From patchwork Fri Apr 19 20:08:28 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mark Jackson X-Patchwork-Id: 2466881 Return-Path: X-Original-To: patchwork-linux-omap@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork2.kernel.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by patchwork2.kernel.org (Postfix) with ESMTP id EF6E1DF25A for ; Fri, 19 Apr 2013 20:08:32 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753535Ab3DSUIc (ORCPT ); Fri, 19 Apr 2013 16:08:32 -0400 Received: from mercuryimc.plus.com ([80.229.200.144]:43316 "EHLO centos1.newflow.co.uk" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1753135Ab3DSUIb (ORCPT ); Fri, 19 Apr 2013 16:08:31 -0400 Received: from [10.1.0.107] (unknown [176.62.209.156]) by centos1.newflow.co.uk (Postfix) with ESMTP id 45AEF26B8035; Fri, 19 Apr 2013 21:08:29 +0100 (BST) Message-ID: <5171A43C.7040602@newflow.co.uk> Date: Fri, 19 Apr 2013 21:08:28 +0100 From: Mark Jackson User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/20130329 Thunderbird/17.0.5 MIME-Version: 1.0 To: "linux-omap@vger.kernel.org" CC: b-cousson@ti.com, tony@atomide.com, devicetree-discuss@lists.ozlabs.org Subject: [PATCH] ARM: OMAP2+: Allow NAND transfer mode to be specified in DT Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org OMAP devices support various NAND transfer modes. Currently all device-tree definitions will use the default "prefetch polled" mode, so this patch enables the transfer mode to be specified in the device-tree. Acked-by: Pekon Gupta --- .../devicetree/bindings/mtd/gpmc-nand.txt | 8 ++++++++ arch/arm/mach-omap2/gpmc.c | 14 ++++++++++++++ 2 files changed, 22 insertions(+) gpmc_nand_data->devsize = NAND_BUSWIDTH_16; diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index e7f8d7e..cd4a19b 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -29,6 +29,13 @@ Optional properties: "bch4" 4-bit BCH ecc code "bch8" 8-bit BCH ecc code + - ti,nand-xfer-type: A string setting the data transfer type. One of: + + "prefetch-polled" Prefetch polled mode (default) + "polled" Polled mode, without prefetch + "prefetch-dma" Prefetch enabled sDMA mode + "prefetch-irq" Prefetch enabled irq mode + - elm_id: Specifies elm device node. This is required to support BCH error correction using ELM module. @@ -55,6 +62,7 @@ Example for an AM33xx board: reg = <0 0 0>; /* CS0, offset 0 */ nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; + ti,nand-xfer-type = "polled"; gpmc,sync-clk = <0>; gpmc,cs-on = <0>; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 410e1ba..2f47f76 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1212,6 +1212,13 @@ static const char * const nand_ecc_opts[] = { [OMAP_ECC_BCH8_CODE_HW] = "bch8", }; +static const char * const nand_xfer_types[] = { + [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled", + [NAND_OMAP_POLLED] = "polled", + [NAND_OMAP_PREFETCH_DMA] = "prefetch-dma", + [NAND_OMAP_PREFETCH_IRQ] = "prefetch-irq", +}; + static int gpmc_probe_nand_child(struct platform_device *pdev, struct device_node *child) { @@ -1241,6 +1248,13 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, break; } + if (!of_property_read_string(child, "ti,nand-xfer-type", &s)) + for (val = 0; val < ARRAY_SIZE(nand_xfer_types); val++) + if (!strcasecmp(s, nand_xfer_types[val])) { + gpmc_nand_data->xfer_type = val; + break; + } + val = of_get_nand_bus_width(child); if (val == 16)