[3/3] power: supply: initial support for TWL6030/32

Message ID	20240918084132.928295-4-andreas@kemnade.info (mailing list archive)
State	New
Headers	show Received: from mail.andi.de1.cc (mail.andi.de1.cc [178.238.236.174]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 6733E1741C8; Wed, 18 Sep 2024 08:41:44 +0000 (UTC) From: Andreas Kemnade <andreas@kemnade.info> To: tony@atomide.com, Sebastian Reichel <sre@kernel.org>, linux-omap@vger.kernel.org, devicetree@vger.kernel.org, Lee Jones <lee@kernel.org>, Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzk+dt@kernel.org>, linux-kernel@vger.kernel.org, Conor Dooley <conor+dt@kernel.org>, linux-pm@vger.kernel.org Cc: Andreas Kemnade <andreas@kemnade.info> Subject: [PATCH 3/3] power: supply: initial support for TWL6030/32 Date: Wed, 18 Sep 2024 10:41:32 +0200 Message-Id: <20240918084132.928295-4-andreas@kemnade.info> In-Reply-To: <20240918084132.928295-1-andreas@kemnade.info> References: <20240918084132.928295-1-andreas@kemnade.info> Precedence: bulk MIME-Version: 1.0 Content-Transfer-Encoding: 8bit
Series	power: supply: twl6030/32 charger \| expand [0/3] power: supply: twl6030/32 charger [1/3] dt-bindings: power: supply: Add TI TWL603X charger [2/3] dt-bindings: mfd: twl: add charger node also for TWL603x [3/3] power: supply: initial support for TWL6030/32

diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index bcfa63fb9f1e2..9f2eef6787f7a 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -493,6 +493,16 @@ config CHARGER_TWL4030 help Say Y here to enable support for TWL4030 Battery Charge Interface. +config CHARGER_TWL6030 + tristate "OMAP TWL6030 BCI charger driver" + depends on IIO && TWL4030_CORE + help + Say Y here to enable support for TWL6030/6032 Battery Charge + Interface. + + This driver can be build as a module. If so, the module will be + called twl6030_charger. + config CHARGER_LP8727 tristate "TI/National Semiconductor LP8727 charger driver" depends on I2C diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile index 8dcb415453171..59c4a9f40d28a 100644 --- a/drivers/power/supply/Makefile +++ b/drivers/power/supply/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_CHARGER_CPCAP) += cpcap-charger.o obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o +obj-$(CONFIG_CHARGER_TWL6030) += twl6030_charger.o obj-$(CONFIG_CHARGER_LP8727) += lp8727_charger.o obj-$(CONFIG_CHARGER_LP8788) += lp8788-charger.o obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o diff --git a/drivers/power/supply/twl6030_charger.c b/drivers/power/supply/twl6030_charger.c new file mode 100644 index 0000000000000..5704b8ca9d22b --- /dev/null +++ b/drivers/power/supply/twl6030_charger.c @@ -0,0 +1,566 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * TWL6030 charger + * + * Copyright (C) 2024 Andreas Kemnade <andreas@kemnade.info> + * + * based on older 6030 driver found in a v3.0 vendor kernel + * + * based on twl4030_bci_battery.c by TI + * Copyright (C) 2008 Texas Instruments, Inc. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/bits.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/mfd/twl.h> +#include <linux/power_supply.h> +#include <linux/notifier.h> +#include <linux/usb/otg.h> +#include <linux/iio/consumer.h> +#include <linux/devm-helpers.h> + +#define CONTROLLER_INT_MASK 0x00 +#define CONTROLLER_CTRL1 0x01 +#define CONTROLLER_WDG 0x02 +#define CONTROLLER_STAT1 0x03 +#define CHARGERUSB_INT_STATUS 0x04 +#define CHARGERUSB_INT_MASK 0x05 +#define CHARGERUSB_STATUS_INT1 0x06 +#define CHARGERUSB_STATUS_INT2 0x07 +#define CHARGERUSB_CTRL1 0x08 +#define CHARGERUSB_CTRL2 0x09 +#define CHARGERUSB_CTRL3 0x0A +#define CHARGERUSB_STAT1 0x0B +#define CHARGERUSB_VOREG 0x0C +#define CHARGERUSB_VICHRG 0x0D +#define CHARGERUSB_CINLIMIT 0x0E +#define CHARGERUSB_CTRLLIMIT1 0x0F +#define CHARGERUSB_CTRLLIMIT2 0x10 +#define ANTICOLLAPSE_CTRL1 0x11 +#define ANTICOLLAPSE_CTRL2 0x12 + +/* TWL6032 registers 0xDA to 0xDE - TWL6032_MODULE_CHARGER */ +#define CONTROLLER_CTRL2 0x00 +#define CONTROLLER_VSEL_COMP 0x01 +#define CHARGERUSB_VSYSREG 0x02 +#define CHARGERUSB_VICHRG_PC 0x03 +#define LINEAR_CHRG_STS 0x04 + +#define LINEAR_CHRG_STS_CRYSTL_OSC_OK 0x40 +#define LINEAR_CHRG_STS_END_OF_CHARGE 0x20 +#define LINEAR_CHRG_STS_VBATOV 0x10 +#define LINEAR_CHRG_STS_VSYSOV 0x08 +#define LINEAR_CHRG_STS_DPPM_STS 0x04 +#define LINEAR_CHRG_STS_CV_STS 0x02 +#define LINEAR_CHRG_STS_CC_STS 0x01 + +#define FG_REG_00 0x00 +#define FG_REG_01 0x01 +#define FG_REG_02 0x02 +#define FG_REG_03 0x03 +#define FG_REG_04 0x04 +#define FG_REG_05 0x05 +#define FG_REG_06 0x06 +#define FG_REG_07 0x07 +#define FG_REG_08 0x08 +#define FG_REG_09 0x09 +#define FG_REG_10 0x0A +#define FG_REG_11 0x0B + +/* CONTROLLER_INT_MASK */ +#define MVAC_FAULT BIT(7) +#define MAC_EOC BIT(6) +#define LINCH_GATED BIT(5) +#define MBAT_REMOVED BIT(4) +#define MFAULT_WDG BIT(3) +#define MBAT_TEMP BIT(2) +#define MVBUS_DET BIT(1) +#define MVAC_DET BIT(0) + +/* CONTROLLER_CTRL1 */ +#define CONTROLLER_CTRL1_EN_LINCH BIT(5) +#define CONTROLLER_CTRL1_EN_CHARGER BIT(4) +#define CONTROLLER_CTRL1_SEL_CHARGER BIT(3) + +/* CONTROLLER_STAT1 */ +#define CONTROLLER_STAT1_EXTCHRG_STATZ BIT(7) +#define CONTROLLER_STAT1_LINCH_GATED BIT(6) +#define CONTROLLER_STAT1_CHRG_DET_N BIT(5) +#define CONTROLLER_STAT1_FAULT_WDG BIT(4) +#define CONTROLLER_STAT1_VAC_DET BIT(3) +#define VAC_DET BIT(3) +#define CONTROLLER_STAT1_VBUS_DET BIT(2) +#define VBUS_DET BIT(2) +#define CONTROLLER_STAT1_BAT_REMOVED BIT(1) +#define CONTROLLER_STAT1_BAT_TEMP_OVRANGE BIT(0) + +/* CHARGERUSB_INT_STATUS */ +#define EN_LINCH BIT(4) +#define CURRENT_TERM_INT BIT(3) +#define CHARGERUSB_STAT BIT(2) +#define CHARGERUSB_THMREG BIT(1) +#define CHARGERUSB_FAULT BIT(0) + +/* CHARGERUSB_INT_MASK */ +#define MASK_MCURRENT_TERM BIT(3) +#define MASK_MCHARGERUSB_STAT BIT(2) +#define MASK_MCHARGERUSB_THMREG BIT(1) +#define MASK_MCHARGERUSB_FAULT BIT(0) + +/* CHARGERUSB_STATUS_INT1 */ +#define CHARGERUSB_STATUS_INT1_TMREG BIT(7) +#define CHARGERUSB_STATUS_INT1_NO_BAT BIT(6) +#define CHARGERUSB_STATUS_INT1_BST_OCP BIT(5) +#define CHARGERUSB_STATUS_INT1_TH_SHUTD BIT(4) +#define CHARGERUSB_STATUS_INT1_BAT_OVP BIT(3) +#define CHARGERUSB_STATUS_INT1_POOR_SRC BIT(2) +#define CHARGERUSB_STATUS_INT1_SLP_MODE BIT(1) +#define CHARGERUSB_STATUS_INT1_VBUS_OVP BIT(0) + +/* CHARGERUSB_STATUS_INT2 */ +#define ICCLOOP BIT(3) +#define CURRENT_TERM BIT(2) +#define CHARGE_DONE BIT(1) +#define ANTICOLLAPSE BIT(0) + +/* CHARGERUSB_CTRL1 */ +#define SUSPEND_BOOT BIT(7) +#define OPA_MODE BIT(6) +#define HZ_MODE BIT(5) +#define TERM BIT(4) + +/* CHARGERUSB_CTRL2 */ +#define UA_TO_VITERM(x) (((x) / 50000 - 1) << 5) + +/* CHARGERUSB_CTRL3 */ +#define VBUSCHRG_LDO_OVRD BIT(7) +#define CHARGE_ONCE BIT(6) +#define BST_HW_PR_DIS BIT(5) +#define AUTOSUPPLY BIT(3) +#define BUCK_HSILIM BIT(0) + +/* CHARGERUSB_VOREG */ +#define UV_TO_VOREG(x) (((x) - 3500000) / 20000) +#define VOREG_TO_UV(x) (((x) & 0x3F) * 20000 + 3500000) +#define CHARGERUSB_VOREG_3P52 0x01 +#define CHARGERUSB_VOREG_4P0 0x19 +#define CHARGERUSB_VOREG_4P2 0x23 +#define CHARGERUSB_VOREG_4P76 0x3F + +/* CHARGERUSB_VICHRG */ +/* + * might be inaccurate for < 500 mA, diffent scale might apply, + * either starting from 100 mA or 300 mA + */ +#define UA_TO_VICHRG(x) (((x) / 100000) - 1) +#define VICHRG_TO_UA(x) (((x) & 0xf) * 100000 + 100000) + +/* CHARGERUSB_CINLIMIT */ +#define CHARGERUSB_CIN_LIMIT_100 0x1 +#define CHARGERUSB_CIN_LIMIT_300 0x5 +#define CHARGERUSB_CIN_LIMIT_500 0x9 +#define CHARGERUSB_CIN_LIMIT_NONE 0xF + +/* CHARGERUSB_CTRLLIMIT2 */ +#define CHARGERUSB_CTRLLIMIT2_1500 0x0E +#define LOCK_LIMIT BIT(4) + +/* ANTICOLLAPSE_CTRL2 */ +#define BUCK_VTH_SHIFT 5 + +/* FG_REG_00 */ +#define CC_ACTIVE_MODE_SHIFT 6 +#define CC_AUTOCLEAR BIT(2) +#define CC_CAL_EN BIT(1) +#define CC_PAUSE BIT(0) + +#define REG_TOGGLE1 0x90 +#define REG_PWDNSTATUS1 0x93 +#define FGDITHS BIT(7) +#define FGDITHR BIT(6) +#define FGS BIT(5) +#define FGR BIT(4) +#define BBSPOR_CFG 0xE6 +#define BB_CHG_EN BIT(3) + +struct twl6030_charger_info { + struct device *dev; + struct power_supply *usb; + struct power_supply_battery_info *binfo; + struct work_struct work; + int irq_chg; + int input_current_limit; + struct iio_channel *channel_vusb; + struct delayed_work charger_monitor; +}; + +static int twl6030_charger_read(u8 reg, u8 *val) +{ + return twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, val, reg); +} + +static int twl6030_charger_write(u8 reg, u8 val) +{ + return twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, val, reg); +} + +static int twl6030_config_cinlimit_reg(struct twl6030_charger_info *charger, + unsigned int ua) +{ + if (ua >= 50000 && ua <= 750000) { + ua = (ua - 50000) / 50000; + } else if ((ua > 750000) && (ua <= 1500000) && + (device_is_compatible(charger->dev, "ti,twl6032-charger"))) { + ua = ((ua % 100000) ? 0x30 : 0x20) + ((ua - 100000) / 100000); + } else { + if (ua < 50000) { + dev_err(charger->dev, "invalid input current limit\n"); + return -EINVAL; + } + /* This is no current limit */ + ua = 0x0F; + } + + return twl6030_charger_write(CHARGERUSB_CINLIMIT, ua); +} + +/* + * rewriting all stuff here, resets to extremely conservative defaults were + * seen under some circumstances, like charge voltage to 3.5V + */ +static int twl6030_enable_usb(struct twl6030_charger_info *charger) +{ + int ret; + + ret = twl6030_charger_write(CHARGERUSB_VICHRG, + UA_TO_VICHRG(charger->binfo->constant_charge_current_max_ua)); + if (ret < 0) + return ret; + + ret = twl6030_charger_write(CONTROLLER_WDG, 0xff); + if (ret < 0) + return ret; + + charger->input_current_limit = 500000; + ret = twl6030_config_cinlimit_reg(charger, charger->input_current_limit); + if (ret < 0) + return ret; + + ret = twl6030_charger_write(CHARGERUSB_CINLIMIT, CHARGERUSB_CIN_LIMIT_500); + if (ret < 0) + return ret; + + ret = twl6030_charger_write(CHARGERUSB_VOREG, + UV_TO_VOREG(charger->binfo->constant_charge_voltage_max_uv)); + if (ret < 0) + return ret; + + ret = twl6030_charger_write(CHARGERUSB_CTRL1, TERM); + if (ret < 0) + return ret; + + if (charger->binfo->charge_term_current_ua != -EINVAL) { + ret = twl6030_charger_write(CHARGERUSB_CTRL2, + UA_TO_VITERM(charger->binfo->charge_term_current_ua)); + if (ret < 0) + return ret; + } + + return twl6030_charger_write(CONTROLLER_CTRL1, CONTROLLER_CTRL1_EN_CHARGER); +} + +static void twl6030_charger_wdg(struct work_struct *data) +{ + struct twl6030_charger_info *charger = + container_of(data, struct twl6030_charger_info, + charger_monitor.work); + + u8 val; + u8 int_stat; + u8 stat_int1; + u8 stat_int2; + + twl6030_charger_read(CONTROLLER_STAT1, &val); + twl6030_charger_read(CHARGERUSB_INT_STATUS, &int_stat); + twl6030_charger_read(CHARGERUSB_STATUS_INT1, &stat_int1); + twl6030_charger_read(CHARGERUSB_STATUS_INT2, &stat_int2); + dev_dbg(charger->dev, + "wdg: stat1: %02x %s INT_STATUS %02x STATUS_INT1 %02x STATUS_INT2 %02x\n", + val, (val & VBUS_DET) ? "usb online" : "usb offline", + int_stat, stat_int1, stat_int2); + + twl6030_charger_write(CONTROLLER_WDG, 0xff); + schedule_delayed_work(&charger->charger_monitor, + msecs_to_jiffies(10000)); +} + +static irqreturn_t twl6030_charger_interrupt(int irq, void *arg) +{ + struct twl6030_charger_info *charger = arg; + u8 val; + u8 int_stat; + u8 stat_int1; + u8 stat_int2; + + if (twl6030_charger_read(CONTROLLER_STAT1, &val) < 0) + return IRQ_HANDLED; + + if (twl6030_charger_read(CHARGERUSB_INT_STATUS, &int_stat) < 0) + return IRQ_HANDLED; + + if (twl6030_charger_read(CHARGERUSB_STATUS_INT1, &stat_int1) < 0) + return IRQ_HANDLED; + + if (twl6030_charger_read(CHARGERUSB_STATUS_INT2, &stat_int2) < 0) + return IRQ_HANDLED; + + dev_dbg(charger->dev, + "charger irq: stat1: %02x %s INT_STATUS %02x STATUS_INT1 %02x STATUS_INT2 %02x\n", + val, (val & VBUS_DET) ? "usb online" : "usb offline", + int_stat, stat_int1, stat_int2); + power_supply_changed(charger->usb); + + if (val & VBUS_DET) { + if (twl6030_charger_read(CONTROLLER_CTRL1, &val) < 0) + return IRQ_HANDLED; + + if (!(val & CONTROLLER_CTRL1_EN_CHARGER)) { + if (twl6030_enable_usb(charger) < 0) + return IRQ_HANDLED; + + schedule_delayed_work(&charger->charger_monitor, + msecs_to_jiffies(10000)); + } + } else { + cancel_delayed_work(&charger->charger_monitor); + } + return IRQ_HANDLED; +} + +static int twl6030_charger_usb_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct twl6030_charger_info *charger = power_supply_get_drvdata(psy); + int ret; + u8 stat1; + + ret = twl6030_charger_read(CONTROLLER_STAT1, &stat1); + if (ret) + return ret; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + u8 intstat; + + if (!(stat1 & VBUS_DET)) { + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + } + ret = twl6030_charger_read(CHARGERUSB_STATUS_INT2, &intstat); + if (ret) + return ret; + + if (intstat & CHARGE_DONE) + val->intval = POWER_SUPPLY_STATUS_FULL; + else if (intstat & CURRENT_TERM) + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_CHARGING; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + if (!charger->channel_vusb) + return -ENODATA; + + ret = iio_read_channel_processed_scale(charger->channel_vusb, &val->intval, 1000); + if (ret < 0) + return ret; + + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = !!(stat1 & VBUS_DET); + break; + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + val->intval = charger->input_current_limit; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int twl6030_charger_usb_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct twl6030_charger_info *charger = power_supply_get_drvdata(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + charger->input_current_limit = val->intval; + return twl6030_config_cinlimit_reg(charger, charger->input_current_limit); + default: + return -EINVAL; + } + + return 0; +} + +static int twl6030_charger_usb_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + dev_info(&psy->dev, "is %d writeable?\n", (int)psp); + switch (psp) { + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + return true; + default: + return false; + } +} + +static enum power_supply_property twl6030_charger_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, +}; + +static const struct power_supply_desc twl6030_charger_usb_desc = { + .name = "twl6030_usb", + .type = POWER_SUPPLY_TYPE_USB, + .properties = twl6030_charger_props, + .num_properties = ARRAY_SIZE(twl6030_charger_props), + .get_property = twl6030_charger_usb_get_property, + .set_property = twl6030_charger_usb_set_property, + .property_is_writeable = twl6030_charger_usb_property_is_writeable, +}; + +static int twl6030_charger_probe(struct platform_device *pdev) +{ + struct twl6030_charger_info *charger; + struct power_supply_config psy_cfg = {}; + int ret; + u8 val; + + charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL); + if (!charger) + return -ENOMEM; + + charger->dev = &pdev->dev; + charger->irq_chg = platform_get_irq(pdev, 0); + + platform_set_drvdata(pdev, charger); + psy_cfg.drv_data = charger; + + charger->channel_vusb = devm_iio_channel_get(&pdev->dev, "vusb"); + if (IS_ERR(charger->channel_vusb)) { + ret = PTR_ERR(charger->channel_vusb); + if (ret == -EPROBE_DEFER) + return ret; /* iio not ready */ + dev_warn(&pdev->dev, "could not request vusb iio channel (%d)", + ret); + charger->channel_vusb = NULL; + } + + charger->usb = devm_power_supply_register(&pdev->dev, + &twl6030_charger_usb_desc, + &psy_cfg); + if (IS_ERR(charger->usb)) { + return dev_err_probe(&pdev->dev, PTR_ERR(charger->usb), + "Failed to register usb\n"); + } + + ret = power_supply_get_battery_info(charger->usb, &charger->binfo); + if (ret < 0) + return dev_err_probe(&pdev->dev, ret, + "Failed to get battery info\n"); + + dev_info(&pdev->dev, "battery with vmax %d imax: %d\n", + charger->binfo->constant_charge_voltage_max_uv, + charger->binfo->constant_charge_current_max_ua); + + if (charger->binfo->constant_charge_voltage_max_uv == -EINVAL) { + ret = twl6030_charger_read(CHARGERUSB_CTRLLIMIT1, &val); + if (ret < 0) + return ret; + + charger->binfo->constant_charge_voltage_max_uv = + VOREG_TO_UV(val); + } + + if (charger->binfo->constant_charge_voltage_max_uv > 4760000 || + charger->binfo->constant_charge_voltage_max_uv < 350000) + return dev_err_probe(&pdev->dev, -EINVAL, + "Invalid charge voltage\n"); + + if (charger->binfo->constant_charge_current_max_ua == -EINVAL) { + ret = twl6030_charger_read(CHARGERUSB_CTRLLIMIT2, &val); + if (ret < 0) + return ret; + + charger->binfo->constant_charge_current_max_ua = VICHRG_TO_UA(val); + } + + if (charger->binfo->constant_charge_current_max_ua < 100000 || + charger->binfo->constant_charge_current_max_ua > 1500000) { + return dev_err_probe(&pdev->dev, -EINVAL, + "Invalid charge current\n"); + } + + if ((charger->binfo->charge_term_current_ua != -EINVAL) && + (charger->binfo->charge_term_current_ua > 400000 || + charger->binfo->charge_term_current_ua < 50000)) { + return dev_err_probe(&pdev->dev, -EINVAL, + "Invalid charge termination current\n"); + } + + ret = devm_delayed_work_autocancel(&pdev->dev, + &charger->charger_monitor, + twl6030_charger_wdg); + if (ret < 0) + return dev_err_probe(&pdev->dev, ret, + "Failed to register delayed work\n"); + + ret = devm_request_threaded_irq(&pdev->dev, charger->irq_chg, NULL, + twl6030_charger_interrupt, + IRQF_ONESHOT, pdev->name, + charger); + if (ret < 0) { + return dev_err_probe(&pdev->dev, ret, + "could not request irq %d\n", + charger->irq_chg); + } + + /* turing to charging to configure things */ + twl6030_charger_write(CONTROLLER_CTRL1, 0); + twl6030_charger_interrupt(0, charger); + + return 0; +} + +static const struct of_device_id twl_charger_of_match[] __maybe_unused = { + {.compatible = "ti,twl6030-charger", }, + {.compatible = "ti,twl6032-charger", }, + { } +}; +MODULE_DEVICE_TABLE(of, twl_charger_of_match); + +static struct platform_driver twl6030_charger_driver = { + .probe = twl6030_charger_probe, + .driver = { + .name = "twl6030_charger", + .of_match_table = of_match_ptr(twl_charger_of_match), + }, +}; +module_platform_driver(twl6030_charger_driver); + +MODULE_DESCRIPTION("TWL6030 Battery Charger Interface driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:twl6030_charger");

[3/3] power: supply: initial support for TWL6030/32

Commit Message

Comments

Patch