diff mbox series

[v7,3/5] PCI: j721e: Add PCIe 4x lane selection support

Message ID 20221124081221.1206167-4-mranostay@ti.com (mailing list archive)
State New, archived
Headers show
Series PCI: add 4x lane support for pci-j721e controllers | expand

Commit Message

Matt Ranostay Nov. 24, 2022, 8:12 a.m. UTC
Add support for setting of two-bit field that allows selection of 4x lane
PCIe which was previously limited to only 2x lanes.

Signed-off-by: Matt Ranostay <mranostay@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
---
 drivers/pci/controller/cadence/pci-j721e.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

Comments

Roger Quadros Nov. 25, 2022, 12:31 p.m. UTC | #1
On 24/11/2022 10:12, Matt Ranostay wrote:
> Add support for setting of two-bit field that allows selection of 4x lane
> PCIe which was previously limited to only 2x lanes.
> 
> Signed-off-by: Matt Ranostay <mranostay@ti.com>
> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
> ---
>  drivers/pci/controller/cadence/pci-j721e.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
> index 8990f58d64d5..dab3db9be6d8 100644
> --- a/drivers/pci/controller/cadence/pci-j721e.c
> +++ b/drivers/pci/controller/cadence/pci-j721e.c
> @@ -42,7 +42,6 @@ enum link_status {
>  };
>  
>  #define J721E_MODE_RC			BIT(7)
> -#define LANE_COUNT_MASK			BIT(8)
>  #define LANE_COUNT(n)			((n) << 8)
>  
>  #define GENERATION_SEL_MASK		GENMASK(1, 0)
> @@ -52,6 +51,7 @@ struct j721e_pcie {
>  	struct clk		*refclk;
>  	u32			mode;
>  	u32			num_lanes;
> +	u32			max_lanes;
>  	void __iomem		*user_cfg_base;
>  	void __iomem		*intd_cfg_base;
>  	u32			linkdown_irq_regfield;
> @@ -205,11 +205,15 @@ static int j721e_pcie_set_lane_count(struct j721e_pcie *pcie,
>  {
>  	struct device *dev = pcie->cdns_pcie->dev;
>  	u32 lanes = pcie->num_lanes;
> +	u32 mask = GENMASK(8, 8);

u32 mask = BIT(8);

>  	u32 val = 0;
>  	int ret;
>  
> +	if (pcie->max_lanes == 4)
> +		mask = GENMASK(9, 8);
> +
>  	val = LANE_COUNT(lanes - 1);
> -	ret = regmap_update_bits(syscon, offset, LANE_COUNT_MASK, val);
> +	ret = regmap_update_bits(syscon, offset, mask, val);
>  	if (ret)
>  		dev_err(dev, "failed to set link count\n");
>  
> @@ -439,6 +443,8 @@ static int j721e_pcie_probe(struct platform_device *pdev)
>  	ret = of_property_read_u32(node, "num-lanes", &num_lanes);
>  	if (ret || num_lanes > data->max_lanes)
>  		num_lanes = 1;
> +
> +	pcie->max_lanes = data->max_lanes;
>  	pcie->num_lanes = num_lanes;
>  
>  	if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(48)))

Reviewed-by: Roger Quadros <rogerq@kernel.org>

cheers,
-roger
Lorenzo Pieralisi Feb. 2, 2023, 4:09 p.m. UTC | #2
Hi Rob,

I think your comment:

https://lore.kernel.org/linux-pci/CAL_JsqJ5cOLXhD-73esmhVwMEWGT+w3SJC14Z0jY4tQJQRA7iw@mail.gmail.com

was related to the commit log wording and not necessarily
the actual diff. Please let me know if you are happy with
this change and I shall merge the series.

Thanks,
Lorenzo

On Thu, Nov 24, 2022 at 12:12:19AM -0800, Matt Ranostay wrote:
> Add support for setting of two-bit field that allows selection of 4x lane
> PCIe which was previously limited to only 2x lanes.
> 
> Signed-off-by: Matt Ranostay <mranostay@ti.com>
> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
> ---
>  drivers/pci/controller/cadence/pci-j721e.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
> index 8990f58d64d5..dab3db9be6d8 100644
> --- a/drivers/pci/controller/cadence/pci-j721e.c
> +++ b/drivers/pci/controller/cadence/pci-j721e.c
> @@ -42,7 +42,6 @@ enum link_status {
>  };
>  
>  #define J721E_MODE_RC			BIT(7)
> -#define LANE_COUNT_MASK			BIT(8)
>  #define LANE_COUNT(n)			((n) << 8)
>  
>  #define GENERATION_SEL_MASK		GENMASK(1, 0)
> @@ -52,6 +51,7 @@ struct j721e_pcie {
>  	struct clk		*refclk;
>  	u32			mode;
>  	u32			num_lanes;
> +	u32			max_lanes;
>  	void __iomem		*user_cfg_base;
>  	void __iomem		*intd_cfg_base;
>  	u32			linkdown_irq_regfield;
> @@ -205,11 +205,15 @@ static int j721e_pcie_set_lane_count(struct j721e_pcie *pcie,
>  {
>  	struct device *dev = pcie->cdns_pcie->dev;
>  	u32 lanes = pcie->num_lanes;
> +	u32 mask = GENMASK(8, 8);
>  	u32 val = 0;
>  	int ret;
>  
> +	if (pcie->max_lanes == 4)
> +		mask = GENMASK(9, 8);
> +
>  	val = LANE_COUNT(lanes - 1);
> -	ret = regmap_update_bits(syscon, offset, LANE_COUNT_MASK, val);
> +	ret = regmap_update_bits(syscon, offset, mask, val);
>  	if (ret)
>  		dev_err(dev, "failed to set link count\n");
>  
> @@ -439,6 +443,8 @@ static int j721e_pcie_probe(struct platform_device *pdev)
>  	ret = of_property_read_u32(node, "num-lanes", &num_lanes);
>  	if (ret || num_lanes > data->max_lanes)
>  		num_lanes = 1;
> +
> +	pcie->max_lanes = data->max_lanes;
>  	pcie->num_lanes = num_lanes;
>  
>  	if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(48)))
> -- 
> 2.38.GIT
>
diff mbox series

Patch

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 8990f58d64d5..dab3db9be6d8 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -42,7 +42,6 @@  enum link_status {
 };
 
 #define J721E_MODE_RC			BIT(7)
-#define LANE_COUNT_MASK			BIT(8)
 #define LANE_COUNT(n)			((n) << 8)
 
 #define GENERATION_SEL_MASK		GENMASK(1, 0)
@@ -52,6 +51,7 @@  struct j721e_pcie {
 	struct clk		*refclk;
 	u32			mode;
 	u32			num_lanes;
+	u32			max_lanes;
 	void __iomem		*user_cfg_base;
 	void __iomem		*intd_cfg_base;
 	u32			linkdown_irq_regfield;
@@ -205,11 +205,15 @@  static int j721e_pcie_set_lane_count(struct j721e_pcie *pcie,
 {
 	struct device *dev = pcie->cdns_pcie->dev;
 	u32 lanes = pcie->num_lanes;
+	u32 mask = GENMASK(8, 8);
 	u32 val = 0;
 	int ret;
 
+	if (pcie->max_lanes == 4)
+		mask = GENMASK(9, 8);
+
 	val = LANE_COUNT(lanes - 1);
-	ret = regmap_update_bits(syscon, offset, LANE_COUNT_MASK, val);
+	ret = regmap_update_bits(syscon, offset, mask, val);
 	if (ret)
 		dev_err(dev, "failed to set link count\n");
 
@@ -439,6 +443,8 @@  static int j721e_pcie_probe(struct platform_device *pdev)
 	ret = of_property_read_u32(node, "num-lanes", &num_lanes);
 	if (ret || num_lanes > data->max_lanes)
 		num_lanes = 1;
+
+	pcie->max_lanes = data->max_lanes;
 	pcie->num_lanes = num_lanes;
 
 	if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(48)))