diff mbox

[0/1] Fix OMAP2 NAND ONFI device detection

Message ID 20980858CB6D3A4BAE95CA194937D5E73EA31BB3@DBDE04.ent.ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

pekon gupta Nov. 6, 2013, 10 p.m. UTC
> From: Ezequiel Garcia

[...]

> But: on the other hand, I'd really like you to convince me as to

> why is it so bad to require the DTB to have the proper GPMC bus width.

> 

No its not at all bad, all I want is either of the one way (not mixture of both).
- Either depend on DT completely (which is current case for all drivers)
- OR depend on ONFI and nand_flash_id[] for bus-width detection.


> Once again:

> 1. the NAND devices aren't hot-pluggable

> 2. the "user" (who is actually an engineer, not some regular dummy user)

> knows perfectly well the width of the device.

> 

> What's the problem with describing the hardware in the DT and saving us

> lots of runtime re-configuration trouble?


I agree with both your arguments above.
So shouldn't we kill NAND_BUSWIDTH_AUTO ?
And probably therefore  NAND_BUSWIDTH_AUTO isn't that popular.

Now what remains is ONFI probe, which should always happen in x8 mode.
So for that below patch should be sufficient ..

----------------------
------------------------- 


with regards, pekon

Comments

Ezequiel Garcia Nov. 6, 2013, 10:38 p.m. UTC | #1
On Wed, Nov 06, 2013 at 10:00:09PM +0000, Gupta, Pekon wrote:
> > From: Ezequiel Garcia
> [...]
> 
> > But: on the other hand, I'd really like you to convince me as to
> > why is it so bad to require the DTB to have the proper GPMC bus width.
> > 
> No its not at all bad, all I want is either of the one way (not mixture of both).
> - Either depend on DT completely (which is current case for all drivers)
> - OR depend on ONFI and nand_flash_id[] for bus-width detection.
> 
> 
> > Once again:
> > 1. the NAND devices aren't hot-pluggable
> > 2. the "user" (who is actually an engineer, not some regular dummy user)
> > knows perfectly well the width of the device.
> > 
> > What's the problem with describing the hardware in the DT and saving us
> > lots of runtime re-configuration trouble?
> 
> I agree with both your arguments above.
> So shouldn't we kill NAND_BUSWIDTH_AUTO ?
> And probably therefore  NAND_BUSWIDTH_AUTO isn't that popular.
> 
> Now what remains is ONFI probe, which should always happen in x8 mode.
> So for that below patch should be sufficient ..
> 

Hm.. that might work. Maybe you should submit this as RFC/PATCH to catch
the attention of some more people. And we can keep discussing on this
new idea...

I should get an 8-bit module for the BBB, so this means I'll be able
to run 8-bit and 16-bit tests.

> ----------------------
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index ec1db1e..d1220fb 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -2942,14 +2942,8 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
>                 chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
>                 return 0;
> 
> -       /*
> -        * ONFI must be probed in 8-bit mode or with NAND_BUSWIDTH_AUTO, not
> -        * with NAND_BUSWIDTH_16
> -        */
> -       if (chip->options & NAND_BUSWIDTH_16) {
> -               pr_err("ONFI cannot be probed in 16-bit mode; aborting\n");
> -               return 0;
> -       }
> +       /* ONFI must be probed in 8-bit mode only */
> +       nand_set_defaults(chip, 0);
> 
>         chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
>         for (i = 0; i < 3; i++) {
> @@ -2962,7 +2956,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
> 
>         if (i == 3) {
>                 pr_err("Could not find valid ONFI parameter page; aborting\n");
> -               return 0;
> +               goto return_error;
>         }
> 
>         /* Check version */
> @@ -2980,7 +2974,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
> 
>         if (!chip->onfi_version) {
>                 pr_info("%s: unsupported ONFI version: %d\n", __func__, val);
> -               return 0;
> +               goto return_error;
>         }
> 
>         sanitize_string(p->manufacturer, sizeof(p->manufacturer));
> @@ -3033,6 +3027,12 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
>         }
> 
>         return 1;
> +
> +return_error:
> +       /* revert original bus-width */
> +       nand_set_defaults( chip->options & NAND_BUSWIDTH_16);
> +       return 0;
> +
>  }
> 
>  /*
> ------------------------- 
> 
> 
> with regards, pekon
diff mbox

Patch

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ec1db1e..d1220fb 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2942,14 +2942,8 @@  static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
                chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
                return 0;

-       /*
-        * ONFI must be probed in 8-bit mode or with NAND_BUSWIDTH_AUTO, not
-        * with NAND_BUSWIDTH_16
-        */
-       if (chip->options & NAND_BUSWIDTH_16) {
-               pr_err("ONFI cannot be probed in 16-bit mode; aborting\n");
-               return 0;
-       }
+       /* ONFI must be probed in 8-bit mode only */
+       nand_set_defaults(chip, 0);

        chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
        for (i = 0; i < 3; i++) {
@@ -2962,7 +2956,7 @@  static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,

        if (i == 3) {
                pr_err("Could not find valid ONFI parameter page; aborting\n");
-               return 0;
+               goto return_error;
        }

        /* Check version */
@@ -2980,7 +2974,7 @@  static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,

        if (!chip->onfi_version) {
                pr_info("%s: unsupported ONFI version: %d\n", __func__, val);
-               return 0;
+               goto return_error;
        }

        sanitize_string(p->manufacturer, sizeof(p->manufacturer));
@@ -3033,6 +3027,12 @@  static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
        }

        return 1;
+
+return_error:
+       /* revert original bus-width */
+       nand_set_defaults( chip->options & NAND_BUSWIDTH_16);
+       return 0;
+
 }

 /*