diff mbox series

[v6,3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs

Message ID 20230331112941.823410-4-danishanwar@ti.com (mailing list archive)
State New, archived
Headers show
Series Introduce PRU platform consumer API | expand

Commit Message

MD Danish Anwar March 31, 2023, 11:29 a.m. UTC
From: Suman Anna <s-anna@ti.com>

Add two new generic API pruss_cfg_read() and pruss_cfg_update() to
the PRUSS platform driver to read and program respectively a register
within the PRUSS CFG sub-module represented by a syscon driver. These
APIs are internal to PRUSS driver.

Add two new helper functions pruss_cfg_get_gpmux() & pruss_cfg_set_gpmux()
to get and set the GP MUX mode for programming the PRUSS internal wrapper
mux functionality as needed by usecases.

Various useful registers and macros for certain register bit-fields and
their values have also been added.

Signed-off-by: Suman Anna <s-anna@ti.com>
Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Puranjay Mohan <p-mohan@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
 drivers/soc/ti/pruss.c           |  45 +++++++++++++
 drivers/soc/ti/pruss.h           | 112 +++++++++++++++++++++++++++++++
 include/linux/remoteproc/pruss.h |  32 +++++++++
 3 files changed, 189 insertions(+)
 create mode 100644 drivers/soc/ti/pruss.h

Comments

Simon Horman April 1, 2023, 2:07 p.m. UTC | #1
On Fri, Mar 31, 2023 at 04:59:40PM +0530, MD Danish Anwar wrote:
> From: Suman Anna <s-anna@ti.com>
> 
> Add two new generic API pruss_cfg_read() and pruss_cfg_update() to
> the PRUSS platform driver to read and program respectively a register
> within the PRUSS CFG sub-module represented by a syscon driver. These
> APIs are internal to PRUSS driver.
> 
> Add two new helper functions pruss_cfg_get_gpmux() & pruss_cfg_set_gpmux()
> to get and set the GP MUX mode for programming the PRUSS internal wrapper
> mux functionality as needed by usecases.
> 
> Various useful registers and macros for certain register bit-fields and
> their values have also been added.
> 
> Signed-off-by: Suman Anna <s-anna@ti.com>
> Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
> Signed-off-by: Puranjay Mohan <p-mohan@ti.com>
> Reviewed-by: Roger Quadros <rogerq@kernel.org>
> Reviewed-by: Tony Lindgren <tony@atomide.com>
> Signed-off-by: MD Danish Anwar <danishanwar@ti.com>

...

> diff --git a/drivers/soc/ti/pruss.h b/drivers/soc/ti/pruss.h
> new file mode 100644
> index 000000000000..4626d5f6b874
> --- /dev/null
> +++ b/drivers/soc/ti/pruss.h
> @@ -0,0 +1,112 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * PRU-ICSS Subsystem user interfaces
> + *
> + * Copyright (C) 2015-2023 Texas Instruments Incorporated - http://www.ti.com
> + *	MD Danish Anwar <danishanwar@ti.com>
> + */
> +
> +#ifndef _SOC_TI_PRUSS_H_
> +#define _SOC_TI_PRUSS_H_
> +
> +#include <linux/bits.h>
> +#include <linux/regmap.h>
> +
> +/*
> + * PRU_ICSS_CFG registers
> + * SYSCFG, ISRP, ISP, IESP, IECP, SCRP applicable on AMxxxx devices only
> + */
> +#define PRUSS_CFG_REVID         0x00
> +#define PRUSS_CFG_SYSCFG        0x04
> +#define PRUSS_CFG_GPCFG(x)      (0x08 + (x) * 4)
> +#define PRUSS_CFG_CGR           0x10
> +#define PRUSS_CFG_ISRP          0x14
> +#define PRUSS_CFG_ISP           0x18
> +#define PRUSS_CFG_IESP          0x1C
> +#define PRUSS_CFG_IECP          0x20
> +#define PRUSS_CFG_SCRP          0x24
> +#define PRUSS_CFG_PMAO          0x28
> +#define PRUSS_CFG_MII_RT        0x2C
> +#define PRUSS_CFG_IEPCLK        0x30
> +#define PRUSS_CFG_SPP           0x34
> +#define PRUSS_CFG_PIN_MX        0x40
> +
> +/* PRUSS_GPCFG register bits */
> +#define PRUSS_GPCFG_PRU_GPO_SH_SEL              BIT(25)
> +
> +#define PRUSS_GPCFG_PRU_DIV1_SHIFT              20
> +#define PRUSS_GPCFG_PRU_DIV1_MASK               GENMASK(24, 20)

There seems to be some redundancy in the encoding of '20' above.
I suspect this could be avoided by only defining ..._MASK
and using it with FIELD_SET() and FIELD_PREP().

> +
> +#define PRUSS_GPCFG_PRU_DIV0_SHIFT              15
> +#define PRUSS_GPCFG_PRU_DIV0_MASK               GENMASK(15, 19)

Perhaps this should be GENMASK(19, 15) ?

> +
> +#define PRUSS_GPCFG_PRU_GPO_MODE                BIT(14)
> +#define PRUSS_GPCFG_PRU_GPO_MODE_DIRECT         0
> +#define PRUSS_GPCFG_PRU_GPO_MODE_SERIAL         BIT(14)

Likewise, I suspect the awkwardness of using 0 to mean not BIT 14
could be avoided through use of FIELD_SET() and FIELD_PREP().
But maybe it doesn't help.

> +
> +#define PRUSS_GPCFG_PRU_GPI_SB                  BIT(13)
> +
> +#define PRUSS_GPCFG_PRU_GPI_DIV1_SHIFT          8
> +#define PRUSS_GPCFG_PRU_GPI_DIV1_MASK           GENMASK(12, 8)
> +
> +#define PRUSS_GPCFG_PRU_GPI_DIV0_SHIFT          3
> +#define PRUSS_GPCFG_PRU_GPI_DIV0_MASK           GENMASK(7, 3)
> +
> +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE_POSITIVE   0
> +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE_NEGATIVE   BIT(2)
> +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE            BIT(2)
> +
> +#define PRUSS_GPCFG_PRU_GPI_MODE_MASK           GENMASK(1, 0)
> +#define PRUSS_GPCFG_PRU_GPI_MODE_SHIFT          0
> +
> +#define PRUSS_GPCFG_PRU_MUX_SEL_SHIFT           26
> +#define PRUSS_GPCFG_PRU_MUX_SEL_MASK            GENMASK(29, 26)
> +
> +/* PRUSS_MII_RT register bits */
> +#define PRUSS_MII_RT_EVENT_EN                   BIT(0)
> +
> +/* PRUSS_SPP register bits */
> +#define PRUSS_SPP_XFER_SHIFT_EN                 BIT(1)
> +#define PRUSS_SPP_PRU1_PAD_HP_EN                BIT(0)
> +#define PRUSS_SPP_RTU_XFR_SHIFT_EN              BIT(3)

...
Anwar, Md Danish April 3, 2023, 8:31 a.m. UTC | #2
Hi Simon,

On 01/04/23 19:37, Simon Horman wrote:
> On Fri, Mar 31, 2023 at 04:59:40PM +0530, MD Danish Anwar wrote:
>> From: Suman Anna <s-anna@ti.com>
>>
>> Add two new generic API pruss_cfg_read() and pruss_cfg_update() to
>> the PRUSS platform driver to read and program respectively a register
>> within the PRUSS CFG sub-module represented by a syscon driver. These
>> APIs are internal to PRUSS driver.
>>
>> Add two new helper functions pruss_cfg_get_gpmux() & pruss_cfg_set_gpmux()
>> to get and set the GP MUX mode for programming the PRUSS internal wrapper
>> mux functionality as needed by usecases.
>>
>> Various useful registers and macros for certain register bit-fields and
>> their values have also been added.
>>
>> Signed-off-by: Suman Anna <s-anna@ti.com>
>> Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
>> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
>> Signed-off-by: Puranjay Mohan <p-mohan@ti.com>
>> Reviewed-by: Roger Quadros <rogerq@kernel.org>
>> Reviewed-by: Tony Lindgren <tony@atomide.com>
>> Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
> 
> ...
> 
>> diff --git a/drivers/soc/ti/pruss.h b/drivers/soc/ti/pruss.h
>> new file mode 100644
>> index 000000000000..4626d5f6b874
>> --- /dev/null
>> +++ b/drivers/soc/ti/pruss.h
>> @@ -0,0 +1,112 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * PRU-ICSS Subsystem user interfaces
>> + *
>> + * Copyright (C) 2015-2023 Texas Instruments Incorporated - http://www.ti.com
>> + *	MD Danish Anwar <danishanwar@ti.com>
>> + */
>> +
>> +#ifndef _SOC_TI_PRUSS_H_
>> +#define _SOC_TI_PRUSS_H_
>> +
>> +#include <linux/bits.h>
>> +#include <linux/regmap.h>
>> +
>> +/*
>> + * PRU_ICSS_CFG registers
>> + * SYSCFG, ISRP, ISP, IESP, IECP, SCRP applicable on AMxxxx devices only
>> + */
>> +#define PRUSS_CFG_REVID         0x00
>> +#define PRUSS_CFG_SYSCFG        0x04
>> +#define PRUSS_CFG_GPCFG(x)      (0x08 + (x) * 4)
>> +#define PRUSS_CFG_CGR           0x10
>> +#define PRUSS_CFG_ISRP          0x14
>> +#define PRUSS_CFG_ISP           0x18
>> +#define PRUSS_CFG_IESP          0x1C
>> +#define PRUSS_CFG_IECP          0x20
>> +#define PRUSS_CFG_SCRP          0x24
>> +#define PRUSS_CFG_PMAO          0x28
>> +#define PRUSS_CFG_MII_RT        0x2C
>> +#define PRUSS_CFG_IEPCLK        0x30
>> +#define PRUSS_CFG_SPP           0x34
>> +#define PRUSS_CFG_PIN_MX        0x40
>> +
>> +/* PRUSS_GPCFG register bits */
>> +#define PRUSS_GPCFG_PRU_GPO_SH_SEL              BIT(25)
>> +
>> +#define PRUSS_GPCFG_PRU_DIV1_SHIFT              20
>> +#define PRUSS_GPCFG_PRU_DIV1_MASK               GENMASK(24, 20)
> 
> There seems to be some redundancy in the encoding of '20' above.
> I suspect this could be avoided by only defining ..._MASK
> and using it with FIELD_SET() and FIELD_PREP().
> 
>> +
>> +#define PRUSS_GPCFG_PRU_DIV0_SHIFT              15
>> +#define PRUSS_GPCFG_PRU_DIV0_MASK               GENMASK(15, 19)
> 
> Perhaps this should be GENMASK(19, 15) ?
> 

yes this should have been GENMASK(15, 19). But this macro is not used anywhere
so I'll just drop it.

>> +
>> +#define PRUSS_GPCFG_PRU_GPO_MODE                BIT(14)
>> +#define PRUSS_GPCFG_PRU_GPO_MODE_DIRECT         0
>> +#define PRUSS_GPCFG_PRU_GPO_MODE_SERIAL         BIT(14)
> 
> Likewise, I suspect the awkwardness of using 0 to mean not BIT 14
> could be avoided through use of FIELD_SET() and FIELD_PREP().
> But maybe it doesn't help.
> 

This Macro is not used anywhere in code. I'll just drop them.

>> +
>> +#define PRUSS_GPCFG_PRU_GPI_SB                  BIT(13)
>> +
>> +#define PRUSS_GPCFG_PRU_GPI_DIV1_SHIFT          8
>> +#define PRUSS_GPCFG_PRU_GPI_DIV1_MASK           GENMASK(12, 8)
>> +
>> +#define PRUSS_GPCFG_PRU_GPI_DIV0_SHIFT          3
>> +#define PRUSS_GPCFG_PRU_GPI_DIV0_MASK           GENMASK(7, 3)
>> +
>> +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE_POSITIVE   0
>> +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE_NEGATIVE   BIT(2)
>> +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE            BIT(2)
>> +

All these above macros are not used anywhere in the driver code. Also in the
planned upcoming driver series, there are no APIs that will use these macros.

I'll be dropping all these redundant macros. The below macros are used in
driver so I'll keep them as it is.

>> +#define PRUSS_GPCFG_PRU_GPI_MODE_MASK           GENMASK(1, 0)
>> +#define PRUSS_GPCFG_PRU_GPI_MODE_SHIFT          0
>> +
>> +#define PRUSS_GPCFG_PRU_MUX_SEL_SHIFT           26
>> +#define PRUSS_GPCFG_PRU_MUX_SEL_MASK            GENMASK(29, 26)
>> +
>> +/* PRUSS_MII_RT register bits */
>> +#define PRUSS_MII_RT_EVENT_EN                   BIT(0)
>> +
>> +/* PRUSS_SPP register bits */
>> +#define PRUSS_SPP_XFER_SHIFT_EN                 BIT(1)
>> +#define PRUSS_SPP_PRU1_PAD_HP_EN                BIT(0)
>> +#define PRUSS_SPP_RTU_XFR_SHIFT_EN              BIT(3)
> 
> ...
Simon Horman April 3, 2023, 9:01 a.m. UTC | #3
On Mon, Apr 03, 2023 at 02:01:44PM +0530, Md Danish Anwar wrote:
> Hi Simon,
> 
> On 01/04/23 19:37, Simon Horman wrote:
> > On Fri, Mar 31, 2023 at 04:59:40PM +0530, MD Danish Anwar wrote:
> >> From: Suman Anna <s-anna@ti.com>

...

> All these above macros are not used anywhere in the driver code. Also in the
> planned upcoming driver series, there are no APIs that will use these macros.
> 
> I'll be dropping all these redundant macros. The below macros are used in
> driver so I'll keep them as it is.

Thanks Danish,

Dropping unused things seems like a good idea to me.
diff mbox series

Patch

diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
index 7aa0f7171af1..0e37fe142615 100644
--- a/drivers/soc/ti/pruss.c
+++ b/drivers/soc/ti/pruss.c
@@ -21,6 +21,7 @@ 
 #include <linux/regmap.h>
 #include <linux/remoteproc.h>
 #include <linux/slab.h>
+#include "pruss.h"
 
 /**
  * struct pruss_private_data - PRUSS driver private data
@@ -168,6 +169,50 @@  int pruss_release_mem_region(struct pruss *pruss,
 }
 EXPORT_SYMBOL_GPL(pruss_release_mem_region);
 
+/**
+ * pruss_cfg_get_gpmux() - get the current GPMUX value for a PRU device
+ * @pruss: pruss instance
+ * @pru_id: PRU identifier (0-1)
+ * @mux: pointer to store the current mux value into
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int pruss_cfg_get_gpmux(struct pruss *pruss, enum pruss_pru_id pru_id, u8 *mux)
+{
+	int ret = 0;
+	u32 val;
+
+	if (pru_id < 0 || pru_id >= PRUSS_NUM_PRUS || !mux)
+		return -EINVAL;
+
+	ret = pruss_cfg_read(pruss, PRUSS_CFG_GPCFG(pru_id), &val);
+	if (!ret)
+		*mux = (u8)((val & PRUSS_GPCFG_PRU_MUX_SEL_MASK) >>
+			    PRUSS_GPCFG_PRU_MUX_SEL_SHIFT);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pruss_cfg_get_gpmux);
+
+/**
+ * pruss_cfg_set_gpmux() - set the GPMUX value for a PRU device
+ * @pruss: pruss instance
+ * @pru_id: PRU identifier (0-1)
+ * @mux: new mux value for PRU
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int pruss_cfg_set_gpmux(struct pruss *pruss, enum pruss_pru_id pru_id, u8 mux)
+{
+	if (mux >= PRUSS_GP_MUX_SEL_MAX ||
+	    pru_id < 0 || pru_id >= PRUSS_NUM_PRUS)
+		return -EINVAL;
+
+	return pruss_cfg_update(pruss, PRUSS_CFG_GPCFG(pru_id),
+				PRUSS_GPCFG_PRU_MUX_SEL_MASK,
+				(u32)mux << PRUSS_GPCFG_PRU_MUX_SEL_SHIFT);
+}
+EXPORT_SYMBOL_GPL(pruss_cfg_set_gpmux);
+
 static void pruss_of_free_clk_provider(void *data)
 {
 	struct device_node *clk_mux_np = data;
diff --git a/drivers/soc/ti/pruss.h b/drivers/soc/ti/pruss.h
new file mode 100644
index 000000000000..4626d5f6b874
--- /dev/null
+++ b/drivers/soc/ti/pruss.h
@@ -0,0 +1,112 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * PRU-ICSS Subsystem user interfaces
+ *
+ * Copyright (C) 2015-2023 Texas Instruments Incorporated - http://www.ti.com
+ *	MD Danish Anwar <danishanwar@ti.com>
+ */
+
+#ifndef _SOC_TI_PRUSS_H_
+#define _SOC_TI_PRUSS_H_
+
+#include <linux/bits.h>
+#include <linux/regmap.h>
+
+/*
+ * PRU_ICSS_CFG registers
+ * SYSCFG, ISRP, ISP, IESP, IECP, SCRP applicable on AMxxxx devices only
+ */
+#define PRUSS_CFG_REVID         0x00
+#define PRUSS_CFG_SYSCFG        0x04
+#define PRUSS_CFG_GPCFG(x)      (0x08 + (x) * 4)
+#define PRUSS_CFG_CGR           0x10
+#define PRUSS_CFG_ISRP          0x14
+#define PRUSS_CFG_ISP           0x18
+#define PRUSS_CFG_IESP          0x1C
+#define PRUSS_CFG_IECP          0x20
+#define PRUSS_CFG_SCRP          0x24
+#define PRUSS_CFG_PMAO          0x28
+#define PRUSS_CFG_MII_RT        0x2C
+#define PRUSS_CFG_IEPCLK        0x30
+#define PRUSS_CFG_SPP           0x34
+#define PRUSS_CFG_PIN_MX        0x40
+
+/* PRUSS_GPCFG register bits */
+#define PRUSS_GPCFG_PRU_GPO_SH_SEL              BIT(25)
+
+#define PRUSS_GPCFG_PRU_DIV1_SHIFT              20
+#define PRUSS_GPCFG_PRU_DIV1_MASK               GENMASK(24, 20)
+
+#define PRUSS_GPCFG_PRU_DIV0_SHIFT              15
+#define PRUSS_GPCFG_PRU_DIV0_MASK               GENMASK(15, 19)
+
+#define PRUSS_GPCFG_PRU_GPO_MODE                BIT(14)
+#define PRUSS_GPCFG_PRU_GPO_MODE_DIRECT         0
+#define PRUSS_GPCFG_PRU_GPO_MODE_SERIAL         BIT(14)
+
+#define PRUSS_GPCFG_PRU_GPI_SB                  BIT(13)
+
+#define PRUSS_GPCFG_PRU_GPI_DIV1_SHIFT          8
+#define PRUSS_GPCFG_PRU_GPI_DIV1_MASK           GENMASK(12, 8)
+
+#define PRUSS_GPCFG_PRU_GPI_DIV0_SHIFT          3
+#define PRUSS_GPCFG_PRU_GPI_DIV0_MASK           GENMASK(7, 3)
+
+#define PRUSS_GPCFG_PRU_GPI_CLK_MODE_POSITIVE   0
+#define PRUSS_GPCFG_PRU_GPI_CLK_MODE_NEGATIVE   BIT(2)
+#define PRUSS_GPCFG_PRU_GPI_CLK_MODE            BIT(2)
+
+#define PRUSS_GPCFG_PRU_GPI_MODE_MASK           GENMASK(1, 0)
+#define PRUSS_GPCFG_PRU_GPI_MODE_SHIFT          0
+
+#define PRUSS_GPCFG_PRU_MUX_SEL_SHIFT           26
+#define PRUSS_GPCFG_PRU_MUX_SEL_MASK            GENMASK(29, 26)
+
+/* PRUSS_MII_RT register bits */
+#define PRUSS_MII_RT_EVENT_EN                   BIT(0)
+
+/* PRUSS_SPP register bits */
+#define PRUSS_SPP_XFER_SHIFT_EN                 BIT(1)
+#define PRUSS_SPP_PRU1_PAD_HP_EN                BIT(0)
+#define PRUSS_SPP_RTU_XFR_SHIFT_EN              BIT(3)
+
+/**
+ * pruss_cfg_read() - read a PRUSS CFG sub-module register
+ * @pruss: the pruss instance handle
+ * @reg: register offset within the CFG sub-module
+ * @val: pointer to return the value in
+ *
+ * Reads a given register within the PRUSS CFG sub-module and
+ * returns it through the passed-in @val pointer
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+static int pruss_cfg_read(struct pruss *pruss, unsigned int reg, unsigned int *val)
+{
+	if (IS_ERR_OR_NULL(pruss))
+		return -EINVAL;
+
+	return regmap_read(pruss->cfg_regmap, reg, val);
+}
+
+/**
+ * pruss_cfg_update() - configure a PRUSS CFG sub-module register
+ * @pruss: the pruss instance handle
+ * @reg: register offset within the CFG sub-module
+ * @mask: bit mask to use for programming the @val
+ * @val: value to write
+ *
+ * Programs a given register within the PRUSS CFG sub-module
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+static int pruss_cfg_update(struct pruss *pruss, unsigned int reg,
+			    unsigned int mask, unsigned int val)
+{
+	if (IS_ERR_OR_NULL(pruss))
+		return -EINVAL;
+
+	return regmap_update_bits(pruss->cfg_regmap, reg, mask, val);
+}
+
+#endif  /* _SOC_TI_PRUSS_H_ */
diff --git a/include/linux/remoteproc/pruss.h b/include/linux/remoteproc/pruss.h
index 33f930e0a0ce..5641153459a7 100644
--- a/include/linux/remoteproc/pruss.h
+++ b/include/linux/remoteproc/pruss.h
@@ -16,6 +16,24 @@ 
 
 #define PRU_RPROC_DRVNAME "pru-rproc"
 
+/*
+ * enum pruss_gp_mux_sel - PRUSS GPI/O Mux modes for the
+ * PRUSS_GPCFG0/1 registers
+ *
+ * NOTE: The below defines are the most common values, but there
+ * are some exceptions like on 66AK2G, where the RESERVED and MII2
+ * values are interchanged. Also, this bit-field does not exist on
+ * AM335x SoCs
+ */
+enum pruss_gp_mux_sel {
+	PRUSS_GP_MUX_SEL_GP = 0,
+	PRUSS_GP_MUX_SEL_ENDAT,
+	PRUSS_GP_MUX_SEL_RESERVED,
+	PRUSS_GP_MUX_SEL_SD,
+	PRUSS_GP_MUX_SEL_MII2,
+	PRUSS_GP_MUX_SEL_MAX,
+};
+
 /**
  * enum pruss_pru_id - PRU core identifiers
  * @PRUSS_PRU0: PRU Core 0.
@@ -78,6 +96,8 @@  int pruss_request_mem_region(struct pruss *pruss, enum pruss_mem mem_id,
 			     struct pruss_mem_region *region);
 int pruss_release_mem_region(struct pruss *pruss,
 			     struct pruss_mem_region *region);
+int pruss_cfg_get_gpmux(struct pruss *pruss, enum pruss_pru_id pru_id, u8 *mux);
+int pruss_cfg_set_gpmux(struct pruss *pruss, enum pruss_pru_id pru_id, u8 mux);
 
 #else
 
@@ -101,6 +121,18 @@  static inline int pruss_release_mem_region(struct pruss *pruss,
 	return -EOPNOTSUPP;
 }
 
+static inline int pruss_cfg_get_gpmux(struct pruss *pruss,
+				      enum pruss_pru_id pru_id, u8 *mux)
+{
+	return ERR_PTR(-EOPNOTSUPP);
+}
+
+static inline int pruss_cfg_set_gpmux(struct pruss *pruss,
+				      enum pruss_pru_id pru_id, u8 mux)
+{
+	return ERR_PTR(-EOPNOTSUPP);
+}
+
 #endif /* CONFIG_TI_PRUSS */
 
 #if IS_ENABLED(CONFIG_PRU_REMOTEPROC)