diff mbox series

[09/13] dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC

Message ID 20191209092147.22901-10-kishon@ti.com (mailing list archive)
State New, archived
Headers show
Series Add PCIe support to TI's J721E SoC | expand

Commit Message

Kishon Vijay Abraham I Dec. 9, 2019, 9:21 a.m. UTC
Add host mode dt-bindings for TI's J721E SoC.

Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../bindings/pci/ti,j721e-pci-host.yaml       | 161 ++++++++++++++++++
 1 file changed, 161 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml

Comments

Rob Herring (Arm) Dec. 19, 2019, 12:08 a.m. UTC | #1
On Mon, Dec 09, 2019 at 02:51:43PM +0530, Kishon Vijay Abraham I wrote:
> Add host mode dt-bindings for TI's J721E SoC.
> 
> Cc: Rob Herring <robh+dt@kernel.org>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  .../bindings/pci/ti,j721e-pci-host.yaml       | 161 ++++++++++++++++++
>  1 file changed, 161 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
> new file mode 100644
> index 000000000000..96184e1f419f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
> @@ -0,0 +1,161 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: TI J721E PCI Host (PCIe Wrapper)
> +
> +maintainers:
> +  - Kishon Vijay Abraham I <kishon@ti.com>

There's now a PCI bus schema. Reference it here:

allOf:
  - $ref: "/schemas/pci/pci-bus.yaml#"

> +
> +properties:
> +  compatible:
> +      enum:
> +          - ti,j721e-pcie-host

Indentation.

> +
> +  reg:
> +    maxItems: 4
> +
> +  reg-names:
> +    items:
> +      - const: intd_cfg
> +      - const: user_cfg
> +      - const: reg
> +      - const: cfg
> +
> +  ti,syscon-pcie-ctrl:
> +    description: Phandle to the SYSCON entry required for configuring PCIe mode
> +                 and link speed.
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/phandle

You can drop the 'allOf' here if there aren't more constraints.

> +
> +  max-link-speed:
> +    minimum: 1
> +    maximum: 3
> +
> +  num-lanes:
> +    minimum: 1
> +    maximum: 2
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +    description: clock-specifier to represent input to the PCIe
> +
> +  clock-names:
> +    items:
> +      - const: fck
> +

> +  "#address-cells":
> +    const: 3
> +
> +  "#size-cells":
> +    const: 2
> +
> +  bus-range:
> +    description: Range of bus numbers associated with this controller.

Drop these 3 as they are all standard.

> +
> +  cdns,max-outbound-regions:
> +    description: As defined in
> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/int32

Can be negative? Use uint32.

The int* definitions are kind of broken until dtc is fixed to maintain 
sign.

> +      - enum: [16]

const: 16

> +
> +  cdns,no-bar-match-nbits:
> +    description: As defined in
> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/int32
> +      - enum: [64]
> +
> +  vendor-id:
> +    const: 0x104c
> +    description: As defined in
> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt

And elsewhere. Drop the description.

> +
> +  device-id:
> +    const: 0xb00d
> +    description: As defined in
> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
> +
> +  msi-map: true
> +
> +  dma-coherent:
> +    description: Indicates that the PCIe IP block can ensure the coherency
> +
> +  ranges: true

Don't you know how many?

> +
> +  reset-gpios:
> +    description: GPIO specifier for the PERST# signal
> +
> +  phys:
> +    description: As defined in
> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
> +
> +  phy-names:
> +    description: As defined in
> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - ti,syscon-pcie-ctrl
> +  - max-link-speed
> +  - num-lanes
> +  - power-domains
> +  - clocks
> +  - clock-names

> +  - "#address-cells"
> +  - "#size-cells"

Can drop these 2. The bus schema requires them.

> +  - bus-range
> +  - cdns,max-outbound-regions
> +  - cdns,no-bar-match-nbits
> +  - vendor-id
> +  - device-id
> +  - msi-map
> +  - dma-coherent
> +  - ranges

Can drop, too.

> +  - reset-gpios

Isn't having this board dependent?

> +  - phys
> +  - phy-names
> +
> +examples:
> +  - |
> +    #include <dt-bindings/soc/ti,sci_pm_domain.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +
> +    pcie0_rc: pcie@2900000 {
> +            compatible = "ti,j721e-pcie-host";
> +            reg = <0x00 0x02900000 0x00 0x1000>,
> +                  <0x00 0x02907000 0x00 0x400>,
> +                  <0x00 0x0d000000 0x00 0x00800000>,
> +                  <0x00 0x10000000 0x00 0x00001000>;
> +            reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
> +            ti,syscon-pcie-ctrl = <&pcie0_ctrl>;
> +            max-link-speed = <3>;
> +            num-lanes = <2>;
> +            power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
> +            clocks = <&k3_clks 239 1>;
> +            clock-names = "fck";
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +            bus-range = <0x0 0xf>;
> +            cdns,max-outbound-regions = <16>;
> +            cdns,no-bar-match-nbits = <64>;
> +            vendor-id = /bits/ 16 <0x104c>;
> +            device-id = /bits/ 16 <0xb00d>;
> +            msi-map = <0x0 &gic_its 0x0 0x10000>;
> +            dma-coherent;
> +            reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
> +            phys = <&serdes0_pcie_link>;
> +            phy-names = "pcie_phy";
> +            ranges = <0x01000000 0x0 0x10001000  0x00 0x10001000  0x0 0x0010000>,
> +                     <0x02000000 0x0 0x10011000  0x00 0x10011000  0x0 0x7fef000>;
> +    };
> -- 
> 2.17.1
>
Kishon Vijay Abraham I Dec. 19, 2019, 1:13 p.m. UTC | #2
Hi,

On 19/12/19 5:38 am, Rob Herring wrote:
> On Mon, Dec 09, 2019 at 02:51:43PM +0530, Kishon Vijay Abraham I wrote:
>> Add host mode dt-bindings for TI's J721E SoC.
>>
>> Cc: Rob Herring <robh+dt@kernel.org>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>>  .../bindings/pci/ti,j721e-pci-host.yaml       | 161 ++++++++++++++++++
>>  1 file changed, 161 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
>> new file mode 100644
>> index 000000000000..96184e1f419f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
>> @@ -0,0 +1,161 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#"
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>> +
>> +title: TI J721E PCI Host (PCIe Wrapper)
>> +
>> +maintainers:
>> +  - Kishon Vijay Abraham I <kishon@ti.com>
> 
> There's now a PCI bus schema. Reference it here:
> 
> allOf:
>   - $ref: "/schemas/pci/pci-bus.yaml#"
> 
>> +
>> +properties:
>> +  compatible:
>> +      enum:
>> +          - ti,j721e-pcie-host
> 
> Indentation.
> 
>> +
>> +  reg:
>> +    maxItems: 4
>> +
>> +  reg-names:
>> +    items:
>> +      - const: intd_cfg
>> +      - const: user_cfg
>> +      - const: reg
>> +      - const: cfg
>> +
>> +  ti,syscon-pcie-ctrl:
>> +    description: Phandle to the SYSCON entry required for configuring PCIe mode
>> +                 and link speed.
>> +    allOf:
>> +      - $ref: /schemas/types.yaml#/definitions/phandle
> 
> You can drop the 'allOf' here if there aren't more constraints.
> 
>> +
>> +  max-link-speed:
>> +    minimum: 1
>> +    maximum: 3
>> +
>> +  num-lanes:
>> +    minimum: 1
>> +    maximum: 2
>> +
>> +  power-domains:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 1
>> +    description: clock-specifier to represent input to the PCIe
>> +
>> +  clock-names:
>> +    items:
>> +      - const: fck
>> +
> 
>> +  "#address-cells":
>> +    const: 3
>> +
>> +  "#size-cells":
>> +    const: 2
>> +
>> +  bus-range:
>> +    description: Range of bus numbers associated with this controller.
> 
> Drop these 3 as they are all standard.
> 
>> +
>> +  cdns,max-outbound-regions:
>> +    description: As defined in
>> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
>> +    allOf:
>> +      - $ref: /schemas/types.yaml#/definitions/int32
> 
> Can be negative? Use uint32.
> 
> The int* definitions are kind of broken until dtc is fixed to maintain 
> sign.
> 
>> +      - enum: [16]
> 
> const: 16
> 
>> +
>> +  cdns,no-bar-match-nbits:
>> +    description: As defined in
>> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
>> +    allOf:
>> +      - $ref: /schemas/types.yaml#/definitions/int32
>> +      - enum: [64]
>> +
>> +  vendor-id:
>> +    const: 0x104c
>> +    description: As defined in
>> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
> 
> And elsewhere. Drop the description.
> 
>> +
>> +  device-id:
>> +    const: 0xb00d
>> +    description: As defined in
>> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
>> +
>> +  msi-map: true
>> +
>> +  dma-coherent:
>> +    description: Indicates that the PCIe IP block can ensure the coherency
>> +
>> +  ranges: true
> 
> Don't you know how many?
> 
>> +
>> +  reset-gpios:
>> +    description: GPIO specifier for the PERST# signal
>> +
>> +  phys:
>> +    description: As defined in
>> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
>> +
>> +  phy-names:
>> +    description: As defined in
>> +                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - reg-names
>> +  - ti,syscon-pcie-ctrl
>> +  - max-link-speed
>> +  - num-lanes
>> +  - power-domains
>> +  - clocks
>> +  - clock-names
> 
>> +  - "#address-cells"
>> +  - "#size-cells"
> 
> Can drop these 2. The bus schema requires them.
> 
>> +  - bus-range
>> +  - cdns,max-outbound-regions
>> +  - cdns,no-bar-match-nbits
>> +  - vendor-id
>> +  - device-id
>> +  - msi-map
>> +  - dma-coherent
>> +  - ranges
> 
> Can drop, too.
> 
>> +  - reset-gpios
> 
> Isn't having this board dependent?

All board dts files should have it though.
I'll fix all the comments given here.

Thanks
Kishon
Kishon Vijay Abraham I Dec. 24, 2019, 8:06 a.m. UTC | #3
Hi Rob,

On 19/12/19 5:38 AM, Rob Herring wrote:
> On Mon, Dec 09, 2019 at 02:51:43PM +0530, Kishon Vijay Abraham I wrote:
>> Add host mode dt-bindings for TI's J721E SoC.
>>
>> Cc: Rob Herring <robh+dt@kernel.org>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>>  .../bindings/pci/ti,j721e-pci-host.yaml       | 161 ++++++++++++++++++
>>  1 file changed, 161 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
>> new file mode 100644
>> index 000000000000..96184e1f419f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
>> @@ -0,0 +1,161 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#"
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>> +
>> +title: TI J721E PCI Host (PCIe Wrapper)
>> +
>> +maintainers:
>> +  - Kishon Vijay Abraham I <kishon@ti.com>
> 
> There's now a PCI bus schema. Reference it here:
> 
> allOf:
>   - $ref: "/schemas/pci/pci-bus.yaml#"
> 
>> +
>> +properties:
>> +  compatible:
>> +      enum:
>> +          - ti,j721e-pcie-host
> 
> Indentation.
> 
>> +
>> +  reg:
>> +    maxItems: 4
>> +
>> +  reg-names:
>> +    items:
>> +      - const: intd_cfg
>> +      - const: user_cfg
>> +      - const: reg
>> +      - const: cfg
>> +
>> +  ti,syscon-pcie-ctrl:
>> +    description: Phandle to the SYSCON entry required for configuring PCIe mode
>> +                 and link speed.
>> +    allOf:
>> +      - $ref: /schemas/types.yaml#/definitions/phandle
> 
> You can drop the 'allOf' here if there aren't more constraints.

Do you mean I don't have to include phandle schema here? I don't seem to
be able to include $ref without allOf.

Thanks
Kishon
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
new file mode 100644
index 000000000000..96184e1f419f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
@@ -0,0 +1,161 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI J721E PCI Host (PCIe Wrapper)
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+properties:
+  compatible:
+      enum:
+          - ti,j721e-pcie-host
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: intd_cfg
+      - const: user_cfg
+      - const: reg
+      - const: cfg
+
+  ti,syscon-pcie-ctrl:
+    description: Phandle to the SYSCON entry required for configuring PCIe mode
+                 and link speed.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle
+
+  max-link-speed:
+    minimum: 1
+    maximum: 3
+
+  num-lanes:
+    minimum: 1
+    maximum: 2
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: clock-specifier to represent input to the PCIe
+
+  clock-names:
+    items:
+      - const: fck
+
+  "#address-cells":
+    const: 3
+
+  "#size-cells":
+    const: 2
+
+  bus-range:
+    description: Range of bus numbers associated with this controller.
+
+  cdns,max-outbound-regions:
+    description: As defined in
+                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/int32
+      - enum: [16]
+
+  cdns,no-bar-match-nbits:
+    description: As defined in
+                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/int32
+      - enum: [64]
+
+  vendor-id:
+    const: 0x104c
+    description: As defined in
+                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
+
+  device-id:
+    const: 0xb00d
+    description: As defined in
+                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
+
+  msi-map: true
+
+  dma-coherent:
+    description: Indicates that the PCIe IP block can ensure the coherency
+
+  ranges: true
+
+  reset-gpios:
+    description: GPIO specifier for the PERST# signal
+
+  phys:
+    description: As defined in
+                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
+
+  phy-names:
+    description: As defined in
+                 Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ti,syscon-pcie-ctrl
+  - max-link-speed
+  - num-lanes
+  - power-domains
+  - clocks
+  - clock-names
+  - "#address-cells"
+  - "#size-cells"
+  - bus-range
+  - cdns,max-outbound-regions
+  - cdns,no-bar-match-nbits
+  - vendor-id
+  - device-id
+  - msi-map
+  - dma-coherent
+  - ranges
+  - reset-gpios
+  - phys
+  - phy-names
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+
+    pcie0_rc: pcie@2900000 {
+            compatible = "ti,j721e-pcie-host";
+            reg = <0x00 0x02900000 0x00 0x1000>,
+                  <0x00 0x02907000 0x00 0x400>,
+                  <0x00 0x0d000000 0x00 0x00800000>,
+                  <0x00 0x10000000 0x00 0x00001000>;
+            reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+            ti,syscon-pcie-ctrl = <&pcie0_ctrl>;
+            max-link-speed = <3>;
+            num-lanes = <2>;
+            power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+            clocks = <&k3_clks 239 1>;
+            clock-names = "fck";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            bus-range = <0x0 0xf>;
+            cdns,max-outbound-regions = <16>;
+            cdns,no-bar-match-nbits = <64>;
+            vendor-id = /bits/ 16 <0x104c>;
+            device-id = /bits/ 16 <0xb00d>;
+            msi-map = <0x0 &gic_its 0x0 0x10000>;
+            dma-coherent;
+            reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+            phys = <&serdes0_pcie_link>;
+            phy-names = "pcie_phy";
+            ranges = <0x01000000 0x0 0x10001000  0x00 0x10001000  0x0 0x0010000>,
+                     <0x02000000 0x0 0x10011000  0x00 0x10011000  0x0 0x7fef000>;
+    };