diff mbox series

[v3,06/15] arm64: dts: ti: align GPIO hog names with dtschema

Message ID 20200916155715.21009-7-krzk@kernel.org (mailing list archive)
State New
Headers show
Series ARM: dts: / gpio: Add dtschema for NXP PCA953x and correct dts | expand

Commit Message

Krzysztof Kozlowski Sept. 16, 2020, 3:57 p.m. UTC
The convention for node names is to use hyphens, not underscores.
dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Nishanth Menon Sept. 25, 2020, 12:01 p.m. UTC | #1
On 17:57-20200916, Krzysztof Kozlowski wrote:
> The convention for node names is to use hyphens, not underscores.
> dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 

Applied to ti-k3-dts-next with minor update to $subject (added
'k3-j721e-common-proc-board:')
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 648267284582..456e7818b521 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -407,7 +407,7 @@ 
 		gpio-controller;
 		#gpio-cells = <2>;
 
-		p09 {
+		p09-hog {
 			/* P11 - MCASP/TRACE_MUX_S0 */
 			gpio-hog;
 			gpios = <9 GPIO_ACTIVE_HIGH>;
@@ -415,7 +415,7 @@ 
 			line-name = "MCASP/TRACE_MUX_S0";
 		};
 
-		p10 {
+		p10-hog {
 			/* P12 - MCASP/TRACE_MUX_S1 */
 			gpio-hog;
 			gpios = <10 GPIO_ACTIVE_HIGH>;