diff mbox series

[-next,09/11] gpio: stp-xway: Use helper function devm_clk_get_enabled()

Message ID 20230818093018.1051434-10-lizetao1@huawei.com (mailing list archive)
State New, archived
Headers show
Series gpio: Use devm_clk_get_*() helper function to simplify the drivers. | expand

Commit Message

Li Zetao Aug. 18, 2023, 9:30 a.m. UTC
Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for
prepared and enabled clocks"), devm_clk_get() and clk_prepare_enable()
can now be replaced by devm_clk_get_enabled() when the driver enables
(and possibly prepares) the clocks for the whole lifetime of the device.
Moreover, it is no longer necessary to unprepare and disable the clocks
explicitly.

Signed-off-by: Li Zetao <lizetao1@huawei.com>
---
 drivers/gpio/gpio-stp-xway.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

Comments

Andy Shevchenko Aug. 18, 2023, 3:11 p.m. UTC | #1
On Fri, Aug 18, 2023 at 05:30:16PM +0800, Li Zetao wrote:
> Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for
> prepared and enabled clocks"), devm_clk_get() and clk_prepare_enable()
> can now be replaced by devm_clk_get_enabled() when the driver enables
> (and possibly prepares) the clocks for the whole lifetime of the device.
> Moreover, it is no longer necessary to unprepare and disable the clocks
> explicitly.

...

>  	ret = devm_gpiochip_add_data(&pdev->dev, &chip->gc, chip);
> -	if (ret) {
> -		clk_disable_unprepare(clk);
> +	if (ret)
>  		return ret;
> -	}
>  
>  	dev_info(&pdev->dev, "Init done\n");

Go further and simply

	return devm_gpiochip_add_data(...);
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-stp-xway.c b/drivers/gpio/gpio-stp-xway.c
index 053d616f2e02..5a6406d1f03a 100644
--- a/drivers/gpio/gpio-stp-xway.c
+++ b/drivers/gpio/gpio-stp-xway.c
@@ -296,23 +296,17 @@  static int xway_stp_probe(struct platform_device *pdev)
 	if (!of_property_read_bool(pdev->dev.of_node, "lantiq,rising"))
 		chip->edge = XWAY_STP_FALLING;
 
-	clk = devm_clk_get(&pdev->dev, NULL);
+	clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(clk)) {
 		dev_err(&pdev->dev, "Failed to get clock\n");
 		return PTR_ERR(clk);
 	}
 
-	ret = clk_prepare_enable(clk);
-	if (ret)
-		return ret;
-
 	xway_stp_hw_init(chip);
 
 	ret = devm_gpiochip_add_data(&pdev->dev, &chip->gc, chip);
-	if (ret) {
-		clk_disable_unprepare(clk);
+	if (ret)
 		return ret;
-	}
 
 	dev_info(&pdev->dev, "Init done\n");