| Message ID | 20210825152518.379386-14-miquel.raynal@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | TI AM437X ADC1 | expand |
On Wed, 25 Aug 2021 17:24:51 +0200 Miquel Raynal <miquel.raynal@bootlin.com> wrote: > The comment misses the main information which is that we assume that a > sample takes 15 ADC clock cycles to be generated. Let's take the > occasion to rework a little bit this comment. > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Fair enough. It does seem a little clearer to me after your rewording. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > --- > drivers/mfd/ti_am335x_tscadc.c | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) > > diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c > index 0fef35e1e64b..3afe22680973 100644 > --- a/drivers/mfd/ti_am335x_tscadc.c > +++ b/drivers/mfd/ti_am335x_tscadc.c > @@ -195,12 +195,12 @@ static int ti_tscadc_probe(struct platform_device *pdev) > pm_runtime_get_sync(&pdev->dev); > > /* > - * The TSC_ADC_Subsystem has 2 clock domains > - * OCP_CLK and ADC_CLK. > - * The ADC clock is expected to run at target of 3MHz, > - * and expected to capture 12-bit data at a rate of 200 KSPS. > - * The TSC_ADC_SS controller design assumes the OCP clock is > - * at least 6x faster than the ADC clock. > + * The TSC_ADC_Subsystem has 2 clock domains: OCP_CLK and ADC_CLK. > + * ADCs produce a 12-bit sample every 15 ADC_CLK cycles. > + * am33xx ADCs expect to capture 200ksps. > + * We need the ADC clocks to run at 3MHz. > + * This frequency is valid since TSC_ADC_SS controller design > + * assumes the OCP clock is at least 6x faster than the ADC clock. > */ > clk = devm_clk_get(&pdev->dev, "adc_tsc_fck"); > if (IS_ERR(clk)) {
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c index 0fef35e1e64b..3afe22680973 100644 --- a/drivers/mfd/ti_am335x_tscadc.c +++ b/drivers/mfd/ti_am335x_tscadc.c @@ -195,12 +195,12 @@ static int ti_tscadc_probe(struct platform_device *pdev) pm_runtime_get_sync(&pdev->dev); /* - * The TSC_ADC_Subsystem has 2 clock domains - * OCP_CLK and ADC_CLK. - * The ADC clock is expected to run at target of 3MHz, - * and expected to capture 12-bit data at a rate of 200 KSPS. - * The TSC_ADC_SS controller design assumes the OCP clock is - * at least 6x faster than the ADC clock. + * The TSC_ADC_Subsystem has 2 clock domains: OCP_CLK and ADC_CLK. + * ADCs produce a 12-bit sample every 15 ADC_CLK cycles. + * am33xx ADCs expect to capture 200ksps. + * We need the ADC clocks to run at 3MHz. + * This frequency is valid since TSC_ADC_SS controller design + * assumes the OCP clock is at least 6x faster than the ADC clock. */ clk = devm_clk_get(&pdev->dev, "adc_tsc_fck"); if (IS_ERR(clk)) {
The comment misses the main information which is that we assume that a sample takes 15 ADC clock cycles to be generated. Let's take the occasion to rework a little bit this comment. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/mfd/ti_am335x_tscadc.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)