diff mbox series

omap3: enable off mode automatically

Message ID 20200911064924.26281-1-andreas@kemnade.info (mailing list archive)
State New, archived
Headers show
Series omap3: enable off mode automatically | expand

Commit Message

Andreas Kemnade Sept. 11, 2020, 6:49 a.m. UTC
Enabling off mode was only reachable deeply hidden
in the debugfs. As powersaving is an important feature,
move the option out of its shady place.
The debugfs file can still be used to override the default.

Use the presence of a device compatible to ti,twl4030-idle or
ti,twl4030-idle-osc-off as an indicator that the board is wired correctly
for off mode.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
An earlier version of this patch was here:
https://patchwork.kernel.org/patch/10794121/

A config option was used instead of the suggested devicetree check.

 arch/arm/mach-omap2/pm.h     |  4 ----
 arch/arm/mach-omap2/pm34xx.c | 29 ++++++++++++++++++++++++++++-
 2 files changed, 28 insertions(+), 5 deletions(-)

Comments

Tony Lindgren Sept. 11, 2020, 10:33 a.m. UTC | #1
* Andreas Kemnade <andreas@kemnade.info> [200911 09:50]:
> --- a/arch/arm/mach-omap2/pm.h
> +++ b/arch/arm/mach-omap2/pm.h
> @@ -49,11 +49,7 @@ static inline int omap4_opp_init(void)
>  extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
>  extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
>  
> -#ifdef CONFIG_PM_DEBUG
>  extern u32 enable_off_mode;
> -#else
> -#define enable_off_mode 0
> -#endif

Hmm isn't the above still needed for the other SoCs? Or is omap3 the only
user?

Otherwise looks good to me :)

Tony
Andreas Kemnade Sept. 11, 2020, 2:27 p.m. UTC | #2
On Fri, 11 Sep 2020 13:33:37 +0300
Tony Lindgren <tony@atomide.com> wrote:

> * Andreas Kemnade <andreas@kemnade.info> [200911 09:50]:
> > --- a/arch/arm/mach-omap2/pm.h
> > +++ b/arch/arm/mach-omap2/pm.h
> > @@ -49,11 +49,7 @@ static inline int omap4_opp_init(void)
> >  extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
> >  extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
> >  
> > -#ifdef CONFIG_PM_DEBUG
> >  extern u32 enable_off_mode;
> > -#else
> > -#define enable_off_mode 0
> > -#endif  
> 
> Hmm isn't the above still needed for the other SoCs? Or is omap3 the only
> user?
> 
well, the linker moans about undefined symbols if
CONFIG_ARCH_OMAP3 is not enabled.
I will send a v2.

Regards,
Andreas
diff mbox series

Patch

diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 2a883a0c1fcd..80e84ae66aee 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -49,11 +49,7 @@  static inline int omap4_opp_init(void)
 extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
 extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
 
-#ifdef CONFIG_PM_DEBUG
 extern u32 enable_off_mode;
-#else
-#define enable_off_mode 0
-#endif
 
 #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
 extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index f5dfddf492e2..d069d581c372 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -25,6 +25,7 @@ 
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/of.h>
 #include <linux/omap-gpmc.h>
 
 #include <trace/events/power.h>
@@ -51,6 +52,10 @@ 
 /* pm34xx errata defined in pm.h */
 u16 pm34xx_errata;
 
+#ifndef CONFIG_PM_DEBUG
+u32 enable_off_mode;
+#endif
+
 struct power_state {
 	struct powerdomain *pwrdm;
 	u32 next_state;
@@ -410,7 +415,12 @@  static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 	if (!pwrst)
 		return -ENOMEM;
 	pwrst->pwrdm = pwrdm;
-	pwrst->next_state = PWRDM_POWER_RET;
+
+	if (enable_off_mode)
+		pwrst->next_state = PWRDM_POWER_OFF;
+	else
+		pwrst->next_state = PWRDM_POWER_RET;
+
 	list_add(&pwrst->node, &pwrst_list);
 
 	if (pwrdm_has_hdwr_sar(pwrdm))
@@ -444,6 +454,21 @@  static void __init pm_errata_configure(void)
 	}
 }
 
+static void __init omap3_pm_check_pmic(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "ti,twl4030-power-idle");
+	if (!np)
+		np = of_find_compatible_node(NULL, NULL, "ti,twl4030-power-idle-osc-off");
+
+	if (np) {
+		of_node_put(np);
+		enable_off_mode = 1;
+	} else
+		enable_off_mode = 0;
+}
+
 int __init omap3_pm_init(void)
 {
 	struct power_state *pwrst, *tmp;
@@ -477,6 +502,8 @@  int __init omap3_pm_init(void)
 		goto err2;
 	}
 
+	omap3_pm_check_pmic();
+
 	ret = pwrdm_for_each(pwrdms_setup, NULL);
 	if (ret) {
 		pr_err("Failed to setup powerdomains\n");