diff mbox series

[05/18] ARM: dts: Configure interconnect target module for am3 wkup_m3

Message ID 20201026112222.56894-6-tony@atomide.com (mailing list archive)
State New
Headers show
Series Drop remaining pdata for am335x and use genpd | expand

Commit Message

Tony Lindgren Oct. 26, 2020, 11:22 a.m. UTC
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver.

Note that we no longer need ti,no-reset-on-init as the rstctrl resets
are properly handled by the reset driver and claimed by the RTC driver.
And we need to squash together the module ranges for driver compability.

Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/am33xx-l4.dtsi | 23 ++++++++++++++---------
 arch/arm/boot/dts/am33xx.dtsi    |  8 --------
 2 files changed, 14 insertions(+), 17 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -32,20 +32,25 @@  segment@100000 {					/* 0x44d00000 */
 
 		target-module@0 {			/* 0x44d00000, ap 4 28.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "wkup_m3";
 			reg = <0x0 0x4>;
 			reg-names = "rev";
+			clocks = <&l4_wkup_aon_clkctrl AM3_L4_WKUP_AON_WKUP_M3_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0x0 0x0 0x4000>;
-			status = "disabled";
-		};
+			ranges = <0x00000000 0x00000000 0x4000>,
+				 <0x00080000 0x00080000 0x2000>;
 
-		target-module@80000 {			/* 0x44d80000, ap 6 10.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x80000 0x2000>;
+			wkup_m3: cpu@0 {
+				compatible = "ti,am3352-wkup-m3";
+				reg = <0x00000000 0x4000>,
+				      <0x00080000 0x2000>;
+				reg-names = "umem", "dmem";
+				resets = <&prm_wkup 3>;
+				reset-names = "rstctrl";
+				ti,pm-firmware = "am335x-pm-firmware.elf";
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -180,14 +180,6 @@  ocp: ocp {
 		ti,hwmods = "l3_main";
 
 		l4_wkup: interconnect@44c00000 {
-			wkup_m3: wkup_m3@100000 {
-				compatible = "ti,am3352-wkup-m3";
-				reg = <0x100000 0x4000>,
-				      <0x180000 0x2000>;
-				reg-names = "umem", "dmem";
-				ti,hwmods = "wkup_m3";
-				ti,pm-firmware = "am335x-pm-firmware.elf";
-			};
 		};
 		l4_per: interconnect@48000000 {
 		};