diff mbox series

ARM: OMAP2+: prm33xx.c: Fix kerneldoc warnings

Message ID 20240308073501.3699-1-tony@atomide.com (mailing list archive)
State New
Headers show
Series ARM: OMAP2+: prm33xx.c: Fix kerneldoc warnings | expand

Commit Message

Tony Lindgren March 8, 2024, 7:35 a.m. UTC
Commit 6521f6a195c7 ("ARM: AM33xx: PRM: Implement REBOOT_COLD")
added a new kerneldoc warning as the function name changed:

warning: expecting prototype for am33xx_prm_global_warm_sw_reset().
Prototype was for am33xx_prm_global_sw_reset() instead

Turns out prm33xx.c produces a few other kerneldoc warnings so let's
fix them all.

Fixes: 6521f6a195c7 ("ARM: AM33xx: PRM: Implement REBOOT_COLD")
Cc: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Cc: Matthias Michel <matthias.michel@siemens.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/prm33xx.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

Comments

Sverdlin, Alexander March 8, 2024, 8:12 a.m. UTC | #1
Hi Tony!

On Fri, 2024-03-08 at 09:35 +0200, Tony Lindgren wrote:
> Commit 6521f6a195c7 ("ARM: AM33xx: PRM: Implement REBOOT_COLD")
> added a new kerneldoc warning as the function name changed:
> 
> warning: expecting prototype for am33xx_prm_global_warm_sw_reset().
> Prototype was for am33xx_prm_global_sw_reset() instead
> 
> Turns out prm33xx.c produces a few other kerneldoc warnings so let's
> fix them all.
> 
> Fixes: 6521f6a195c7 ("ARM: AM33xx: PRM: Implement REBOOT_COLD")
> Cc: Alexander Sverdlin <alexander.sverdlin@siemens.com>
> Cc: Matthias Michel <matthias.michel@siemens.com>
> Cc: Randy Dunlap <rdunlap@infradead.org>
> Signed-off-by: Tony Lindgren <tony@atomide.com>

My bad! Thanks for fixing this!
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>

> ---
>  arch/arm/mach-omap2/prm33xx.c | 22 +++++++++++-----------
>  1 file changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
> --- a/arch/arm/mach-omap2/prm33xx.c
> +++ b/arch/arm/mach-omap2/prm33xx.c
> @@ -48,8 +48,7 @@ static u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
>   * @part: PRM partition, ignored for AM33xx
>   * @inst: CM instance register offset (*_INST macro)
>   * @rstctrl_offs: RM_RSTCTRL register address offset for this module
> - *
> - * Returns 1 if the (sub)module hardreset line is currently asserted,
> + * @return: 1 if the (sub)module hardreset line is currently asserted,
>   * 0 if the (sub)module hardreset line is not currently asserted, or
>   * -EINVAL upon parameter error.
>   */
> @@ -70,14 +69,14 @@ static int am33xx_prm_is_hardreset_asserted(u8 shift, u8 part, s16 inst,
>   * @shift: register bit shift corresponding to the reset line to assert
>   * @part: CM partition, ignored for AM33xx
>   * @inst: CM instance register offset (*_INST macro)
> - * @rstctrl_reg: RM_RSTCTRL register address for this module
> + * @rstctrl_offs: RM_RSTCTRL register address offset for this module
> + * @return: Returns 0 upon success or -EINVAL upon an argument error
>   *
>   * Some IPs like dsp, ipu or iva contain processors that require an HW
>   * reset line to be asserted / deasserted in order to fully enable the
>   * IP.  These modules may have multiple hard-reset lines that reset
>   * different 'submodules' inside the IP block.  This function will
> - * place the submodule into reset.  Returns 0 upon success or -EINVAL
> - * upon an argument error.
> + * place the submodule into reset.
>   */
>  static int am33xx_prm_assert_hardreset(u8 shift, u8 part, s16 inst,
>                                        u16 rstctrl_offs)
> @@ -96,17 +95,18 @@ static int am33xx_prm_assert_hardreset(u8 shift, u8 part, s16 inst,
>   * @st_shift: reset status register bit shift corresponding to the reset line
>   * @part: PRM partition, not used for AM33xx
>   * @inst: CM instance register offset (*_INST macro)
> - * @rstctrl_reg: RM_RSTCTRL register address for this module
> - * @rstst_reg: RM_RSTST register address for this module
> + * @rstctrl_offs: RM_RSTCTRL register address offset for this module
> + * @rstst_offs: RM_RSTST register address offset for this module
> + * @return: Returns 0 upon success or -EINVAL upon an argument error,
> + * -EEXIST if the submodule was already out of reset, or -EBUSY if the
> + * submodule did not exit reset promptly
>   *
>   * Some IPs like dsp, ipu or iva contain processors that require an HW
>   * reset line to be asserted / deasserted in order to fully enable the
>   * IP.  These modules may have multiple hard-reset lines that reset
>   * different 'submodules' inside the IP block.  This function will
>   * take the submodule out of reset and wait until the PRCM indicates
> - * that the reset has completed before returning.  Returns 0 upon success or
> - * -EINVAL upon an argument error, -EEXIST if the submodule was already out
> - * of reset, or -EBUSY if the submodule did not exit reset promptly.
> + * that the reset has completed before returning.
>   */
>  static int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part,
>                                          s16 inst, u16 rstctrl_offs,
> @@ -315,7 +315,7 @@ static int am33xx_check_vcvp(void)
>  }
>  
>  /**
> - * am33xx_prm_global_warm_sw_reset - reboot the device via warm reset
> + * am33xx_prm_global_sw_reset - reboot the device via warm reset
>   *
>   * Immediately reboots the device through warm reset.
>   */
diff mbox series

Patch

diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -48,8 +48,7 @@  static u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
  * @part: PRM partition, ignored for AM33xx
  * @inst: CM instance register offset (*_INST macro)
  * @rstctrl_offs: RM_RSTCTRL register address offset for this module
- *
- * Returns 1 if the (sub)module hardreset line is currently asserted,
+ * @return: 1 if the (sub)module hardreset line is currently asserted,
  * 0 if the (sub)module hardreset line is not currently asserted, or
  * -EINVAL upon parameter error.
  */
@@ -70,14 +69,14 @@  static int am33xx_prm_is_hardreset_asserted(u8 shift, u8 part, s16 inst,
  * @shift: register bit shift corresponding to the reset line to assert
  * @part: CM partition, ignored for AM33xx
  * @inst: CM instance register offset (*_INST macro)
- * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @rstctrl_offs: RM_RSTCTRL register address offset for this module
+ * @return: Returns 0 upon success or -EINVAL upon an argument error
  *
  * Some IPs like dsp, ipu or iva contain processors that require an HW
  * reset line to be asserted / deasserted in order to fully enable the
  * IP.  These modules may have multiple hard-reset lines that reset
  * different 'submodules' inside the IP block.  This function will
- * place the submodule into reset.  Returns 0 upon success or -EINVAL
- * upon an argument error.
+ * place the submodule into reset.
  */
 static int am33xx_prm_assert_hardreset(u8 shift, u8 part, s16 inst,
 				       u16 rstctrl_offs)
@@ -96,17 +95,18 @@  static int am33xx_prm_assert_hardreset(u8 shift, u8 part, s16 inst,
  * @st_shift: reset status register bit shift corresponding to the reset line
  * @part: PRM partition, not used for AM33xx
  * @inst: CM instance register offset (*_INST macro)
- * @rstctrl_reg: RM_RSTCTRL register address for this module
- * @rstst_reg: RM_RSTST register address for this module
+ * @rstctrl_offs: RM_RSTCTRL register address offset for this module
+ * @rstst_offs: RM_RSTST register address offset for this module
+ * @return: Returns 0 upon success or -EINVAL upon an argument error,
+ * -EEXIST if the submodule was already out of reset, or -EBUSY if the
+ * submodule did not exit reset promptly
  *
  * Some IPs like dsp, ipu or iva contain processors that require an HW
  * reset line to be asserted / deasserted in order to fully enable the
  * IP.  These modules may have multiple hard-reset lines that reset
  * different 'submodules' inside the IP block.  This function will
  * take the submodule out of reset and wait until the PRCM indicates
- * that the reset has completed before returning.  Returns 0 upon success or
- * -EINVAL upon an argument error, -EEXIST if the submodule was already out
- * of reset, or -EBUSY if the submodule did not exit reset promptly.
+ * that the reset has completed before returning.
  */
 static int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part,
 					 s16 inst, u16 rstctrl_offs,
@@ -315,7 +315,7 @@  static int am33xx_check_vcvp(void)
 }
 
 /**
- * am33xx_prm_global_warm_sw_reset - reboot the device via warm reset
+ * am33xx_prm_global_sw_reset - reboot the device via warm reset
  *
  * Immediately reboots the device through warm reset.
  */