@@ -16,7 +16,7 @@ merged to this clock. The component clocks shall be of one of the
"ti,*composite*-clock" types.
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/ti/mux.txt
+[2] Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml
[3] Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml
[4] Documentation/devicetree/bindings/clock/ti/gate.txt
deleted file mode 100644
@@ -1,78 +0,0 @@
-Binding for TI mux clock.
-
-This binding uses the common clock binding[1]. It assumes a
-register-mapped multiplexer with multiple input clock signals or
-parents, one of which can be selected as output. This clock does not
-gate or adjust the parent rate via a divider or multiplier.
-
-By default the "clocks" property lists the parents in the same order
-as they are programmed into the register. E.g:
-
- clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>;
-
-results in programming the register as follows:
-
-register value selected parent clock
-0 foo_clock
-1 bar_clock
-2 baz_clock
-
-Some clock controller IPs do not allow a value of zero to be programmed
-into the register, instead indexing begins at 1. The optional property
-"index-starts-at-one" modified the scheme as follows:
-
-register value selected clock parent
-1 foo_clock
-2 bar_clock
-3 baz_clock
-
-The binding must provide the register to control the mux. Optionally
-the number of bits to shift the control field in the register can be
-supplied. If the shift value is missing it is the same as supplying
-a zero shift.
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be "ti,mux-clock" or "ti,composite-mux-clock".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : link phandles of parent clocks
-- reg : register offset for register controlling adjustable mux
-
-Optional properties:
-- clock-output-names : from common clock binding.
-- ti,bit-shift : number of bits to shift the bit-mask, defaults to
- 0 if not present
-- ti,index-starts-at-one : valid input select programming starts at 1, not
- zero
-- ti,set-rate-parent : clk_set_rate is propagated to parent clock,
- not supported by the composite-mux-clock subtype
-- ti,latch-bit : latch the mux value to HW, only needed if the register
- access requires this. As an example, dra7x DPLL_GMAC H14 muxing
- implements such behavior.
-
-Examples:
-
-sys_clkin_ck: sys_clkin_ck@4a306110 {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
- reg = <0x0110>;
- ti,index-starts-at-one;
-};
-
-abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@4a306108 {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
- ti,bit-shift = <24>;
- reg = <0x0108>;
-};
-
-mcbsp5_mux_fck: mcbsp5_mux_fck {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&core_96m_fck>, <&mcbsp_clks>;
- ti,bit-shift = <4>;
- reg = <0x02d8>;
-};
new file mode 100644
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,mux-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments mux clock
+
+maintainers:
+ - Tero Kristo <kristo@kernel.org>
+
+description: |
+ This clock assumes a register-mapped multiplexer with multiple inpt clock
+ signals or parents, one of which can be selected as output. This clock does
+ not gate or adjust the parent rate via a divider or multiplier.
+
+ By default the "clocks" property lists the parents in the same order
+ as they are programmed into the register. E.g:
+
+ clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>;
+
+ Results in programming the register as follows:
+
+ register value selected parent clock
+ 0 foo_clock
+ 1 bar_clock
+ 2 baz_clock
+
+ Some clock controller IPs do not allow a value of zero to be programmed
+ into the register, instead indexing begins at 1. The optional property
+ "index-starts-at-one" modified the scheme as follows:
+
+ register value selected clock parent
+ 1 foo_clock
+ 2 bar_clock
+ 3 baz_clock
+
+ The binding must provide the register to control the mux. Optionally
+ the number of bits to shift the control field in the register can be
+ supplied. If the shift value is missing it is the same as supplying
+ a zero shift.
+
+properties:
+ compatible:
+ enum:
+ - ti,mux-clock
+ - ti,composite-mux-clock
+
+ "#clock-cells":
+ const: 0
+
+ clocks: true
+
+ clock-output-names:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ ti,bit-shift:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Number of bits to shift the bit-mask
+ maximum: 31
+ default: 0
+
+ ti,index-starts-at-one:
+ type: boolean
+ description:
+ Valid input select programming starts at 1, not zero
+
+ ti,set-rate-parent:
+ type: boolean
+ description:
+ clk_set_rate is propagated to parent clock,
+ not supported by the composite-mux-clock subtype.
+
+ ti,latch-bit:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Latch the mux value to HW, only needed if the register
+ access requires this. As an example, dra7x DPLL_GMAC H14 muxing
+ implements such behavior.
+ maximum: 31
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: ti,composite-mux-clock
+then:
+ properties:
+ ti,set-rate-parent: false
+
+required:
+ - compatible
+ - "#clock-cells"
+ - clocks
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clock-controller@110 {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>;
+ reg = <0x0110>;
+ ti,index-starts-at-one;
+ ti,set-rate-parent;
+ };
+
+ clock-controller@120 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&core_96m_fck>, <&mcbsp_clks>;
+ ti,bit-shift = <4>;
+ reg = <0x0120>;
+ };
+ };
Convert the OMAP mux clock device tree binding to json-schema. Specify the creator of the original binding as a maintainer. Choose GPL-only license because original binding was also GPL. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> --- Changes in V2: - some orthography fixes - fix addresses in example - no prose for defaults - constraints for latch-bit .../bindings/clock/ti/composite.txt | 2 +- .../devicetree/bindings/clock/ti/mux.txt | 78 ----------- .../bindings/clock/ti/ti,mux-clock.yaml | 125 ++++++++++++++++++ 3 files changed, 126 insertions(+), 79 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/ti/mux.txt create mode 100644 Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml