diff mbox series

ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configured

Message ID 20210525093311.15510-1-tony@atomide.com (mailing list archive)
State New
Headers show
Series ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configured | expand

Commit Message

Tony Lindgren May 25, 2021, 9:33 a.m. UTC
If the PM related modules are not loaded and PM firmware not configured,
the system suspend fails to resume. Let's fix this by adding initial
platform_suspend_ops to block suspend and warn about missing modules.

When pm33xx and wkup_m3_ipc have been loaded and m3 coprocessor booted
with it's firmware, pm33xx sets up working platform_suspend_ops. Note
that we need to configure at least PM_SUSPEND_STANDBY to have
suspend_set_ops().

Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---

Dave, this prevents system suspend if pm33xx or IPC or firmware is not
configured as otherwise resume will hang. Do you have any better ideas?

---
 arch/arm/mach-omap2/pm33xx-core.c | 40 +++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c
--- a/arch/arm/mach-omap2/pm33xx-core.c
+++ b/arch/arm/mach-omap2/pm33xx-core.c
@@ -8,6 +8,7 @@ 
 
 #include <linux/cpuidle.h>
 #include <linux/platform_data/pm33xx.h>
+#include <linux/suspend.h>
 #include <asm/cpuidle.h>
 #include <asm/smp_scu.h>
 #include <asm/suspend.h>
@@ -324,6 +325,44 @@  static struct am33xx_pm_platform_data *am33xx_pm_get_pdata(void)
 		return NULL;
 }
 
+#ifdef CONFIG_SUSPEND
+/*
+ * Block system suspend initially. Later on pm33xx sets up it's own
+ * platform_suspend_ops after probe. That depends also on loaded
+ * wkup_m3_ipc and booted am335x-pm-firmware.elf.
+ */
+static int amx3_suspend_block(suspend_state_t state)
+{
+	pr_warn("PM not initialized for pm33xx, wkup_m3_ipc, or am335x-pm-firmware.elf\n");
+
+	return -EINVAL;
+}
+
+static int amx3_pm_valid(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static const struct platform_suspend_ops amx3_blocked_pm_ops = {
+	.begin = amx3_suspend_block,
+	.valid = amx3_pm_valid,
+};
+
+static void __init amx3_block_suspend(void)
+{
+	suspend_set_ops(&amx3_blocked_pm_ops);
+}
+#else
+static inline void amx3_block_suspend(void)
+{
+}
+#endif	/* CONFIG_SUSPEND */
+
 int __init amx3_common_pm_init(void)
 {
 	struct am33xx_pm_platform_data *pdata;
@@ -337,6 +376,7 @@  int __init amx3_common_pm_init(void)
 	devinfo.size_data = sizeof(*pdata);
 	devinfo.id = -1;
 	platform_device_register_full(&devinfo);
+	amx3_block_suspend();
 
 	return 0;
 }