@@ -204,7 +204,7 @@
#clock-cells = <0>;
compatible = "ti,am3-dpll-core-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
- reg = <0x2d20>, <0x2d24>, <0x2d2c>;
+ reg = <0x2d20>, <0x2d24>, <0x2d2c>, <0x2d48>, <0x2d4c>;
};
dpll_core_x2_ck: dpll_core_x2_ck {
@@ -250,7 +250,7 @@
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
- reg = <0x2d60>, <0x2d64>, <0x2d6c>;
+ reg = <0x2d60>, <0x2d64>, <0x2d6c>, <0x2d88>, <0x2d8c>;
};
dpll_mpu_m2_ck: dpll_mpu_m2_ck@2d70 {
@@ -276,7 +276,7 @@
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
- reg = <0x2da0>, <0x2da4>, <0x2dac>;
+ reg = <0x2da0>, <0x2da4>, <0x2dac>, <0x2dc8>, <0x2dcc>;
};
dpll_ddr_m2_ck: dpll_ddr_m2_ck@2db0 {
@@ -294,7 +294,7 @@
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
- reg = <0x2e20>, <0x2e24>, <0x2e2c>;
+ reg = <0x2e20>, <0x2e24>, <0x2e2c>, <0x2e48>, <0x2e4c>;
};
dpll_disp_m2_ck: dpll_disp_m2_ck@2e30 {
@@ -313,7 +313,7 @@
#clock-cells = <0>;
compatible = "ti,am3-dpll-j-type-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
- reg = <0x2de0>, <0x2de4>, <0x2dec>;
+ reg = <0x2de0>, <0x2de4>, <0x2dec>, <0x2e08>, <0x2e0c>;
};
dpll_per_m2_ck: dpll_per_m2_ck@2df0 {
@@ -557,7 +557,7 @@
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
- reg = <0x2e60>, <0x2e64>, <0x2e6c>;
+ reg = <0x2e60>, <0x2e64>, <0x2e6c>, <0x2e88>, <0x2e8c>;
};
dpll_extdev_m2_ck: dpll_extdev_m2_ck@2e70 {
Registers for adjusting the spread spectrum clocking (SSC) have been added. As reported by the TI spruhl7x RM, SSC is supported only for LCD and MPU PLLs, but the PRCM_CM_SSC_DELTAMSTEP_DPLL_XXX and PRCM_CM_SSC_MODFREQDIV_DPLL_XXX registers, as well as the enable field in the PRCM_CM_CLKMODE_DPLL_XXX registers are mapped for all PLLs (CORE, MPU, DDR, PER, DISP, EXTDEV). Signed-off-by: Dario Binacchi <dariobin@libero.it> --- (no changes since v1) arch/arm/boot/dts/am43xx-clocks.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)