diff mbox series

[next] ARM: dts: am437x: fix networking on boards with ksz9031 phy

Message ID 20200506190835.31342-1-grygorii.strashko@ti.com
State New, archived
Headers show
Series [next] ARM: dts: am437x: fix networking on boards with ksz9031 phy | expand

Commit Message

Grygorii Strashko May 6, 2020, 7:08 p.m. UTC
Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the
KSZ9031 PHY") the networking is broken on boards:
 am437x-gp-evm
 am437x-sk-evm
 am437x-idk-evm

All above boards have phy-mode = "rgmii" and this is worked before, because
KSZ9031 PHY started with default RGMII internal delays configuration (TX
off, RX on 1.2 ns) and MAC provided TX delay. After above commit, the
KSZ9031 PHY starts handling phy mode properly and disables RX delay, as
result networking is become broken.

Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous
behavior.

Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Philippe Schenker <philippe.schenker@toradex.com>
Fixes: commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 arch/arm/boot/dts/am437x-gp-evm.dts  | 2 +-
 arch/arm/boot/dts/am437x-idk-evm.dts | 2 +-
 arch/arm/boot/dts/am437x-sk-evm.dts  | 4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)

Comments

Oleksij Rempel May 7, 2020, 4:40 a.m. UTC | #1
Hi Grygorii,

thank you for you patches!

On Wed, May 06, 2020 at 10:08:35PM +0300, Grygorii Strashko wrote:
> Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the
> KSZ9031 PHY") the networking is broken on boards:
>  am437x-gp-evm
>  am437x-sk-evm
>  am437x-idk-evm
> 
> All above boards have phy-mode = "rgmii" and this is worked before, because
> KSZ9031 PHY started with default RGMII internal delays configuration (TX
> off, RX on 1.2 ns) and MAC provided TX delay. After above commit, the
> KSZ9031 PHY starts handling phy mode properly and disables RX delay, as
> result networking is become broken.
> 
> Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous
> behavior.
> 
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Philippe Schenker <philippe.schenker@toradex.com>
> Fixes: commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> ---
>  arch/arm/boot/dts/am437x-gp-evm.dts  | 2 +-
>  arch/arm/boot/dts/am437x-idk-evm.dts | 2 +-
>  arch/arm/boot/dts/am437x-sk-evm.dts  | 4 ++--
>  3 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
> index 811c8cae315b..d692e3b2812a 100644
> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
> @@ -943,7 +943,7 @@
>  
>  &cpsw_emac0 {
>  	phy-handle = <&ethphy0>;
> -	phy-mode = "rgmii";
> +	phy-mode = "rgmii-rxid";
>  };
>  
>  &elm {
> diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
> index 9f66f96d09c9..a7495fb364bf 100644
> --- a/arch/arm/boot/dts/am437x-idk-evm.dts
> +++ b/arch/arm/boot/dts/am437x-idk-evm.dts
> @@ -504,7 +504,7 @@
>  
>  &cpsw_emac0 {
>  	phy-handle = <&ethphy0>;
> -	phy-mode = "rgmii";
> +	phy-mode = "rgmii-id";
>  };

Do you have here really rgmii-id?


>  &rtc {
> diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
> index 25222497f828..4d5a7ca2e25d 100644
> --- a/arch/arm/boot/dts/am437x-sk-evm.dts
> +++ b/arch/arm/boot/dts/am437x-sk-evm.dts
> @@ -833,13 +833,13 @@
>  
>  &cpsw_emac0 {
>  	phy-handle = <&ethphy0>;
> -	phy-mode = "rgmii";
> +	phy-mode = "rgmii-rxid";
>  	dual_emac_res_vlan = <1>;
>  };
>  
>  &cpsw_emac1 {
>  	phy-handle = <&ethphy1>;
> -	phy-mode = "rgmii";
> +	phy-mode = "rgmii-rxid";
>  	dual_emac_res_vlan = <2>;
>  };
>  
> -- 
> 2.17.1

Regards,
Oleksij
Grygorii Strashko May 7, 2020, 3:13 p.m. UTC | #2
On 07/05/2020 07:40, Oleksij Rempel wrote:
> Hi Grygorii,
> 
> thank you for you patches!
> 
> On Wed, May 06, 2020 at 10:08:35PM +0300, Grygorii Strashko wrote:
>> Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the
>> KSZ9031 PHY") the networking is broken on boards:
>>   am437x-gp-evm
>>   am437x-sk-evm
>>   am437x-idk-evm
>>
>> All above boards have phy-mode = "rgmii" and this is worked before, because
>> KSZ9031 PHY started with default RGMII internal delays configuration (TX
>> off, RX on 1.2 ns) and MAC provided TX delay. After above commit, the
>> KSZ9031 PHY starts handling phy mode properly and disables RX delay, as
>> result networking is become broken.
>>
>> Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous
>> behavior.
>>
>> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
>> Cc: Andrew Lunn <andrew@lunn.ch>
>> Cc: Philippe Schenker <philippe.schenker@toradex.com>
>> Fixes: commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
>> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
>> ---
>>   arch/arm/boot/dts/am437x-gp-evm.dts  | 2 +-
>>   arch/arm/boot/dts/am437x-idk-evm.dts | 2 +-
>>   arch/arm/boot/dts/am437x-sk-evm.dts  | 4 ++--
>>   3 files changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
>> index 811c8cae315b..d692e3b2812a 100644
>> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
>> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
>> @@ -943,7 +943,7 @@
>>   
>>   &cpsw_emac0 {
>>   	phy-handle = <&ethphy0>;
>> -	phy-mode = "rgmii";
>> +	phy-mode = "rgmii-rxid";
>>   };
>>   
>>   &elm {
>> diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
>> index 9f66f96d09c9..a7495fb364bf 100644
>> --- a/arch/arm/boot/dts/am437x-idk-evm.dts
>> +++ b/arch/arm/boot/dts/am437x-idk-evm.dts
>> @@ -504,7 +504,7 @@
>>   
>>   &cpsw_emac0 {
>>   	phy-handle = <&ethphy0>;
>> -	phy-mode = "rgmii";
>> +	phy-mode = "rgmii-id";
>>   };
> 
> Do you have here really rgmii-id?
> 

Right, thanks you.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 811c8cae315b..d692e3b2812a 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -943,7 +943,7 @@ 
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 };
 
 &elm {
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 9f66f96d09c9..a7495fb364bf 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -504,7 +504,7 @@ 
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &rtc {
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 25222497f828..4d5a7ca2e25d 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -833,13 +833,13 @@ 
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	dual_emac_res_vlan = <2>;
 };