| Message ID | 55f79e39c13586ebd579b37e8b0055003611a2b2.1571430329.git.hns@goldelico.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | OpenPandora: make wl1251 connected to mmc3 sdio port of OpenPandora work again | expand |
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt index bb2fcde6f7ff..88612ff29f2d 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt +++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt @@ -35,3 +35,29 @@ Examples: ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */ }; }; + +&mmc3 { + vmmc-supply = <&wlan_en>; + + bus-width = <4>; + non-removable; + ti,non-removable; + cap-power-off-card; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + wlan: wl1251@1 { + compatible = "ti,wl1251"; + + reg = <1>; + + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_21 */ + + ti,wl1251-has-eeprom; + }; +};
The standard method for sdio devices connected to an sdio interface is to define them as a child node like we can see with wlcore. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> --- .../bindings/net/wireless/ti,wl1251.txt | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+)