From patchwork Mon Nov 4 07:44:20 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Siddharth Vadapalli X-Patchwork-Id: 13861002 Received: from fllv0016.ext.ti.com (fllv0016.ext.ti.com [198.47.19.142]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 6533818C91D; Mon, 4 Nov 2024 07:44:58 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=198.47.19.142 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730706300; cv=none; b=FADVhJ8shT2xRV/QQ72Amc7dOi74HCrNosDy0VbXO1hdPYUPLOugvJ7BWjSs4dSHTEJRsb6xoF8EmZyi3aSdT2qvXSJgGoaAFPgOt0/di3VBZ4zjSuoCYGU7fEMNZ4bvvAzaa7gcIbTjX6xIznAxUxqcofn5JiUjGXNIDq0E8Zo= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730706300; c=relaxed/simple; bh=sXlF1I6gJMnXOR2kcQblYeKBKy9K5X1HlVpDHibIC8w=; h=From:To:CC:Subject:Date:Message-ID:MIME-Version:Content-Type; b=fkZPQEnN2YWffa8cc6N0ng2ct4LUIfJfhjTviQt1Gi1EMZJgEkxr1zaMlGEd4ii9t/mfVv4L9GNVs+q3Kn3E+/i/pmO1H/QnulPl03Zryp2hYdOLHAJiPb2ZjFi/bNE5KmkkyxGGN9AR7vD/7OIRZaCNHdvDrHwuiTD2IKZX7yA= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com; spf=pass smtp.mailfrom=ti.com; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b=lmHbUCcj; arc=none smtp.client-ip=198.47.19.142 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=ti.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b="lmHbUCcj" Received: from fllv0035.itg.ti.com ([10.64.41.0]) by fllv0016.ext.ti.com (8.15.2/8.15.2) with ESMTP id 4A47iPJM075574; Mon, 4 Nov 2024 01:44:25 -0600 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1730706265; bh=RBpswuLRxOZxNXlnIrevuU+zJUadRtGK4fTa3G3D7Cs=; h=From:To:CC:Subject:Date; b=lmHbUCcjSgY9hRjxgEpM8GRznC74D1elqB7AoasARInL54BaRHmUY4sGSOZSQwPe/ 1bNijh5yvg+YXTmJVH0Zuokrs3Q09Oxp2tzYVhWpPt+ZsJYM8cGesb/0cQ+vUXhYXS mfLCxPDjDHfA9o9PQVTZ8wJb39n/RcBWDGQmbvF8= Received: from DLEE113.ent.ti.com (dlee113.ent.ti.com [157.170.170.24]) by fllv0035.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 4A47iPqx117294 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Mon, 4 Nov 2024 01:44:25 -0600 Received: from DLEE105.ent.ti.com (157.170.170.35) by DLEE113.ent.ti.com (157.170.170.24) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2507.23; Mon, 4 Nov 2024 01:44:25 -0600 Received: from lelvsmtp5.itg.ti.com (10.180.75.250) by DLEE105.ent.ti.com (157.170.170.35) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2507.23 via Frontend Transport; Mon, 4 Nov 2024 01:44:25 -0600 Received: from uda0492258.dhcp.ti.com (uda0492258.dhcp.ti.com [10.24.72.81]) by lelvsmtp5.itg.ti.com (8.15.2/8.15.2) with ESMTP id 4A47iKNV076611; Mon, 4 Nov 2024 01:44:21 -0600 From: Siddharth Vadapalli To: , , , , , , , CC: , , , , , Subject: [PATCH v2] PCI: j721e: Deassert PERST# after a delay of PCIE_T_PVPERL_MS ms Date: Mon, 4 Nov 2024 13:14:20 +0530 Message-ID: <20241104074420.1862932-1-s-vadapalli@ti.com> X-Mailer: git-send-email 2.40.1 Precedence: bulk X-Mailing-List: linux-omap@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-C2ProcessedOrg: 333ef613-75bf-4e12-a4b1-8e3623f5dcea According to Section 2.2 of the PCI Express Card Electromechanical Specification (Revision 5.1), in order to ensure that the power and the reference clock are stable, PERST# has to be deasserted after a delay of 100 milliseconds (TPVPERL). Currently, it is being assumed that the power is already stable, which is not necessarily true. Hence, change the delay to PCIE_T_PVPERL_MS to guarantee that power and reference clock are stable. Fixes: f3e25911a430 ("PCI: j721e: Add TI J721E PCIe driver") Fixes: f96b69713733 ("PCI: j721e: Use T_PERST_CLK_US macro") Signed-off-by: Siddharth Vadapalli --- Hello, This patch is based on commit 59b723cd2adb Linux 6.12-rc6 of Mainline Linux. v1: https://lore.kernel.org/r/20241022083147.2773123-1-s-vadapalli@ti.com/ Changes since v1: - Rebased patch on Linux 6.12-rc6 - Based on Krzysztof's feedback at: https://lore.kernel.org/r/20241102141914.GA3440781@rocinante/ PCIE_T_PERST_CLK_US has been replaced with PCIE_T_PVPERL_MS in j721e_pcie_probe() as well. - Added Fixes tag corresponding to the above change in the commit message. Regards, Siddharth. drivers/pci/controller/cadence/pci-j721e.c | 26 ++++++++++------------ 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c index 284f2e0e4d26..e091c3e55b5c 100644 --- a/drivers/pci/controller/cadence/pci-j721e.c +++ b/drivers/pci/controller/cadence/pci-j721e.c @@ -572,15 +572,14 @@ static int j721e_pcie_probe(struct platform_device *pdev) pcie->refclk = clk; /* - * The "Power Sequencing and Reset Signal Timings" table of the - * PCI Express Card Electromechanical Specification, Revision - * 5.1, Section 2.9.2, Symbol "T_PERST-CLK", indicates PERST# - * should be deasserted after minimum of 100us once REFCLK is - * stable. The REFCLK to the connector in RC mode is selected - * while enabling the PHY. So deassert PERST# after 100 us. + * Section 2.2 of the PCI Express Card Electromechanical + * Specification (Revision 5.1) mandates that the deassertion + * of the PERST# signal should be delayed by 100 ms (TPVPERL). + * This shall ensure that the power and the reference clock + * are stable. */ if (gpiod) { - fsleep(PCIE_T_PERST_CLK_US); + msleep(PCIE_T_PVPERL_MS); gpiod_set_value_cansleep(gpiod, 1); } @@ -671,15 +670,14 @@ static int j721e_pcie_resume_noirq(struct device *dev) return ret; /* - * The "Power Sequencing and Reset Signal Timings" table of the - * PCI Express Card Electromechanical Specification, Revision - * 5.1, Section 2.9.2, Symbol "T_PERST-CLK", indicates PERST# - * should be deasserted after minimum of 100us once REFCLK is - * stable. The REFCLK to the connector in RC mode is selected - * while enabling the PHY. So deassert PERST# after 100 us. + * Section 2.2 of the PCI Express Card Electromechanical + * Specification (Revision 5.1) mandates that the deassertion + * of the PERST# signal should be delayed by 100 ms (TPVPERL). + * This shall ensure that the power and the reference clock + * are stable. */ if (pcie->reset_gpio) { - fsleep(PCIE_T_PERST_CLK_US); + msleep(PCIE_T_PVPERL_MS); gpiod_set_value_cansleep(pcie->reset_gpio, 1); }