diff mbox series

[v3,30/47] mfd: ti_am335x_tscadc: Add TSC prefix in certain macros

Message ID 20210915155908.476767-31-miquel.raynal@bootlin.com (mailing list archive)
State New, archived
Headers show
Series TI AM437X ADC1 | expand

Commit Message

Miquel Raynal Sept. 15, 2021, 3:58 p.m. UTC
While the register list (and names) between ADC0 and ADC1 are pretty
close, the bits inside changed a little bit. To avoid any future
confusion, let's add the TSC prefix when some bits are in a register
that is common to both revisions of the ADC, but are specific to the
am33xx hardware.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c       | 10 +++++-----
 include/linux/mfd/ti_am335x_tscadc.h | 14 +++++++-------
 2 files changed, 12 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 53a6686a4c5d..5242857993bc 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -222,13 +222,13 @@  static	int ti_tscadc_probe(struct platform_device *pdev)
 	 * of the CTRL register but not the subsystem enable bit which must be
 	 * added manually when timely.
 	 */
-	tscadc->ctrl = CNTRLREG_STEPCONFIGWRT | CNTRLREG_STEPID;
+	tscadc->ctrl = CNTRLREG_TSC_STEPCONFIGWRT | CNTRLREG_STEPID;
 	if (tsc_wires > 0) {
-		tscadc->ctrl |= CNTRLREG_TSCENB;
+		tscadc->ctrl |= CNTRLREG_TSC_ENB;
 		if (tsc_wires == 5)
-			tscadc->ctrl |= CNTRLREG_5WIRE;
+			tscadc->ctrl |= CNTRLREG_TSC_5WIRE;
 		else
-			tscadc->ctrl |= CNTRLREG_4WIRE;
+			tscadc->ctrl |= CNTRLREG_TSC_4WIRE;
 	}
 	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
 
@@ -328,7 +328,7 @@  static const struct ti_tscadc_data tscdata = {
 	.compat_tscmag = "ti,am3359-tsc",
 	.name_adc = "TI-am335x-adc",
 	.compat_adc = "ti,am3359-adc",
-	.target_clk_rate = ADC_CLK,
+	.target_clk_rate = TSC_ADC_CLK,
 };
 
 static const struct of_device_id ti_tscadc_dt_ids[] = {
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index 5546a779e6ad..26f3055635ac 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -98,13 +98,13 @@ 
 /* Control register */
 #define CNTRLREG_SSENB		BIT(0)
 #define CNTRLREG_STEPID		BIT(1)
-#define CNTRLREG_STEPCONFIGWRT	BIT(2)
+#define CNTRLREG_TSC_STEPCONFIGWRT BIT(2)
 #define CNTRLREG_POWERDOWN	BIT(4)
-#define CNTRLREG_AFE_CTRL(val)	FIELD_PREP(GENMASK(6, 5), (val))
-#define CNTRLREG_4WIRE		CNTRLREG_AFE_CTRL(1)
-#define CNTRLREG_5WIRE		CNTRLREG_AFE_CTRL(2)
-#define CNTRLREG_8WIRE		CNTRLREG_AFE_CTRL(3)
-#define CNTRLREG_TSCENB		BIT(7)
+#define CNTRLREG_TSC_AFE_CTRL(val) FIELD_PREP(GENMASK(6, 5), (val))
+#define CNTRLREG_TSC_4WIRE	CNTRLREG_TSC_AFE_CTRL(1)
+#define CNTRLREG_TSC_5WIRE	CNTRLREG_TSC_AFE_CTRL(2)
+#define CNTRLREG_TSC_8WIRE	CNTRLREG_TSC_AFE_CTRL(3)
+#define CNTRLREG_TSC_ENB	BIT(7)
 
 /* FIFO READ Register */
 #define FIFOREAD_DATA_MASK	GENMASK(11, 0)
@@ -118,7 +118,7 @@ 
 #define SEQ_STATUS		BIT(5)
 #define CHARGE_STEP		0x11
 
-#define ADC_CLK			(3 * HZ_PER_MHZ)
+#define TSC_ADC_CLK		(3 * HZ_PER_MHZ)
 #define TOTAL_STEPS		16
 #define TOTAL_CHANNELS		8
 #define FIFO1_THRESHOLD		19