| Message ID | 20221021081612.591613-3-benedikt.niedermayr@siemens.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | gpmc wait pin additions | expand |
On Fri, 21 Oct 2022 10:16:12 +0200, B. Niedermayr wrote: > From: Benedikt Niedermayr <benedikt.niedermayr@siemens.com> > > The GPMC controller has the ability to configure the polarity for the > wait pin. The current properties do not allow this configuration. > This binding directly configures the WAITPIN<X>POLARITY bit > in the GPMC_CONFIG register by setting the "ti,wait-pin-polarity" > dt-property. > > Signed-off-by: Benedikt Niedermayr <benedikt.niedermayr@siemens.com> > --- > .../bindings/memory-controllers/ti,gpmc-child.yaml | 7 +++++++ > 1 file changed, 7 insertions(+) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml index 6e3995bb1630..4a257fac577e 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml @@ -230,6 +230,13 @@ properties: Wait-pin used by client. Must be less than "gpmc,num-waitpins". $ref: /schemas/types.yaml#/definitions/uint32 + ti,wait-pin-polarity: + description: | + Set the desired polarity for the selected wait pin. + 0 for active low, 1 for active high. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + gpmc,wait-on-read: description: Enables wait monitoring on reads. type: boolean