diff mbox series

[v2] ARM: dts: am335x-bone: switch to new cpsw switch drv

Message ID 20210805230956.7379-1-grygorii.strashko@ti.com (mailing list archive)
State New, archived
Headers show
Series [v2] ARM: dts: am335x-bone: switch to new cpsw switch drv | expand

Commit Message

Grygorii Strashko Aug. 5, 2021, 11:09 p.m. UTC
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.

So, Switch BeagleBone boards to use new cpsw switch driver. Those boards
have or 2 Ext. port wired and configured in dual_mac mode by default, or
only 1 Ext. port.

For am335x-sancloud-bbe-common.dtsi also removed duplicated davinci_mdio DT
nodes which already defined in am335x-bone-common.dtsi.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---

changes in v2:
 - commit message updated to indicate duplicated nodes removal in am335x-sancloud-bbe-common.dtsi
 - dropped phy-handle for cpsw port in am335x-sancloud-bbe-common.dtsi

 arch/arm/boot/dts/am335x-bone-common.dtsi     | 13 ++++---
 .../boot/dts/am335x-boneblack-wireless.dts    |  2 +-
 .../boot/dts/am335x-bonegreen-wireless.dts    |  2 +-
 .../boot/dts/am335x-sancloud-bbe-common.dtsi  | 34 ++-----------------
 4 files changed, 12 insertions(+), 39 deletions(-)

Comments

Tony Lindgren Aug. 6, 2021, 6:31 a.m. UTC | #1
* Grygorii Strashko <grygorii.strashko@ti.com> [210806 02:10]:
> The dual_mac mode has been preserved the same way between legacy and new
> driver, and one port devices works the same as 1 dual_mac port - it's safe
> to switch drivers.
> 
> So, Switch BeagleBone boards to use new cpsw switch driver. Those boards
> have or 2 Ext. port wired and configured in dual_mac mode by default, or
> only 1 Ext. port.
> 
> For am335x-sancloud-bbe-common.dtsi also removed duplicated davinci_mdio DT
> nodes which already defined in am335x-bone-common.dtsi.

Applying this too into omap-for-v5.15/dt.

Regards,

Tony
Paul Barker Aug. 6, 2021, 7:12 a.m. UTC | #2
On Fri, 6 Aug 2021 02:09:56 +0300
Grygorii Strashko <grygorii.strashko@ti.com> wrote:

> The dual_mac mode has been preserved the same way between legacy and new
> driver, and one port devices works the same as 1 dual_mac port - it's safe
> to switch drivers.
> 
> So, Switch BeagleBone boards to use new cpsw switch driver. Those boards
> have or 2 Ext. port wired and configured in dual_mac mode by default, or
> only 1 Ext. port.
> 
> For am335x-sancloud-bbe-common.dtsi also removed duplicated davinci_mdio DT
> nodes which already defined in am335x-bone-common.dtsi.
> 
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> ---
> 
> changes in v2:
>  - commit message updated to indicate duplicated nodes removal in am335x-sancloud-bbe-common.dtsi
>  - dropped phy-handle for cpsw port in am335x-sancloud-bbe-common.dtsi

Thanks for the quick response to my feedback.

Reviewed-by: Paul Barker <paul.barker@sancloud.com>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 34a0045b5f65..0ccdc7cd463b 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -353,24 +353,27 @@ 
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "mii";
+	ti,dual-emac-pvid = <1>;
 };
 
-&mac {
-	slaves = <1>;
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
 		reg = <0>;
diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
index 8b2b24c80670..c72b09ab8da0 100644
--- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts
+++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
@@ -63,7 +63,7 @@ 
 	};
 };
 
-&mac {
+&mac_sw {
 	status = "disabled";
 };
 
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
index 74db0fc39397..215f279e476b 100644
--- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
@@ -62,7 +62,7 @@ 
 	};
 };
 
-&mac {
+&mac_sw {
 	status = "disabled";
 };
 
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi b/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi
index bd9c21813192..627c18d23f94 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi
@@ -40,22 +40,6 @@ 
 		>;
 	};
 
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
 	usb_hub_ctrl: usb_hub_ctrl {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)     /* rmii1_refclk.gpio0_29 */
@@ -63,26 +47,12 @@ 
 	};
 };
 
-&mac {
-	pinctrl-names = "default", "sleep";
+&mac_sw {
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
 };
 
-&cpsw_emac0 {
-	phy-handle = <&ethphy0>;
+&cpsw_port1 {
 	phy-mode = "rgmii-id";
 };