| Message ID | 20200907202125.22943-4-grygorii.strashko@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: am57xx/dra7x: switch to new cpsw switch drv | expand |
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index b3a0206ebd6c..79338fb7dbee 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -451,7 +451,7 @@ <&dra7_pmx_core 0x3f8>; }; -&davinci_mdio { +&davinci_mdio_sw { phy0: ethernet-phy@1 { reg = <1>; }; @@ -461,21 +461,20 @@ }; }; -&mac { +&mac_sw { status = "okay"; - dual_emac; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <&phy0>; phy-mode = "rgmii-rxid"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <&phy1>; phy-mode = "rgmii-rxid"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; &mmc1 {
Switch all TI AM5728 BeagleBoard-X15 boards to use new cpsw switch driver. Those boards have 2 Ext. port wired and configured in dual_mac mode by default. Hence, dual_mac mode has been preserved the same way between legacy and new driver it's safe to switch drivers. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)