| Message ID | 20230809092722.11000-3-tony@atomide.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,1/3] bus: ti-sysc: Fix build warning for 64-bit build | expand |
On 12:27-20230809, Tony Lindgren wrote: > Enable the uart quirks similar to the earlier SoCs. Let's assume we are > likely going to need a k3 specific quirk mask separate from the earlier > SoCs, so let's not start changing the revision register mask at this point. > > Note that SYSC_QUIRK_LEGACY_IDLE will be needed until we can remove the > need for pm_runtime_irq_safe() from 8250_omap driver. > > Signed-off-by: Tony Lindgren <tony@atomide.com> > --- > drivers/bus/ti-sysc.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c > --- a/drivers/bus/ti-sysc.c > +++ b/drivers/bus/ti-sysc.c > @@ -1525,6 +1525,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { > SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), > SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff, > SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), > + SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47424e03, 0xffffffff, > + SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), > > /* Quirks that need to be set based on the module address */ > SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -ENODEV, 0x50000800, 0xffffffff, > -- > 2.41.0 Reviewed-by: Nishanth Menon <nm@ti.com>
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -1525,6 +1525,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff, SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47424e03, 0xffffffff, + SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), /* Quirks that need to be set based on the module address */ SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -ENODEV, 0x50000800, 0xffffffff,
Enable the uart quirks similar to the earlier SoCs. Let's assume we are likely going to need a k3 specific quirk mask separate from the earlier SoCs, so let's not start changing the revision register mask at this point. Note that SYSC_QUIRK_LEGACY_IDLE will be needed until we can remove the need for pm_runtime_irq_safe() from 8250_omap driver. Signed-off-by: Tony Lindgren <tony@atomide.com> --- drivers/bus/ti-sysc.c | 2 ++ 1 file changed, 2 insertions(+)