diff mbox series

[v4,2/4] arm64: dts: ti: k3-am654-base-board: add ICSSG2 Ethernet support

Message ID 20231003105539.1698436-3-danishanwar@ti.com (mailing list archive)
State New, archived
Headers show
Series Add AM65x ICSSG Ethernet support | expand

Commit Message

MD Danish Anwar Oct. 3, 2023, 10:55 a.m. UTC
ICSSG2 provides dual Gigabit Ethernet support.

For support SR2.0 ICSSG Ethernet firmware:
- provide different firmware blobs and use TX_PRU.
- IEP0 is used as PTP Hardware Clock and can only be used for one port.
- TX timestamp notification comes via INTC interrupt.

Reviewed-by: Andrew Davis <afd@ti.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
 arch/arm64/boot/dts/ti/Makefile               |   2 +
 ...se-board.dts => k3-am654-common-board.dts} |   0
 arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso   | 145 ++++++++++++++++++
 3 files changed, 147 insertions(+)
 rename arch/arm64/boot/dts/ti/{k3-am654-base-board.dts => k3-am654-common-board.dts} (100%)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso

Comments

Vignesh Raghavendra Oct. 12, 2023, 9:21 a.m. UTC | #1
On 03/10/23 16:25, MD Danish Anwar wrote:
> ICSSG2 provides dual Gigabit Ethernet support.
> 
> For support SR2.0 ICSSG Ethernet firmware:

Are you describing difference wrt SR1.0? Because there is no SR1.0 in
mainline today. So this doesnt make sense

> - provide different firmware blobs and use TX_PRU.
> - IEP0 is used as PTP Hardware Clock and can only be used for one port.
> - TX timestamp notification comes via INTC interrupt.
> 


You are also renaming existing dts file which needs to be called out
clearly in the commit message something like:


Rename the existing k3-am654-base-board.dts to k3-am654-common-board.dts
This represents basic board where ICSSG/PRUs can be used for general
purpose. k3-am654-base-board.dtb is now made of common-board + ICSSG2
specific overlay which enables ICSSG2 dual Ethernet ports available on
base board.



> Reviewed-by: Andrew Davis <afd@ti.com>
> Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
> ---
>  arch/arm64/boot/dts/ti/Makefile               |   2 +
>  ...se-board.dts => k3-am654-common-board.dts} |   0
>  arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso   | 145 ++++++++++++++++++
>  3 files changed, 147 insertions(+)
>  rename arch/arm64/boot/dts/ti/{k3-am654-base-board.dts => k3-am654-common-board.dts} (100%)
>  create mode 100644 arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
> 
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index e7b8e2e7f083..8f5c9515777e 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -42,12 +42,14 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb
>  dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-wlan.dtb
>  
>  # Boards with AM65x SoC
> +k3-am654-base-board-dtbs := k3-am654-common-board.dtb k3-am654-icssg2.dtbo
>  k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo
>  dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb
>  dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
>  dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
>  dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb
>  dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
> +dtb-$(CONFIG_ARCH_K3) += k3-am654-common-board.dtb
>  dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
>  dtb-$(CONFIG_ARCH_K3) += k3-am654-gp-evm.dtb
>  
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-common-board.dts
> similarity index 100%
> rename from arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> rename to arch/arm64/boot/dts/ti/k3-am654-common-board.dts
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso b/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
> new file mode 100644
> index 000000000000..7b7d32282668
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
> @@ -0,0 +1,145 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/**
> + * DT overlay for IDK application board on AM654 EVM
> + *
> + * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/net/ti-dp83867.h>
> +#include "k3-pinctrl.h"
> +
> +&{/} {
> +	aliases {
> +		ethernet1 = &icssg2_emac0;
> +		ethernet2 = &icssg2_emac1;
> +	};
> +
> +	/* Ethernet node on PRU-ICSSG2 */
> +	icssg2_eth: icssg2-eth {
> +		compatible = "ti,am654-icssg-prueth";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&icssg2_rgmii_pins_default>;
> +		sram = <&msmc_ram>;
> +		ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>,
> +			<&pru2_1>, <&rtu2_1>, <&tx_pru2_1>;
> +		firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
> +				"ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
> +				"ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
> +				"ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
> +				"ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
> +				"ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
> +
> +		ti,pruss-gp-mux-sel = <2>,      /* MII mode */
> +				      <2>,
> +				      <2>,
> +				      <2>,	/* MII mode */
> +				      <2>,
> +				      <2>;
> +
> +		ti,mii-g-rt = <&icssg2_mii_g_rt>;
> +		ti,mii-rt = <&icssg2_mii_rt>;
> +		ti,iep = <&icssg2_iep0>, <&icssg2_iep1>;
> +
> +		interrupt-parent = <&icssg2_intc>;
> +		interrupts = <24 0 2>, <25 1 3>;
> +		interrupt-names = "tx_ts0", "tx_ts1";
> +
> +		dmas = <&main_udmap 0xc300>, /* egress slice 0 */
> +		       <&main_udmap 0xc301>, /* egress slice 0 */
> +		       <&main_udmap 0xc302>, /* egress slice 0 */
> +		       <&main_udmap 0xc303>, /* egress slice 0 */
> +		       <&main_udmap 0xc304>, /* egress slice 1 */
> +		       <&main_udmap 0xc305>, /* egress slice 1 */
> +		       <&main_udmap 0xc306>, /* egress slice 1 */
> +		       <&main_udmap 0xc307>, /* egress slice 1 */
> +		       <&main_udmap 0x4300>, /* ingress slice 0 */
> +		       <&main_udmap 0x4301>; /* ingress slice 1 */
> +
> +		dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
> +			    "tx1-0", "tx1-1", "tx1-2", "tx1-3",
> +			    "rx0", "rx1";
> +		ethernet-ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			icssg2_emac0: port@0 {
> +				reg = <0>;
> +				phy-handle = <&icssg2_phy0>;
> +				phy-mode = "rgmii-id";
> +				ti,syscon-rgmii-delay = <&scm_conf 0x4120>;
> +				/* Filled in by bootloader */
> +				local-mac-address = [00 00 00 00 00 00];
> +			};
> +			icssg2_emac1: port@1 {
> +				reg = <1>;
> +				phy-handle = <&icssg2_phy1>;
> +				phy-mode = "rgmii-id";
> +				ti,syscon-rgmii-delay = <&scm_conf 0x4124>;
> +				/* Filled in by bootloader */
> +				local-mac-address = [00 00 00 00 00 00];
> +			};
> +		};
> +	};
> +};
> +
> +&main_pmx0 {
> +
> +	icssg2_mdio_pins_default: icssg2-mdio-default-pins {
> +		pinctrl-single,pins = <
> +			AM65X_IOPAD(0x0094, PIN_INPUT, 2) /* (AC19) PRG2_PRU0_GPO7.PRG2_MDIO0_MDIO */
> +			AM65X_IOPAD(0x00c8, PIN_OUTPUT, 2) /* (AE15) PRG2_PRU1_GPO7.PRG2_MDIO0_MDC */
> +		>;
> +	};
> +
> +	icssg2_rgmii_pins_default: icssg2-rgmii-default-pins {
> +		pinctrl-single,pins = <
> +			AM65X_IOPAD(0x00ac, PIN_INPUT, 2) /* (AH15) PRG2_PRU1_GPO0.PRG2_RGMII2_RD0 */
> +			AM65X_IOPAD(0x00b0, PIN_INPUT, 2) /* (AC16) PRG2_PRU1_GPO1.PRG2_RGMII2_RD1 */
> +			AM65X_IOPAD(0x00b4, PIN_INPUT, 2) /* (AD17) PRG2_PRU1_GPO2.PRG2_RGMII2_RD2 */
> +			AM65X_IOPAD(0x00b8, PIN_INPUT, 2) /* (AH14) PRG2_PRU1_GPO3.PRG2_RGMII2_RD3 */
> +			AM65X_IOPAD(0x00cc, PIN_OUTPUT, 2) /* (AD15) PRG2_PRU1_GPO8.PRG2_RGMII2_TD0 */
> +			AM65X_IOPAD(0x00d0, PIN_OUTPUT, 2) /* (AF14) PRG2_PRU1_GPO9.PRG2_RGMII2_TD1 */
> +			AM65X_IOPAD(0x00d4, PIN_OUTPUT, 2) /* (AC15) PRG2_PRU1_GPO10.PRG2_RGMII2_TD2 */
> +			AM65X_IOPAD(0x00d8, PIN_OUTPUT, 2) /* (AD14) PRG2_PRU1_GPO11.PRG2_RGMII2_TD3 */
> +			AM65X_IOPAD(0x00dc, PIN_INPUT, 2) /* (AE14) PRG2_PRU1_GPO16.PRG2_RGMII2_TXC */
> +			AM65X_IOPAD(0x00c4, PIN_OUTPUT, 2) /* (AC17) PRG2_PRU1_GPO6.PRG2_RGMII2_TX_CTL */
> +			AM65X_IOPAD(0x00c0, PIN_INPUT, 2) /* (AG15) PRG2_PRU1_GPO5.PRG2_RGMII2_RXC */
> +			AM65X_IOPAD(0x00bc, PIN_INPUT, 2) /* (AG14) PRG2_PRU1_GPO4.PRG2_RGMII2_RX_CTL */
> +
> +			AM65X_IOPAD(0x0078, PIN_INPUT, 2) /* (AF18) PRG2_PRU0_GPO0.PRG2_RGMII1_RD0 */
> +			AM65X_IOPAD(0x007c, PIN_INPUT, 2) /* (AE18) PRG2_PRU0_GPO1.PRG2_RGMII1_RD1 */
> +			AM65X_IOPAD(0x0080, PIN_INPUT, 2) /* (AH17) PRG2_PRU0_GPO2.PRG2_RGMII1_RD2 */
> +			AM65X_IOPAD(0x0084, PIN_INPUT, 2) /* (AG18) PRG2_PRU0_GPO3.PRG2_RGMII1_RD3 */
> +			AM65X_IOPAD(0x0098, PIN_OUTPUT, 2) /* (AH16) PRG2_PRU0_GPO8.PRG2_RGMII1_TD0 */
> +			AM65X_IOPAD(0x009c, PIN_OUTPUT, 2) /* (AG16) PRG2_PRU0_GPO9.PRG2_RGMII1_TD1 */
> +			AM65X_IOPAD(0x00a0, PIN_OUTPUT, 2) /* (AF16) PRG2_PRU0_GPO10.PRG2_RGMII1_TD2 */
> +			AM65X_IOPAD(0x00a4, PIN_OUTPUT, 2) /* (AE16) PRG2_PRU0_GPO11.PRG2_RGMII1_TD3 */
> +			AM65X_IOPAD(0x00a8, PIN_INPUT, 2) /* (AD16) PRG2_PRU0_GPO16.PRG2_RGMII1_TXC */
> +			AM65X_IOPAD(0x0090, PIN_OUTPUT, 2) /* (AE17) PRG2_PRU0_GPO6.PRG2_RGMII1_TX_CTL */
> +			AM65X_IOPAD(0x008c, PIN_INPUT, 2) /* (AF17) PRG2_PRU0_GPO5.PRG2_RGMII1_RXC */
> +			AM65X_IOPAD(0x0088, PIN_INPUT, 2) /* (AG17) PRG2_PRU0_GPO4.PRG2_RGMII1_RX_CTL */
> +		>;
> +	};
> +};
> +
> +&icssg2_mdio {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&icssg2_mdio_pins_default>;
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	icssg2_phy0: ethernet-phy@0 {
> +		reg = <0>;
> +		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> +		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> +	};
> +
> +	icssg2_phy1: ethernet-phy@3 {
> +		reg = <3>;
> +		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> +		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> +	};
> +};
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index e7b8e2e7f083..8f5c9515777e 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -42,12 +42,14 @@  dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-wlan.dtb
 
 # Boards with AM65x SoC
+k3-am654-base-board-dtbs := k3-am654-common-board.dtb k3-am654-icssg2.dtbo
 k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am654-common-board.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am654-gp-evm.dtb
 
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-common-board.dts
similarity index 100%
rename from arch/arm64/boot/dts/ti/k3-am654-base-board.dts
rename to arch/arm64/boot/dts/ti/k3-am654-common-board.dts
diff --git a/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso b/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
new file mode 100644
index 000000000000..7b7d32282668
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
@@ -0,0 +1,145 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT overlay for IDK application board on AM654 EVM
+ *
+ * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+	aliases {
+		ethernet1 = &icssg2_emac0;
+		ethernet2 = &icssg2_emac1;
+	};
+
+	/* Ethernet node on PRU-ICSSG2 */
+	icssg2_eth: icssg2-eth {
+		compatible = "ti,am654-icssg-prueth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&icssg2_rgmii_pins_default>;
+		sram = <&msmc_ram>;
+		ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>,
+			<&pru2_1>, <&rtu2_1>, <&tx_pru2_1>;
+		firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+		ti,pruss-gp-mux-sel = <2>,      /* MII mode */
+				      <2>,
+				      <2>,
+				      <2>,	/* MII mode */
+				      <2>,
+				      <2>;
+
+		ti,mii-g-rt = <&icssg2_mii_g_rt>;
+		ti,mii-rt = <&icssg2_mii_rt>;
+		ti,iep = <&icssg2_iep0>, <&icssg2_iep1>;
+
+		interrupt-parent = <&icssg2_intc>;
+		interrupts = <24 0 2>, <25 1 3>;
+		interrupt-names = "tx_ts0", "tx_ts1";
+
+		dmas = <&main_udmap 0xc300>, /* egress slice 0 */
+		       <&main_udmap 0xc301>, /* egress slice 0 */
+		       <&main_udmap 0xc302>, /* egress slice 0 */
+		       <&main_udmap 0xc303>, /* egress slice 0 */
+		       <&main_udmap 0xc304>, /* egress slice 1 */
+		       <&main_udmap 0xc305>, /* egress slice 1 */
+		       <&main_udmap 0xc306>, /* egress slice 1 */
+		       <&main_udmap 0xc307>, /* egress slice 1 */
+		       <&main_udmap 0x4300>, /* ingress slice 0 */
+		       <&main_udmap 0x4301>; /* ingress slice 1 */
+
+		dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+			    "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+			    "rx0", "rx1";
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			icssg2_emac0: port@0 {
+				reg = <0>;
+				phy-handle = <&icssg2_phy0>;
+				phy-mode = "rgmii-id";
+				ti,syscon-rgmii-delay = <&scm_conf 0x4120>;
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+			icssg2_emac1: port@1 {
+				reg = <1>;
+				phy-handle = <&icssg2_phy1>;
+				phy-mode = "rgmii-id";
+				ti,syscon-rgmii-delay = <&scm_conf 0x4124>;
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+
+	icssg2_mdio_pins_default: icssg2-mdio-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0094, PIN_INPUT, 2) /* (AC19) PRG2_PRU0_GPO7.PRG2_MDIO0_MDIO */
+			AM65X_IOPAD(0x00c8, PIN_OUTPUT, 2) /* (AE15) PRG2_PRU1_GPO7.PRG2_MDIO0_MDC */
+		>;
+	};
+
+	icssg2_rgmii_pins_default: icssg2-rgmii-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x00ac, PIN_INPUT, 2) /* (AH15) PRG2_PRU1_GPO0.PRG2_RGMII2_RD0 */
+			AM65X_IOPAD(0x00b0, PIN_INPUT, 2) /* (AC16) PRG2_PRU1_GPO1.PRG2_RGMII2_RD1 */
+			AM65X_IOPAD(0x00b4, PIN_INPUT, 2) /* (AD17) PRG2_PRU1_GPO2.PRG2_RGMII2_RD2 */
+			AM65X_IOPAD(0x00b8, PIN_INPUT, 2) /* (AH14) PRG2_PRU1_GPO3.PRG2_RGMII2_RD3 */
+			AM65X_IOPAD(0x00cc, PIN_OUTPUT, 2) /* (AD15) PRG2_PRU1_GPO8.PRG2_RGMII2_TD0 */
+			AM65X_IOPAD(0x00d0, PIN_OUTPUT, 2) /* (AF14) PRG2_PRU1_GPO9.PRG2_RGMII2_TD1 */
+			AM65X_IOPAD(0x00d4, PIN_OUTPUT, 2) /* (AC15) PRG2_PRU1_GPO10.PRG2_RGMII2_TD2 */
+			AM65X_IOPAD(0x00d8, PIN_OUTPUT, 2) /* (AD14) PRG2_PRU1_GPO11.PRG2_RGMII2_TD3 */
+			AM65X_IOPAD(0x00dc, PIN_INPUT, 2) /* (AE14) PRG2_PRU1_GPO16.PRG2_RGMII2_TXC */
+			AM65X_IOPAD(0x00c4, PIN_OUTPUT, 2) /* (AC17) PRG2_PRU1_GPO6.PRG2_RGMII2_TX_CTL */
+			AM65X_IOPAD(0x00c0, PIN_INPUT, 2) /* (AG15) PRG2_PRU1_GPO5.PRG2_RGMII2_RXC */
+			AM65X_IOPAD(0x00bc, PIN_INPUT, 2) /* (AG14) PRG2_PRU1_GPO4.PRG2_RGMII2_RX_CTL */
+
+			AM65X_IOPAD(0x0078, PIN_INPUT, 2) /* (AF18) PRG2_PRU0_GPO0.PRG2_RGMII1_RD0 */
+			AM65X_IOPAD(0x007c, PIN_INPUT, 2) /* (AE18) PRG2_PRU0_GPO1.PRG2_RGMII1_RD1 */
+			AM65X_IOPAD(0x0080, PIN_INPUT, 2) /* (AH17) PRG2_PRU0_GPO2.PRG2_RGMII1_RD2 */
+			AM65X_IOPAD(0x0084, PIN_INPUT, 2) /* (AG18) PRG2_PRU0_GPO3.PRG2_RGMII1_RD3 */
+			AM65X_IOPAD(0x0098, PIN_OUTPUT, 2) /* (AH16) PRG2_PRU0_GPO8.PRG2_RGMII1_TD0 */
+			AM65X_IOPAD(0x009c, PIN_OUTPUT, 2) /* (AG16) PRG2_PRU0_GPO9.PRG2_RGMII1_TD1 */
+			AM65X_IOPAD(0x00a0, PIN_OUTPUT, 2) /* (AF16) PRG2_PRU0_GPO10.PRG2_RGMII1_TD2 */
+			AM65X_IOPAD(0x00a4, PIN_OUTPUT, 2) /* (AE16) PRG2_PRU0_GPO11.PRG2_RGMII1_TD3 */
+			AM65X_IOPAD(0x00a8, PIN_INPUT, 2) /* (AD16) PRG2_PRU0_GPO16.PRG2_RGMII1_TXC */
+			AM65X_IOPAD(0x0090, PIN_OUTPUT, 2) /* (AE17) PRG2_PRU0_GPO6.PRG2_RGMII1_TX_CTL */
+			AM65X_IOPAD(0x008c, PIN_INPUT, 2) /* (AF17) PRG2_PRU0_GPO5.PRG2_RGMII1_RXC */
+			AM65X_IOPAD(0x0088, PIN_INPUT, 2) /* (AG17) PRG2_PRU0_GPO4.PRG2_RGMII1_RX_CTL */
+		>;
+	};
+};
+
+&icssg2_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&icssg2_mdio_pins_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	icssg2_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+
+	icssg2_phy1: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};