new file mode 100644
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hsi/nokia,modem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nokia modem
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - nokia,n900-modem
+ - nokia,n950-modem
+ - nokia,n9-modem
+
+ hsi-channel-ids:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 4
+ maxItems: 4
+
+ hsi-channel-names:
+ items:
+ - const: mcsaab-control
+ - const: speech-control
+ - const: speech-data
+ - const: mcsaab-data
+
+ interrupts:
+ items:
+ - description: modem reset indication
+
+ gpios:
+ minItems: 3
+ maxItems: 5
+
+ gpio-names:
+ items:
+ - const: cmt_apeslpx
+ - const: cmt_rst_rq
+ - const: cmt_en
+ - const: cmt_rst
+ - const: cmt_bsi
+ minItems: 3
+
+required:
+ - gpios
+ - gpio-names
+ - interrupts
+
+allOf:
+ - $ref: hsi-client.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nokia,n950-modem
+ - nokia,n9-modem
+ then:
+ properties:
+ gpios:
+ maxItems: 3
+ gpio-names:
+ maxItems: 3
+ else:
+ properties:
+ gpios:
+ minItems: 5
+ gpio-names:
+ minItems: 5
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ modem {
+ compatible = "nokia,n900-modem";
+
+ hsi-channel-ids = <0>, <1>, <2>, <3>;
+ hsi-channel-names = "mcsaab-control",
+ "speech-control",
+ "speech-data",
+ "mcsaab-data";
+ hsi-speed-kbps = <55000>;
+ hsi-mode = "frame";
+ hsi-flow = "synchronized";
+ hsi-arb-mode = "round-robin";
+
+ interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>;
+
+ gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>,
+ <&gpio3 9 GPIO_ACTIVE_HIGH>,
+ <&gpio3 10 GPIO_ACTIVE_HIGH>,
+ <&gpio3 11 GPIO_ACTIVE_HIGH>,
+ <&gpio5 29 GPIO_ACTIVE_HIGH>;
+ gpio-names = "cmt_apeslpx",
+ "cmt_rst_rq",
+ "cmt_en",
+ "cmt_rst",
+ "cmt_bsi";
+ };
deleted file mode 100644
@@ -1,59 +0,0 @@
-Nokia modem client bindings
-
-The Nokia modem HSI client follows the common HSI client binding
-and inherits all required properties. The following additional
-properties are needed by the Nokia modem HSI client:
-
-Required properties:
-- compatible: Should be one of
- "nokia,n900-modem"
- "nokia,n950-modem"
- "nokia,n9-modem"
-- hsi-channel-names: Should contain the following strings
- "mcsaab-control"
- "speech-control"
- "speech-data"
- "mcsaab-data"
-- gpios: Should provide a GPIO handler for each GPIO listed in
- gpio-names
-- gpio-names: Should contain the following strings
- "cmt_apeslpx" (for n900, n950, n9)
- "cmt_rst_rq" (for n900, n950, n9)
- "cmt_en" (for n900, n950, n9)
- "cmt_rst" (for n900)
- "cmt_bsi" (for n900)
-- interrupts: Should be IRQ handle for modem's reset indication
-
-Example:
-
-&ssi_port {
- modem: hsi-client {
- compatible = "nokia,n900-modem";
-
- pinctrl-names = "default";
- pinctrl-0 = <&modem_pins>;
-
- hsi-channel-ids = <0>, <1>, <2>, <3>;
- hsi-channel-names = "mcsaab-control",
- "speech-control",
- "speech-data",
- "mcsaab-data";
- hsi-speed-kbps = <55000>;
- hsi-mode = "frame";
- hsi-flow = "synchronized";
- hsi-arb-mode = "round-robin";
-
- interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
-
- gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */
- <&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */
- <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
- <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
- <&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
- gpio-names = "cmt_apeslpx",
- "cmt_rst_rq",
- "cmt_en",
- "cmt_rst",
- "cmt_bsi";
- };
-};
Convert the legacy txt binding to modern YAML. No semantic change. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> --- .../devicetree/bindings/hsi/nokia,modem.yaml | 106 +++++++++++++++++++++ .../devicetree/bindings/hsi/nokia-modem.txt | 59 ------------ 2 files changed, 106 insertions(+), 59 deletions(-)