diff mbox series

[-next,v3] gpio: omap: Remove redundant dev_err_probe() and zero value handle code

Message ID 20230727124043.2751747-1-ruanjinjie@huawei.com (mailing list archive)
State New, archived
Headers show
Series [-next,v3] gpio: omap: Remove redundant dev_err_probe() and zero value handle code | expand

Commit Message

Jinjie Ruan July 27, 2023, 12:40 p.m. UTC
There is no need to call the dev_err_probe() function directly to print
a custom message when handling an error from platform_get_irq() function as
it is going to display an appropriate error message in case of a failure.

And the code to handle bank->irq = 0 is redundant because
platform_get_irq() do not return 0.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
---
v3:
- remove the redundant zero value handle code
---
v2:
- split into 2 patches on per-driver basis
---
 drivers/gpio/gpio-omap.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

Comments

Bartosz Golaszewski July 29, 2023, 1:51 p.m. UTC | #1
On Thu, Jul 27, 2023 at 2:41 PM Ruan Jinjie <ruanjinjie@huawei.com> wrote:
>
> There is no need to call the dev_err_probe() function directly to print
> a custom message when handling an error from platform_get_irq() function as
> it is going to display an appropriate error message in case of a failure.
>
> And the code to handle bank->irq = 0 is redundant because
> platform_get_irq() do not return 0.
>
> Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
> Reviewed-by: Andy Shevchenko <andy@kernel.org>
> ---

Applied, thanks!

Bart
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 2b78fde74e30..a927680c66f8 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1412,11 +1412,8 @@  static int omap_gpio_probe(struct platform_device *pdev)
 	bank->dev = dev;
 
 	bank->irq = platform_get_irq(pdev, 0);
-	if (bank->irq <= 0) {
-		if (!bank->irq)
-			bank->irq = -ENXIO;
-		return dev_err_probe(dev, bank->irq, "can't get irq resource\n");
-	}
+	if (bank->irq < 0)
+		return bank->irq;
 
 	bank->chip.parent = dev;
 	bank->chip.owner = THIS_MODULE;