clkout1-src2-mux-ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
> +			 <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
> +			 <&dpll_mpu_m2_ck>;
> +		reg = <0x4100>;
> +	};
> +
> +	clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,divider-clock";
> +		clocks = <&clkout1_src2_mux_ck>;
> +		ti,bit-shift = <4>;
> +		ti,max-div = <8>;
> +		reg = <0x4100>;
> +	};
> +
> +	clkout1_src2_post_div_ck: clkout1-src2-post-div-ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,divider-clock";
> +		clocks = <&clkout1_src2_pre_div_ck>;
> +		ti,bit-shift = <8>;
> +		ti,max-div = <32>;
> +		ti,index-power-of-two;
> +		reg = <0x4100>;
> +	};
> +
> +	clkout1_mux_ck: clkout1-mux-ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
> +			 <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
> +		ti,bit-shift = <16>;
> +		reg = <0x4100>;
> +	};
> +
> +	clkout1_ck: clkout1-ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&clkout1_mux_ck>;
> +		ti,bit-shift = <23>;
> +		reg = <0x4100>;
> +	};
>  };
>  
>  &prcm {
> -- 
> 2.17.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index 091356f2a8c1..c726cd8dbdf1 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -704,6 +704,60 @@ 
 		ti,bit-shift = <8>;
 		reg = <0x2a48>;
 	};
+
+	clkout1_osc_div_ck: clkout1-osc-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		ti,bit-shift = <20>;
+		ti,max-div = <4>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_mux_ck: clkout1-src2-mux-ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
+			 <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
+			 <&dpll_mpu_m2_ck>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout1_src2_mux_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <8>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_post_div_ck: clkout1-src2-post-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout1_src2_pre_div_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <32>;
+		ti,index-power-of-two;
+		reg = <0x4100>;
+	};
+
+	clkout1_mux_ck: clkout1-mux-ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
+			 <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x4100>;
+	};
+
+	clkout1_ck: clkout1-ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout1_mux_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x4100>;
+	};
 };
 
 &prcm {