@@ -116,6 +116,12 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
+ clk_ov5640_fixed: clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
};
&i2c1 {
@@ -317,6 +323,27 @@
};
};
+&i2c5 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ov5640@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+
+ clocks = <&clk_ov5640_fixed>;
+ clock-names = "xclk";
+
+ port {
+ csi2_cam0: endpoint {
+ remote-endpoint = <&csi2_phy0>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+};
+
&cpu0 {
vdd-supply = <&buck10_reg>;
};
@@ -447,3 +474,11 @@
max-bitrate = <5000000>;
};
};
+
+&csi2_0 {
+ csi2_phy0: endpoint {
+ remote-endpoint = <&csi2_cam0>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+};
Add device nodes for CSI2 camera board OV5640. Add the CAL port nodes with the necessary linkage to the ov5640 nodes. Signed-off-by: Benoit Parrot <bparrot@ti.com> --- arch/arm/boot/dts/dra76-evm.dts | 35 +++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)